Commit e6e4ec2f authored by Christoph Egger's avatar Christoph Egger Committed by David S. Miller
Browse files

net: Removing dead ARCH_PNX010X 



ARCH_PNX010X doesn't exist in Kconfig, therefore removing all
references for it from the source code/Kconfig.

Signed-off-by: default avatarChristoph Egger <siccegge@cs.fau.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 0bdc0d70

drivers/net/Kconfig

+2 −2
Original line number Diff line number Diff line
@@ -1464,7 +1464,7 @@ config FORCEDETH 
config CS89x0

	tristate "CS89x0 support"

	depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \

		|| ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS)

		|| ARCH_IXDP2X01 || MACH_MX31ADS)

	---help---

	  Support for CS89x0 chipset based Ethernet cards. If you have a

	  network (Ethernet) card of this type, say Y and read the
@@ -1478,7 +1478,7 @@ config CS89x0 
config CS89x0_NONISA_IRQ

	def_bool y

	depends on CS89x0 != n

	depends on MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS

	depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS



config TC35815

	tristate "TOSHIBA TC35815 Ethernet support"

drivers/net/cs89x0.c

+0 −45
Original line number Diff line number Diff line
@@ -176,12 +176,6 @@ static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0}; 
#elif defined(CONFIG_ARCH_IXDP2X01)

static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};

static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};

#elif defined(CONFIG_ARCH_PNX010X)

#include <mach/gpio.h>

#define CIRRUS_DEFAULT_BASE	IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000)	/* = Physical address 0x48200000 */

#define CIRRUS_DEFAULT_IRQ	VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */

static unsigned int netcard_portlist[] __used __initdata = {CIRRUS_DEFAULT_BASE, 0};

static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0};

#elif defined(CONFIG_MACH_MX31ADS)

#include <mach/board-mx31ads.h>

static unsigned int netcard_portlist[] __used __initdata = {
@@ -367,18 +361,6 @@ writeword(unsigned long base_addr, int portno, u16 value) 
{

	__raw_writel(value, base_addr + (portno << 1));

}

#elif defined(CONFIG_ARCH_PNX010X)

static u16

readword(unsigned long base_addr, int portno)

{

	return inw(base_addr + (portno << 1));

}



static void

writeword(unsigned long base_addr, int portno, u16 value)

{

	outw(value, base_addr + (portno << 1));

}

#else

static u16

readword(unsigned long base_addr, int portno)
@@ -541,30 +523,6 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) 
#endif

        }



#ifdef CONFIG_ARCH_PNX010X

	initialize_ebi();



	/* Map GPIO registers for the pins connected to the CS8900a. */

	if (map_cirrus_gpio() < 0)

		return -ENODEV;



	reset_cirrus();



	/* Map event-router registers. */

	if (map_event_router() < 0)

		return -ENODEV;



	enable_cirrus_irq();



	unmap_cirrus_gpio();

	unmap_event_router();



	dev->base_addr = ioaddr;



	for (i = 0 ; i < 3 ; i++)

		readreg(dev, 0);

#endif



	/* Grab the region so we can find another board if autoIRQ fails. */

	/* WTF is going on here? */

	if (!request_region(ioaddr & ~3, NETCARD_IO_EXTENT, DRV_NAME)) {
@@ -1343,9 +1301,6 @@ net_open(struct net_device *dev) 
	case A_CNF_MEDIA_10B_2: result = lp->adapter_cnf & A_CNF_10B_2; break;

        default: result = lp->adapter_cnf & (A_CNF_10B_T | A_CNF_AUI | A_CNF_10B_2);

        }

#ifdef CONFIG_ARCH_PNX010X

	result = A_CNF_10B_T;

#endif

        if (!result) {

                printk(KERN_ERR "%s: EEPROM is configured for unavailable media\n", dev->name);

release_dma: