Commit e5c956c4 authored by Nishanth Menon's avatar Nishanth Menon
Browse files

arm64: dts: ti: k3-*: Fix up node_name_chars_strict warnings 



Building with W=2 throws up a bunch of easy to fixup warnings..
node_name_chars_strict is one of them.. Knock those out.

Signed-off-by: default avatarNishanth Menon <nm@ti.com>
Reviewed-by: default avatarLokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: default avatarSuman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20200903130015.21361-9-nm@ti.com
parent 9a8ecd41

arch/arm64/boot/dts/ti/k3-am65-main.dtsi

+3 −3
Original line number Diff line number Diff line
@@ -305,7 +305,7 @@ 
		no-1-8-v;

	};



	scm_conf: scm_conf@100000 {

	scm_conf: scm-conf@100000 {

		compatible = "syscon", "simple-mfd";

		reg = <0 0x00100000 0 0x1c000>;

		#address-cells = <1>;
@@ -344,7 +344,7 @@ 
					<0x4090 0x3>; /* SERDES1 lane select */

		};



		dss_oldi_io_ctrl: dss_oldi_io_ctrl@41e0 {

		dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 {

			compatible = "syscon";

			reg = <0x0000041e0 0x14>;

		};
@@ -445,7 +445,7 @@ 
		ti,interrupt-ranges = <0 392 32>;

	};



	main_navss {

	main-navss {

		compatible = "simple-mfd";

		#address-cells = <2>;

		#size-cells = <2>;

arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi

+2 −2
Original line number Diff line number Diff line
@@ -6,7 +6,7 @@ 
 */



&cbass_mcu {

	mcu_conf: scm_conf@40f00000 {

	mcu_conf: scm-conf@40f00000 {

		compatible = "syscon", "simple-mfd";

		reg = <0x0 0x40f00000 0x0 0x20000>;

		#address-cells = <1>;
@@ -116,7 +116,7 @@ 
		};

	};



	mcu_navss {

	mcu-navss {

		compatible = "simple-mfd";

		#address-cells = <2>;

		#size-cells = <2>;

arch/arm64/boot/dts/ti/k3-am654-base-board.dts

+8 −8
Original line number Diff line number Diff line
@@ -29,7 +29,7 @@ 
		#address-cells = <2>;

		#size-cells = <2>;

		ranges;

		secure_ddr: secure_ddr@9e800000 {

		secure_ddr: secure-ddr@9e800000 {

			reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */

			alignment = <0x1000>;

			no-map;
@@ -70,14 +70,14 @@ 
		>;

	};



	push_button_pins_default: push_button__pins_default {

	push_button_pins_default: push-button-pins-default {

		pinctrl-single,pins = <

			AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */

			AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */

		>;

	};



	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins_default {

	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {

		pinctrl-single,pins = <

			AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */

			AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0)	 /* (U2) MCU_OSPI0_DQS */
@@ -93,13 +93,13 @@ 
		>;

	};



	wkup_pca554_default: wkup_pca554_default {

	wkup_pca554_default: wkup-pca554-default {

		pinctrl-single,pins = <

			AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */

		>;

	};



	mcu_cpsw_pins_default: mcu_cpsw_pins_default {

	mcu_cpsw_pins_default: mcu-cpsw-pins-default {

		pinctrl-single,pins = <

			AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */

			AM65X_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */
@@ -116,7 +116,7 @@ 
		>;

	};



	mcu_mdio_pins_default: mcu_mdio1_pins_default {

	mcu_mdio_pins_default: mcu-mdio1-pins-default {

		pinctrl-single,pins = <

			AM65X_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */

			AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
@@ -167,7 +167,7 @@ 
		>;

	};



	main_mmc1_pins_default: main_mmc1_pins_default {

	main_mmc1_pins_default: main-mmc1-pins-default {

		pinctrl-single,pins = <

			AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */

			AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */
@@ -180,7 +180,7 @@ 
		>;

	};



	usb1_pins_default: usb1_pins_default {

	usb1_pins_default: usb1-pins-default {

		pinctrl-single,pins = <

			AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */

		>;

arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi

+6 −6
Original line number Diff line number Diff line
@@ -2,13 +2,13 @@ 


#include <dt-bindings/thermal/thermal.h>



mpu0_thermal: mpu0_thermal {

mpu0_thermal: mpu0-thermal {

	polling-delay-passive = <250>; /* milliseconds */

	polling-delay = <500>; /* milliseconds */

	thermal-sensors = <&wkup_vtm0 0>;



	trips {

		mpu0_crit: mpu0_crit {

		mpu0_crit: mpu0-crit {

			temperature = <125000>; /* milliCelsius */

			hysteresis = <2000>; /* milliCelsius */

			type = "critical";
@@ -16,13 +16,13 @@ mpu0_thermal: mpu0_thermal { 
	};

};



mpu1_thermal: mpu1_thermal {

mpu1_thermal: mpu1-thermal {

	polling-delay-passive = <250>; /* milliseconds */

	polling-delay = <500>; /* milliseconds */

	thermal-sensors = <&wkup_vtm0 1>;



	trips {

		mpu1_crit: mpu1_crit {

		mpu1_crit: mpu1-crit {

			temperature = <125000>; /* milliCelsius */

			hysteresis = <2000>; /* milliCelsius */

			type = "critical";
@@ -30,13 +30,13 @@ mpu1_thermal: mpu1_thermal { 
	};

};



mcu_thermal: mcu_thermal {

mcu_thermal: mcu-thermal {

	polling-delay-passive = <250>; /* milliseconds */

	polling-delay = <500>; /* milliseconds */

	thermal-sensors = <&wkup_vtm0 2>;



	trips {

		mcu_crit: mcu_crit {

		mcu_crit: mcu-crit {

			temperature = <125000>; /* milliCelsius */

			hysteresis = <2000>; /* milliCelsius */

			type = "critical";

arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts

+9 −9
Original line number Diff line number Diff line
@@ -86,13 +86,13 @@ 
};



&main_pmx0 {

	sw10_button_pins_default: sw10_button_pins_default {

	sw10_button_pins_default: sw10-button-pins-default {

		pinctrl-single,pins = <

			J721E_IOPAD(0x0, PIN_INPUT, 7) /* (AC18) EXTINTn.GPIO0_0 */

		>;

	};



	main_mmc1_pins_default: main_mmc1_pins_default {

	main_mmc1_pins_default: main-mmc1-pins-default {

		pinctrl-single,pins = <

			J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */

			J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */
@@ -106,14 +106,14 @@ 
		>;

	};



	main_usbss0_pins_default: main_usbss0_pins_default {

	main_usbss0_pins_default: main-usbss0-pins-default {

		pinctrl-single,pins = <

			J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */

			J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */

		>;

	};



	main_usbss1_pins_default: main_usbss1_pins_default {

	main_usbss1_pins_default: main-usbss1-pins-default {

		pinctrl-single,pins = <

			J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */

		>;
@@ -153,7 +153,7 @@ 
		>;

	};



	mcasp10_pins_default: mcasp10_pins_default {

	mcasp10_pins_default: mcasp10-pins-default {

		pinctrl-single,pins = <

			J721E_IOPAD(0x158, PIN_OUTPUT_PULLDOWN, 12) /* (U23) RGMII5_TX_CTL.MCASP10_ACLKX */

			J721E_IOPAD(0x15c, PIN_OUTPUT_PULLDOWN, 12) /* (U26) RGMII5_RX_CTL.MCASP10_AFSX */
@@ -167,7 +167,7 @@ 
		>;

	};



	audi_ext_refclk2_pins_default: audi_ext_refclk2_pins_default {

	audi_ext_refclk2_pins_default: audi-ext-refclk2-pins-default {

		pinctrl-single,pins = <

			J721E_IOPAD(0x1a4, PIN_OUTPUT, 3) /* (W26) RGMII6_RXC.AUDIO_EXT_REFCLK2 */

		>;
@@ -175,7 +175,7 @@ 
};



&wkup_pmx0 {

	sw11_button_pins_default: sw11_button_pins_default {

	sw11_button_pins_default: sw11-button-pins-default {

		pinctrl-single,pins = <

			J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */

		>;
@@ -194,7 +194,7 @@ 
		>;

	};



	mcu_cpsw_pins_default: mcu_cpsw_pins_default {

	mcu_cpsw_pins_default: mcu-cpsw-pins-default {

		pinctrl-single,pins = <

			J721E_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */

			J721E_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
@@ -211,7 +211,7 @@ 
		>;

	};



	mcu_mdio_pins_default: mcu_mdio1_pins_default {

	mcu_mdio_pins_default: mcu-mdio1-pins-default {

		pinctrl-single,pins = <

			J721E_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* MCU_MDIO0_MDC */

			J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_MDIO0_MDIO */