Commit eeac7d43 authored by Michael Walle's avatar Michael Walle Committed by David S. Miller
Browse files

net: phy: icplus: don't set APS_EN bit on IP101G



This bit is reserved as 'always-write-1'. While this is not a particular
error, because we are only setting it, guard it by checking the model to
prevent errors in the future.

Signed-off-by: default avatarMichael Walle <michael@walle.cc>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 675115bf
Loading
Loading
Loading
Loading
+20 −7
Original line number Diff line number Diff line
@@ -208,10 +208,10 @@ static int ip101a_g_probe(struct phy_device *phydev)
	return 0;
}

static int ip101a_g_config_init(struct phy_device *phydev)
static int ip101a_g_config_intr_pin(struct phy_device *phydev)
{
	struct ip101a_g_phy_priv *priv = phydev->priv;
	int err, c;
	int err;

	/* configure the RXER/INTR_32 pin of the 32-pin IP101GR if needed: */
	switch (priv->sel_intr32) {
@@ -241,11 +241,24 @@ static int ip101a_g_config_init(struct phy_device *phydev)
		break;
	}

	return 0;
}

static int ip101a_config_init(struct phy_device *phydev)
{
	int ret;

	/* Enable Auto Power Saving mode */
	c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
	c |= IP101A_G_APS_ON;
	ret = phy_set_bits(phydev, IP10XX_SPEC_CTRL_STATUS, IP101A_G_APS_ON);
	if (ret)
		return ret;

	return phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c);
	return ip101a_g_config_intr_pin(phydev);
}

static int ip101g_config_init(struct phy_device *phydev)
{
	return ip101a_g_config_intr_pin(phydev);
}

static int ip101a_g_ack_interrupt(struct phy_device *phydev)
@@ -379,7 +392,7 @@ static struct phy_driver icplus_driver[] = {
	.probe		= ip101a_g_probe,
	.config_intr	= ip101a_g_config_intr,
	.handle_interrupt = ip101a_g_handle_interrupt,
	.config_init	= ip101a_g_config_init,
	.config_init	= ip101a_config_init,
	.soft_reset	= genphy_soft_reset,
	.suspend	= genphy_suspend,
	.resume		= genphy_resume,
@@ -389,7 +402,7 @@ static struct phy_driver icplus_driver[] = {
	.probe		= ip101a_g_probe,
	.config_intr	= ip101a_g_config_intr,
	.handle_interrupt = ip101a_g_handle_interrupt,
	.config_init	= ip101a_g_config_init,
	.config_init	= ip101g_config_init,
	.soft_reset	= genphy_soft_reset,
	.suspend	= genphy_suspend,
	.resume		= genphy_resume,