Commit ddb74e98 authored by Ashish Chavan's avatar Ashish Chavan Committed by Sebastian Reichel
Browse files

power: supply: ab8500_charger: Fix typos in commit messages 



Trivial fix to spelling mistake in commit messages.

Signed-off-by: default avatarAshish Chavan <ashish.gschavan@gmail.com>
Signed-off-by: default avatarSebastian Reichel <sebastian.reichel@collabora.com>
parent 241eaabc

drivers/power/supply/ab8500_charger.c

+19 −16
Original line number Diff line number Diff line
@@ -404,7 +404,7 @@ static void ab8500_enable_disable_sw_fallback(struct ab8500_charger *di, 
}



/**

 * ab8500_power_supply_changed - a wrapper with local extentions for

 * ab8500_power_supply_changed - a wrapper with local extensions for

 * power_supply_changed

 * @di:	  pointer to the ab8500_charger structure

 * @psy:  pointer to power_supply_that have changed.
@@ -683,7 +683,7 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di, 
	/*

	 * Platform only supports USB 2.0.

	 * This means that charging current from USB source

	 * is maximum 500 mA. Every occurence of USB_STAT_*_HOST_*

	 * is maximum 500 mA. Every occurrence of USB_STAT_*_HOST_*

	 * should set USB_CH_IP_CUR_LVL_0P5.

	 */
@@ -1383,9 +1383,9 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger, 
		 * This will turn off charging for a short while.

		 * It can be avoided by having the supply on when

		 * there is a charger enabled. Normally the VDD ADC supply

		 * is enabled everytime a GPADC conversion is triggered. We will

		 * force it to be enabled from this driver to have

		 * the GPADC module independant of the AB8500 chargers

		 * is enabled every time a GPADC conversion is triggered.

		 * We will force it to be enabled from this driver to have

		 * the GPADC module independent of the AB8500 chargers

		 */

		if (!di->vddadc_en_ac) {

			ret = regulator_enable(di->regu);
@@ -1455,7 +1455,7 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger, 
		if (is_ab8500_1p1_or_earlier(di->parent)) {

			/*

			 * For ABB revision 1.0 and 1.1 there is a bug in the

			 * watchdog logic. That means we have to continously

			 * watchdog logic. That means we have to continuously

			 * kick the charger watchdog even when no charger is

			 * connected. This is only valid once the AC charger

			 * has been enabled. This is a bug that is not handled
@@ -1556,9 +1556,9 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger, 
		 * This will turn off charging for a short while.

		 * It can be avoided by having the supply on when

		 * there is a charger enabled. Normally the VDD ADC supply

		 * is enabled everytime a GPADC conversion is triggered. We will

		 * force it to be enabled from this driver to have

		 * the GPADC module independant of the AB8500 chargers

		 * is enabled every time a GPADC conversion is triggered.

		 * We will force it to be enabled from this driver to have

		 * the GPADC module independent of the AB8500 chargers

		 */

		if (!di->vddadc_en_usb) {

			ret = regulator_enable(di->regu);
@@ -1582,7 +1582,10 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger, 
			return -ENXIO;

		}



		/* ChVoltLevel: max voltage upto which battery can be charged */

		/*

		 * ChVoltLevel: max voltage up to which battery can be

		 * charged

		 */

		ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,

			AB8500_CH_VOLT_LVL_REG, (u8) volt_index);

		if (ret) {
@@ -2014,7 +2017,7 @@ static void ab8500_charger_check_hw_failure_work(struct work_struct *work) 
 * Work queue function for kicking the charger watchdog.

 *

 * For ABB revision 1.0 and 1.1 there is a bug in the watchdog

 * logic. That means we have to continously kick the charger

 * logic. That means we have to continuously kick the charger

 * watchdog even when no charger is connected. This is only

 * valid once the AC charger has been enabled. This is

 * a bug that is not handled by the algorithm and the
@@ -2262,7 +2265,7 @@ static void ab8500_charger_usb_link_status_work(struct work_struct *work) 
	 * Some chargers that breaks the USB spec is

	 * identified as invalid by AB8500 and it refuse

	 * to start the charging process. but by jumping

	 * thru a few hoops it can be forced to start.

	 * through a few hoops it can be forced to start.

	 */

	if (is_ab8500(di->parent))

		ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
@@ -3214,7 +3217,7 @@ static int ab8500_charger_resume(struct platform_device *pdev) 


	/*

	 * For ABB revision 1.0 and 1.1 there is a bug in the watchdog

	 * logic. That means we have to continously kick the charger

	 * logic. That means we have to continuously kick the charger

	 * watchdog even when no charger is connected. This is only

	 * valid once the AC charger has been enabled. This is

	 * a bug that is not handled by the algorithm and the
@@ -3483,7 +3486,7 @@ static int ab8500_charger_probe(struct platform_device *pdev) 


	/*

	 * For ABB revision 1.0 and 1.1 there is a bug in the watchdog

	 * logic. That means we have to continously kick the charger

	 * logic. That means we have to continuously kick the charger

	 * watchdog even when no charger is connected. This is only

	 * valid once the AC charger has been enabled. This is

	 * a bug that is not handled by the algorithm and the