Commit f110f318 authored by Nuno Sá's avatar Nuno Sá Committed by Jonathan Cameron
Browse files

iio: temperature: Add support for LTC2983 



The LTC2983 is a Multi-Sensor High Accuracy Digital Temperature
Measurement System. It measures a wide variety of temperature sensors and
digitally outputs the result, in °C or °F, with 0.1°C accuracy and
0.001°C resolution. It can measure the temperature of all standard
thermocouples (type B,E,J,K,N,S,R,T), standard 2-,3-,4-wire RTDs,
thermistors and diodes.

Signed-off-by: default avatarNuno Sá <nuno.sa@analog.com>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent 2f4292a8

MAINTAINERS

+7 −0
Original line number Diff line number Diff line
@@ -9623,6 +9623,13 @@ S: Maintained 
F:	Documentation/devicetree/bindings/iio/dac/ltc1660.txt

F:	drivers/iio/dac/ltc1660.c









LTC2983 IIO TEMPERATURE DRIVER









M:	Nuno Sá <nuno.sa@analog.com>









W:	http://ez.analog.com/community/linux-device-drivers









L:	linux-iio@vger.kernel.org









S:	Supported









F:	drivers/iio/temperature/ltc2983.c

















LTC4261 HARDWARE MONITOR DRIVER









M:	Guenter Roeck <linux@roeck-us.net>









L:	linux-hwmon@vger.kernel.org
































drivers/iio/temperature/Kconfig



+11
−0






























Original line number
Diff line number
Diff line







@@ -4,6 +4,17 @@







#









menu "Temperature sensors"



















config LTC2983









	tristate "Analog Devices Multi-Sensor Digital Temperature Measurement System"









	depends on SPI









	select REGMAP_SPI









	help









	  Say yes here to build support for the LTC2983 Multi-Sensor









	  high accuracy digital temperature measurement system.



















	  To compile this driver as a module, choose M here: the module









	  will be called ltc2983.



















config MAXIM_THERMOCOUPLE









	tristate "Maxim thermocouple sensors"









	depends on SPI
































drivers/iio/temperature/Makefile



+1
−0






























Original line number
Diff line number
Diff line







@@ -3,6 +3,7 @@







# Makefile for industrial I/O temperature drivers









#



















obj-$(CONFIG_LTC2983) += ltc2983.o









obj-$(CONFIG_HID_SENSOR_TEMP) += hid-sensor-temperature.o









obj-$(CONFIG_MAXIM_THERMOCOUPLE) += maxim_thermocouple.o









obj-$(CONFIG_MAX31856) += max31856.o
































drivers/iio/temperature/ltc2983.c
0 → 100644



+1557
−0




























File added.
Preview size limit exceeded, changes collapsed.