Commit f1da57d8 authored by Stefan Riedmueller's avatar Stefan Riedmueller Committed by Shawn Guo
Browse files

ARM: dts: imx6ul: segin: Make FEC and ethphy configurable in dts 



To disable Ethernet interfaces in case they are not populated
make the FEC and Ethernet PHY status configurable in the dts files.

Also change the Ethernet PHYs labels to make them correspond to
the MDIO address.

Signed-off-by: default avatarStefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 783c10aa

arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi

+4 −3
Original line number Diff line number Diff line
@@ -42,20 +42,21 @@ 
	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_enet1>;

	phy-mode = "rmii";

	phy-handle = <&ethphy0>;

	status = "okay";

	phy-handle = <&ethphy1>;

	status = "disabled";



	mdio: mdio {

		#address-cells = <1>;

		#size-cells = <0>;



		ethphy0: ethernet-phy@1 {

		ethphy1: ethernet-phy@1 {

			reg = <1>;

			interrupt-parent = <&gpio1>;

			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;

			micrel,led-mode = <1>;

			clocks = <&clks IMX6UL_CLK_ENET_REF>;

			clock-names = "rmii-ref";

			status = "disabled";

		};

	};

};

arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts

+12 −0
Original line number Diff line number Diff line
@@ -34,6 +34,18 @@ 
	status = "okay";

};



&ethphy1 {

	status = "okay";

};



&ethphy2 {

	status = "okay";

};



&fec1 {

	status = "okay";

};



&fec2 {

	status = "okay";

};

arch/arm/boot/dts/imx6ul-phytec-segin.dtsi

+3 −2
Original line number Diff line number Diff line
@@ -107,7 +107,7 @@ 
	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_enet2>;

	phy-mode = "rmii";

	phy-handle = <&ethphy1>;

	phy-handle = <&ethphy2>;

	status = "disabled";

};
@@ -160,11 +160,12 @@ 
};



&mdio {

	ethphy1: ethernet-phy@2 {

	ethphy2: ethernet-phy@2 {

		reg = <2>;

		micrel,led-mode = <1>;

		clocks = <&clks IMX6UL_CLK_ENET2_REF>;

		clock-names = "rmii-ref";

		status = "disabled";

	};

};