Commit f83af24f authored by LeoLiu-oc's avatar LeoLiu-oc Committed by Zheng Zengkai
Browse files

ata: Add support for disabling PhyRdy Change Interrupt based on actual LPM capability

zhaoxin inclusion
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I40QDN


CVE: NA

----------------------------------------------------------------

The ahci spec mentions that PhyRdy Change Interrupt and Link Power
Management (LPM) do not coexist. However, before enabling LPM,
the driver did not check whether the host supports LPM,
but directly disabled PhyRdy Change Interrupt. Increase the
judgment on the actual support of LPM, and disable PhyRdy Change
Interrupt only when it is supported.

Signed-off-by: default avatarLeoLiu-oc <LeoLiu-oc@zhaoxin.com>
Signed-off-by: default avatarZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: default avatarJackie Liu <liuyun01@kylinos.cn>
Reviewed-by: default avatarJason Yan <yanaijie@huawei.com>
parent abe9e1a8
Loading
Loading
Loading
Loading
+11 −0
Original line number Original line Diff line number Diff line
@@ -1881,6 +1881,17 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
	else
	else
		dev_info(&pdev->dev, "SSS flag set, parallel bus scan disabled\n");
		dev_info(&pdev->dev, "SSS flag set, parallel bus scan disabled\n");


	if (pdev->vendor == PCI_VENDOR_ID_ZHAOXIN) {
		if (hpriv->cap & HOST_CAP_PART)
			host->flags |= ATA_HOST_PART;

		if (hpriv->cap & HOST_CAP_SSC)
			host->flags |= ATA_HOST_SSC;

		if (hpriv->cap2 & HOST_CAP2_SDS)
			host->flags |= ATA_HOST_DEVSLP;
	}

	if (pi.flags & ATA_FLAG_EM)
	if (pi.flags & ATA_FLAG_EM)
		ahci_reset_em(host);
		ahci_reset_em(host);


+7 −0
Original line number Original line Diff line number Diff line
@@ -3237,6 +3237,8 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
			  struct ata_device **r_failed_dev)
			  struct ata_device **r_failed_dev)
{
{
	struct ata_port *ap = ata_is_host_link(link) ? link->ap : NULL;
	struct ata_port *ap = ata_is_host_link(link) ? link->ap : NULL;
	struct device *device = ap->host->dev;
	struct pci_dev *pdev = (!device || !dev_is_pci(device)) ? NULL : to_pci_dev(device);
	struct ata_eh_context *ehc = &link->eh_context;
	struct ata_eh_context *ehc = &link->eh_context;
	struct ata_device *dev, *link_dev = NULL, *lpm_dev = NULL;
	struct ata_device *dev, *link_dev = NULL, *lpm_dev = NULL;
	enum ata_lpm_policy old_policy = link->lpm_policy;
	enum ata_lpm_policy old_policy = link->lpm_policy;
@@ -3245,6 +3247,11 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
	unsigned int err_mask;
	unsigned int err_mask;
	int rc;
	int rc;


	/* if controller does not support lpm, then sets no LPM flags*/
	if ((pdev && pdev->vendor == PCI_VENDOR_ID_ZHAOXIN) &&
		!(ap->host->flags & (ATA_HOST_PART | ATA_HOST_SSC | ATA_HOST_DEVSLP)))
		link->flags |= ATA_LFLAG_NO_LPM;

	/* if the link or host doesn't do LPM, noop */
	/* if the link or host doesn't do LPM, noop */
	if (!IS_ENABLED(CONFIG_SATA_HOST) ||
	if (!IS_ENABLED(CONFIG_SATA_HOST) ||
	    (link->flags & ATA_LFLAG_NO_LPM) || (ap && !ap->ops->set_lpm))
	    (link->flags & ATA_LFLAG_NO_LPM) || (ap && !ap->ops->set_lpm))
+4 −0
Original line number Original line Diff line number Diff line
@@ -260,6 +260,10 @@ enum {
	ATA_HOST_PARALLEL_SCAN	= (1 << 2),	/* Ports on this host can be scanned in parallel */
	ATA_HOST_PARALLEL_SCAN	= (1 << 2),	/* Ports on this host can be scanned in parallel */
	ATA_HOST_IGNORE_ATA	= (1 << 3),	/* Ignore ATA devices on this host. */
	ATA_HOST_IGNORE_ATA	= (1 << 3),	/* Ignore ATA devices on this host. */


	ATA_HOST_PART		= (1 << 4), /* Host support partial.*/
	ATA_HOST_SSC		= (1 << 5), /* Host support slumber.*/
	ATA_HOST_DEVSLP		= (1 << 6), /* Host support devslp.*/

	/* bits 24:31 of host->flags are reserved for LLD specific flags */
	/* bits 24:31 of host->flags are reserved for LLD specific flags */


	/* various lengths of time */
	/* various lengths of time */