Unverified Commit e5aced3d authored by openeuler-ci-bot's avatar openeuler-ci-bot Committed by Gitee
Browse files

!9162 [OLK-6.6] efi: cper: Add Zhaoxin/Centaur ZDI/ZPI error decode 

Merge Pull Request from: @leoliu-oc 
 
ZPI is the interconnection interface between sockets, ZDI is the interconnection interface between dies.

When either zdi or zpi occurs error, it will trigger smi interrput, the smi handler will read error information from the zdi/zpi configuration space, fill it in the cper structure asscoiated with error and produce a sci or nmi interrput to notify the OS ,the OS driver will decode the cper
structure to help user to annalyze the error.

Because UEFI spec does not define the section type of ZDI/ZPI error. Zhaoxin defines ZDI/ZPI errors according to the error format defined by the Generic Processor Error Section type.When the error occurs, The BIOS will fill error information in the data structure corresponding to the Generic Processor Error Section type in the smi handler.However,the error information printed by default apei driver is not easy to read.

The software has added some printed logs to make the ZDI/ZPI error information on the Zhaoxin/Centaur cpu vendor easier to read.

### Issue
https://gitee.com/openeuler/kernel/issues/IA6FZQ

### Default config Change
N/A

### Test
Pass. 
 
Link:https://gitee.com/openeuler/kernel/pulls/9162

 

Reviewed-by: default avatarJason Zeng <jason.zeng@intel.com>
Signed-off-by: default avatarZhang Peng <zhangpeng362@huawei.com>
parents 59d2afe4 b1d55b3e

drivers/firmware/efi/cper.c

+53 −0
Original line number Diff line number Diff line
@@ -141,6 +141,57 @@ static const char * const proc_flag_strs[] = { 
	"corrected",

};



static const char * const zdi_zpi_err_type_strs[] = {

	"No Error",

	"Training Error Status (PHY)",

	"Data Link Protocol Error Status (DLL)",

	"Surprise Down Error Status",

	"Flow Control Protocol Error Status (TL)",

	"Receiver Overflow Status (TL)",

	"Receiver Error Status (PHY)",

	"Bad TLP Status (DLL)",

	"Bad Data Link Layer Packet (DLLP) Status (DLL)",

	"REPLAY_NUM Rollover Status (DLL)",

	"Replay Timer Timeout Status (DLL)",

	"X16 Link Width Unreliable Status",

	"ZPI X8 Link Width Unreliable Status",

	"ZPI X4 Link Width Unreliable Status",

	"ZPI X2 Link Width Unreliable Status",

	"ZPI Gen3 Link Speed Unreliable Status",

	"ZPI Gen2 Link Speed Unreliable Status",

	"ZDI Gen3 Link Speed Unreliable Status",

	"ZDI Gen4 Link Speed Unreliable Status",

};



const char *cper_zdi_zpi_err_type_str(unsigned long etype)

{

	return etype < ARRAY_SIZE(zdi_zpi_err_type_strs) ?

		zdi_zpi_err_type_strs[etype] : "unknown error";

}

EXPORT_SYMBOL_GPL(cper_zdi_zpi_err_type_str);



static void cper_print_proc_generic_zdi_zpi(const char *pfx,

					    const struct cper_sec_proc_generic *zdi_zpi)

{

#if IS_ENABLED(CONFIG_X86)

	if (boot_cpu_data.x86_vendor == X86_VENDOR_ZHAOXIN ||

	    boot_cpu_data.x86_vendor == X86_VENDOR_CENTAUR) {

		if ((zdi_zpi->requestor_id & 0xff) == 7) {

			pr_info("%s general processor error(zpi error)\n", pfx);

		} else if ((zdi_zpi->requestor_id & 0xff) == 6) {

			pr_info("%s general processor error(zdi error)\n", pfx);

		} else {

			pr_info("%s general processor error(unknown error)\n", pfx);

			return;

		}

		pr_info("%s bus number %llx device number %llx function number 0\n", pfx,

			((zdi_zpi->requestor_id)>>8) & 0xff, zdi_zpi->requestor_id & 0xff);

		pr_info("%s apic id %lld error_type: %s\n", pfx, zdi_zpi->proc_id,

			cper_zdi_zpi_err_type_str(zdi_zpi->responder_id));

	}

#endif

}



static void cper_print_proc_generic(const char *pfx,

				    const struct cper_sec_proc_generic *proc)

{
@@ -184,6 +235,8 @@ static void cper_print_proc_generic(const char *pfx, 
		       pfx, proc->responder_id);

	if (proc->validation_bits & CPER_PROC_VALID_IP)

		printk("%s""IP: 0x%016llx\n", pfx, proc->ip);



	cper_print_proc_generic_zdi_zpi(pfx, proc);

}



static const char * const mem_err_type_strs[] = {

include/linux/cper.h

+2 −0
Original line number Diff line number Diff line
@@ -578,4 +578,6 @@ void cper_estatus_print(const char *pfx, 
int cper_estatus_check_header(const struct acpi_hest_generic_status *estatus);

int cper_estatus_check(const struct acpi_hest_generic_status *estatus);



const char *cper_zdi_zpi_err_type_str(unsigned long etype);



#endif