Commit dd720c7e authored by Christoph Niedermaier's avatar Christoph Niedermaier Committed by Shawn Guo
Browse files

ARM: dts: imx6q-dhcom: Add interrupt and compatible to the ethernet PHY 



Enable the interrupt mode for the ethernet PHY by adding the
necessary property and a separate pinctrl for the PHY. Also
add the compatible property for it.

Signed-off-by: default avatarChristoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: default avatarMarek Vasut <marex@denx.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 2af8a617

arch/arm/boot/dts/imx6q-dhcom-som.dtsi

+13 −3
Original line number Diff line number Diff line
@@ -124,8 +124,13 @@ 
		#size-cells = <0>;



		ethphy0: ethernet-phy@0 {	/* SMSC LAN8710Ai */

			reg = <0>;

			compatible = "ethernet-phy-ieee802.3-c22";

			interrupt-parent = <&gpio4>;

			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;

			max-speed = <100>;

			pinctrl-0 = <&pinctrl_ethphy0>;

			pinctrl-names = "default";

			reg = <0>;

			reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;

			reset-assert-us = <1000>;

			reset-deassert-us = <1000>;
@@ -299,8 +304,6 @@ 
			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0

			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0

			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8

			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x000b0

			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x000b1

		>;

	};
@@ -310,6 +313,13 @@ 
		>;

	};



	pinctrl_ethphy0: ethphy0-grp {

		fsl,pins = <

			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0xb0 /* Reset */

			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0xb1 /* Int */

		>;

	};



	pinctrl_flexcan1: flexcan1-grp {

		fsl,pins = <

			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0