Commit eceac9d2 authored by Robert Hancock's avatar Robert Hancock Committed by David S. Miller
Browse files

dt-bindings: net: xilinx_axienet: add xlnx,switch-x-sgmii attribute 



Document the new xlnx,switch-x-sgmii attribute which is used to indicate
that the Ethernet core supports dynamic switching between 1000BaseX and
SGMII.

Signed-off-by: default avatarRobert Hancock <robert.hancock@calian.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 66b51663

Documentation/devicetree/bindings/net/xilinx_axienet.txt

+4 −0
Original line number Diff line number Diff line
@@ -38,6 +38,10 @@ Optional properties: 
		  1 to enable partial TX checksum offload,

		  2 to enable full TX checksum offload

- xlnx,rxcsum	: Same values as xlnx,txcsum but for RX checksum offload

- xlnx,switch-x-sgmii : Boolean to indicate the Ethernet core is configured to

		  support both 1000BaseX and SGMII modes. If set, the phy-mode

		  should be set to match the mode selected on core reset (i.e.

		  by the basex_or_sgmii core input line).

- clocks	: AXI bus clock for the device. Refer to common clock bindings.

		  Used to calculate MDIO clock divisor. If not specified, it is

		  auto-detected from the CPU clock (but only on platforms where