Loading
soundwire: intel_auxdevice: add hybrid IDA-based device_number allocation
The IDA-based allocation is useful to simplify debug, but it was also introduced as a prerequisite to deal with the Intel Lunar Lake hardware programming sequences: the wake-ups have to be handled with a system-unique SDI address at the HDaudio controller level. At the time, the restriction introduced by the IDA to 8 devices total seemed perfectly fine, but recently hardware vendors created configurations with more than 8 devices. Add a new allocation strategy to allow for more than 8 devices using information on the type of devices, and only use the IDA-based allocation for devices capable of generating a wake. In theory the information on wake capabilities should come from firmware, but none of the existing ACPI tables provide it. The drivers set the 'wake_capable' property, but this cannot be used reliably: if the driver probe happens *after* the enumeration, then that property is not initialized yet. Trying to modify the device_number on-the-fly proved to be an impossible task generating race conditions left and right. The only reliable work-around to control the enumeration is to add a quirk table. It's ugly but until platform firmware improves, hopefully as a result of MIPI/SDCA stardization, we can expect that quirk table to grow for each new headset or microphone codec. Signed-off-by:Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: