Commit d91ea1e0 authored by Rajendra Nayak's avatar Rajendra Nayak Committed by Bjorn Andersson
Browse files

arm64: dts: sc7180: Add OPP table for all qup devices 



qup has a requirement to vote on the performance state of the CX domain
in sc7180 devices. Add OPP tables for these and also add power-domains
property for all qup instances for uart and spi.
i2c does not support scaling and uses a fixed clock.

Reviewed-by: default avatarMatthias Kaehlcke <mka@chromium.org>
Signed-off-by: default avatarRajendra Nayak <rnayak@codeaurora.org>
Link: https://lore.kernel.org/r/1593506712-24557-3-git-send-email-rnayak@codeaurora.org


Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent 13cadb34

arch/arm64/boot/dts/qcom/sc7180.dtsi

+59 −0
Original line number Diff line number Diff line
@@ -697,6 +697,25 @@ 
			status = "disabled";

		};



		qup_opp_table: qup-opp-table {

			compatible = "operating-points-v2";



			opp-75000000 {

				opp-hz = /bits/ 64 <75000000>;

				required-opps = <&rpmhpd_opp_low_svs>;

			};



			opp-100000000 {

				opp-hz = /bits/ 64 <100000000>;

				required-opps = <&rpmhpd_opp_svs>;

			};



			opp-128000000 {

				opp-hz = /bits/ 64 <128000000>;

				required-opps = <&rpmhpd_opp_nom>;

			};

		};



		qupv3_id_0: geniqup@8c0000 {

			compatible = "qcom,geni-se-qup";

			reg = <0 0x008c0000 0 0x6000>;
@@ -739,6 +758,8 @@ 
				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;

				#address-cells = <1>;

				#size-cells = <0>;

				power-domains = <&rpmhpd SC7180_CX>;

				operating-points-v2 = <&qup_opp_table>;

				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,

						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;

				interconnect-names = "qup-core", "qup-config";
@@ -753,6 +774,8 @@ 
				pinctrl-names = "default";

				pinctrl-0 = <&qup_uart0_default>;

				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;

				power-domains = <&rpmhpd SC7180_CX>;

				operating-points-v2 = <&qup_opp_table>;

				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,

						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;

				interconnect-names = "qup-core", "qup-config";
@@ -787,6 +810,8 @@ 
				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;

				#address-cells = <1>;

				#size-cells = <0>;

				power-domains = <&rpmhpd SC7180_CX>;

				operating-points-v2 = <&qup_opp_table>;

				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,

						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;

				interconnect-names = "qup-core", "qup-config";
@@ -801,6 +826,8 @@ 
				pinctrl-names = "default";

				pinctrl-0 = <&qup_uart1_default>;

				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;

				power-domains = <&rpmhpd SC7180_CX>;

				operating-points-v2 = <&qup_opp_table>;

				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,

						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;

				interconnect-names = "qup-core", "qup-config";
@@ -833,6 +860,8 @@ 
				pinctrl-names = "default";

				pinctrl-0 = <&qup_uart2_default>;

				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;

				power-domains = <&rpmhpd SC7180_CX>;

				operating-points-v2 = <&qup_opp_table>;

				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,

						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;

				interconnect-names = "qup-core", "qup-config";
@@ -867,6 +896,8 @@ 
				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;

				#address-cells = <1>;

				#size-cells = <0>;

				power-domains = <&rpmhpd SC7180_CX>;

				operating-points-v2 = <&qup_opp_table>;

				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,

						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;

				interconnect-names = "qup-core", "qup-config";
@@ -881,6 +912,8 @@ 
				pinctrl-names = "default";

				pinctrl-0 = <&qup_uart3_default>;

				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;

				power-domains = <&rpmhpd SC7180_CX>;

				operating-points-v2 = <&qup_opp_table>;

				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,

						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;

				interconnect-names = "qup-core", "qup-config";
@@ -913,6 +946,8 @@ 
				pinctrl-names = "default";

				pinctrl-0 = <&qup_uart4_default>;

				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;

				power-domains = <&rpmhpd SC7180_CX>;

				operating-points-v2 = <&qup_opp_table>;

				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,

						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;

				interconnect-names = "qup-core", "qup-config";
@@ -947,6 +982,8 @@ 
				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;

				#address-cells = <1>;

				#size-cells = <0>;

				power-domains = <&rpmhpd SC7180_CX>;

				operating-points-v2 = <&qup_opp_table>;

				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,

						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;

				interconnect-names = "qup-core", "qup-config";
@@ -961,6 +998,8 @@ 
				pinctrl-names = "default";

				pinctrl-0 = <&qup_uart5_default>;

				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;

				power-domains = <&rpmhpd SC7180_CX>;

				operating-points-v2 = <&qup_opp_table>;

				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,

						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;

				interconnect-names = "qup-core", "qup-config";
@@ -1010,6 +1049,8 @@ 
				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;

				#address-cells = <1>;

				#size-cells = <0>;

				power-domains = <&rpmhpd SC7180_CX>;

				operating-points-v2 = <&qup_opp_table>;

				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,

						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;

				interconnect-names = "qup-core", "qup-config";
@@ -1024,6 +1065,8 @@ 
				pinctrl-names = "default";

				pinctrl-0 = <&qup_uart6_default>;

				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;

				power-domains = <&rpmhpd SC7180_CX>;

				operating-points-v2 = <&qup_opp_table>;

				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,

						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;

				interconnect-names = "qup-core", "qup-config";
@@ -1056,6 +1099,8 @@ 
				pinctrl-names = "default";

				pinctrl-0 = <&qup_uart7_default>;

				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;

				power-domains = <&rpmhpd SC7180_CX>;

				operating-points-v2 = <&qup_opp_table>;

				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,

						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;

				interconnect-names = "qup-core", "qup-config";
@@ -1090,6 +1135,8 @@ 
				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;

				#address-cells = <1>;

				#size-cells = <0>;

				power-domains = <&rpmhpd SC7180_CX>;

				operating-points-v2 = <&qup_opp_table>;

				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,

						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;

				interconnect-names = "qup-core", "qup-config";
@@ -1104,6 +1151,8 @@ 
				pinctrl-names = "default";

				pinctrl-0 = <&qup_uart8_default>;

				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;

				power-domains = <&rpmhpd SC7180_CX>;

				operating-points-v2 = <&qup_opp_table>;

				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,

						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;

				interconnect-names = "qup-core", "qup-config";
@@ -1136,6 +1185,8 @@ 
				pinctrl-names = "default";

				pinctrl-0 = <&qup_uart9_default>;

				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;

				power-domains = <&rpmhpd SC7180_CX>;

				operating-points-v2 = <&qup_opp_table>;

				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,

						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;

				interconnect-names = "qup-core", "qup-config";
@@ -1170,6 +1221,8 @@ 
				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;

				#address-cells = <1>;

				#size-cells = <0>;

				power-domains = <&rpmhpd SC7180_CX>;

				operating-points-v2 = <&qup_opp_table>;

				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,

						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;

				interconnect-names = "qup-core", "qup-config";
@@ -1184,6 +1237,8 @@ 
				pinctrl-names = "default";

				pinctrl-0 = <&qup_uart10_default>;

				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;

				power-domains = <&rpmhpd SC7180_CX>;

				operating-points-v2 = <&qup_opp_table>;

				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,

						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;

				interconnect-names = "qup-core", "qup-config";
@@ -1218,6 +1273,8 @@ 
				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;

				#address-cells = <1>;

				#size-cells = <0>;

				power-domains = <&rpmhpd SC7180_CX>;

				operating-points-v2 = <&qup_opp_table>;

				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,

						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;

				interconnect-names = "qup-core", "qup-config";
@@ -1232,6 +1289,8 @@ 
				pinctrl-names = "default";

				pinctrl-0 = <&qup_uart11_default>;

				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;

				power-domains = <&rpmhpd SC7180_CX>;

				operating-points-v2 = <&qup_opp_table>;

				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,

						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;

				interconnect-names = "qup-core", "qup-config";