Commit e25ac142 authored by Jean-Christophe PLAGNIOL-VILLARD's avatar Jean-Christophe PLAGNIOL-VILLARD Committed by Nicolas Ferre
Browse files

ARM: at91: drop rm9200dk board support 



This board is impossible to found anymore.

Signed-off-by: default avatarJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
parent b3f442b0

arch/arm/configs/at91rm9200_defconfig

+0 −1
Original line number Diff line number Diff line
@@ -18,7 +18,6 @@ CONFIG_MODULE_SRCVERSION_ALL=y 
CONFIG_ARCH_AT91=y

CONFIG_ARCH_AT91RM9200=y

CONFIG_MACH_ONEARM=y

CONFIG_ARCH_AT91RM9200DK=y

CONFIG_MACH_AT91RM9200EK=y

CONFIG_MACH_CSB337=y

CONFIG_MACH_CSB637=y

arch/arm/mach-at91/Kconfig.non_dt

+0 −7
Original line number Diff line number Diff line
@@ -62,13 +62,6 @@ config MACH_ONEARM 
	  Select this if you are using Ajeco's 1ARM Single Board Computer.

	  <http://www.ajeco.fi/>



config ARCH_AT91RM9200DK

	bool "Atmel AT91RM9200-DK Development board"

	select HAVE_AT91_DATAFLASH_CARD

	help

	  Select this if you are using Atmel's AT91RM9200-DK Development board.

	  (Discontinued)



config MACH_AT91RM9200EK

	bool "Atmel AT91RM9200-EK Evaluation Kit"

	select HAVE_AT91_DATAFLASH_CARD

arch/arm/mach-at91/Makefile

+0 −1
Original line number Diff line number Diff line
@@ -34,7 +34,6 @@ obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o 


# AT91RM9200 board-specific support

obj-$(CONFIG_MACH_ONEARM)	+= board-1arm.o

obj-$(CONFIG_ARCH_AT91RM9200DK)	+= board-rm9200dk.o

obj-$(CONFIG_MACH_AT91RM9200EK)	+= board-rm9200ek.o

obj-$(CONFIG_MACH_CSB337)	+= board-csb337.o

obj-$(CONFIG_MACH_CSB637)	+= board-csb637.o

arch/arm/mach-at91/board-rm9200dk.c

deleted100644 → 0
+0 −228
Original line number Diff line number Diff line 
/*

 * linux/arch/arm/mach-at91/board-rm9200dk.c

 *

 *  Copyright (C) 2005 SAN People

 *

 *  Epson S1D framebuffer glue code is:

 *     Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; either version 2 of the License, or

 * (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 * You should have received a copy of the GNU General Public License

 * along with this program; if not, write to the Free Software

 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

 */



#include <linux/types.h>

#include <linux/gpio.h>

#include <linux/init.h>

#include <linux/mm.h>

#include <linux/module.h>

#include <linux/platform_device.h>

#include <linux/spi/spi.h>

#include <linux/mtd/physmap.h>



#include <asm/setup.h>

#include <asm/mach-types.h>

#include <asm/irq.h>



#include <asm/mach/arch.h>

#include <asm/mach/map.h>

#include <asm/mach/irq.h>



#include <mach/hardware.h>

#include <mach/at91rm9200_mc.h>

#include <mach/at91_ramc.h>



#include "at91_aic.h"

#include "board.h"

#include "generic.h"





static void __init dk_init_early(void)

{

	/* Initialize processor: 18.432 MHz crystal */

	at91_initialize(18432000);

}



static struct macb_platform_data __initdata dk_eth_data = {

	.phy_irq_pin	= AT91_PIN_PC4,

	.is_rmii	= 1,

};



static struct at91_usbh_data __initdata dk_usbh_data = {

	.ports		= 2,

	.vbus_pin	= {-EINVAL, -EINVAL},

	.overcurrent_pin= {-EINVAL, -EINVAL},

};



static struct at91_udc_data __initdata dk_udc_data = {

	.vbus_pin	= AT91_PIN_PD4,

	.pullup_pin	= AT91_PIN_PD5,

};



static struct at91_cf_data __initdata dk_cf_data = {

	.irq_pin	= -EINVAL,

	.det_pin	= AT91_PIN_PB0,

	.vcc_pin	= -EINVAL,

	.rst_pin	= AT91_PIN_PC5,

};



#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD

static struct mci_platform_data __initdata dk_mci0_data = {

	.slot[0] = {

		.bus_width	= 4,

		.detect_pin	= -EINVAL,

		.wp_pin		= -EINVAL,

	},

};

#endif



static struct spi_board_info dk_spi_devices[] = {

	{	/* DataFlash chip */

		.modalias	= "mtd_dataflash",

		.chip_select	= 0,

		.max_speed_hz	= 15 * 1000 * 1000,

	},

	{	/* UR6HCPS2-SP40 PS2-to-SPI adapter */

		.modalias	= "ur6hcps2",

		.chip_select	= 1,

		.max_speed_hz	= 250 *  1000,

	},

	{	/* TLV1504 ADC, 4 channels, 10 bits; one is a temp sensor */

		.modalias	= "tlv1504",

		.chip_select	= 2,

		.max_speed_hz	= 20 * 1000 * 1000,

	},

#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD

	{	/* DataFlash card */

		.modalias	= "mtd_dataflash",

		.chip_select	= 3,

		.max_speed_hz	= 15 * 1000 * 1000,

	}

#endif

};



static struct i2c_board_info __initdata dk_i2c_devices[] = {

	{

		I2C_BOARD_INFO("ics1523", 0x26),

	},

	{

		I2C_BOARD_INFO("x9429", 0x28),

	},

	{

		I2C_BOARD_INFO("24c1024", 0x50),

	}

};



static struct mtd_partition __initdata dk_nand_partition[] = {

	{

		.name	= "NAND Partition 1",

		.offset	= 0,

		.size	= MTDPART_SIZ_FULL,

	},

};



static struct atmel_nand_data __initdata dk_nand_data = {

	.ale		= 22,

	.cle		= 21,

	.det_pin	= AT91_PIN_PB1,

	.rdy_pin	= AT91_PIN_PC2,

	.enable_pin	= -EINVAL,

	.ecc_mode	= NAND_ECC_SOFT,

	.on_flash_bbt	= 1,

	.parts		= dk_nand_partition,

	.num_parts	= ARRAY_SIZE(dk_nand_partition),

};



#define DK_FLASH_BASE	AT91_CHIPSELECT_0

#define DK_FLASH_SIZE	SZ_2M



static struct physmap_flash_data dk_flash_data = {

	.width		= 2,

};



static struct resource dk_flash_resource = {

	.start		= DK_FLASH_BASE,

	.end		= DK_FLASH_BASE + DK_FLASH_SIZE - 1,

	.flags		= IORESOURCE_MEM,

};



static struct platform_device dk_flash = {

	.name		= "physmap-flash",

	.id		= 0,

	.dev		= {

				.platform_data	= &dk_flash_data,

			},

	.resource	= &dk_flash_resource,

	.num_resources	= 1,

};



static struct gpio_led dk_leds[] = {

	{

		.name			= "led0",

		.gpio			= AT91_PIN_PB2,

		.active_low		= 1,

		.default_trigger	= "heartbeat",

	}

};



static void __init dk_board_init(void)

{

	/* Serial */

	/* DBGU on ttyS0. (Rx & Tx only) */

	at91_register_uart(0, 0, 0);



	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */

	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS

			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD

			   | ATMEL_UART_RI);

	at91_add_device_serial();

	/* Ethernet */

	at91_add_device_eth(&dk_eth_data);

	/* USB Host */

	at91_add_device_usbh(&dk_usbh_data);

	/* USB Device */

	at91_add_device_udc(&dk_udc_data);

	at91_set_multi_drive(dk_udc_data.pullup_pin, 1);	/* pullup_pin is connected to reset */

	/* Compact Flash */

	at91_add_device_cf(&dk_cf_data);

	/* I2C */

	at91_add_device_i2c(dk_i2c_devices, ARRAY_SIZE(dk_i2c_devices));

	/* SPI */

	at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices));

#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD

	/* DataFlash card */

	at91_set_gpio_output(AT91_PIN_PB7, 0);

#else

	/* MMC */

	at91_set_gpio_output(AT91_PIN_PB7, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */

	at91_add_device_mci(0, &dk_mci0_data);

#endif

	/* NAND */

	at91_add_device_nand(&dk_nand_data);

	/* NOR Flash */

	platform_device_register(&dk_flash);

	/* LEDs */

	at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));

	/* VGA */

//	dk_add_device_video();

}



MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")

	/* Maintainer: SAN People/Atmel */

	.init_time	= at91rm9200_timer_init,

	.map_io		= at91_map_io,

	.handle_irq	= at91_aic_handle_irq,

	.init_early	= dk_init_early,

	.init_irq	= at91_init_irq_default,

	.init_machine	= dk_board_init,

MACHINE_END