Loading drivers/net/mdio.c +17 −0 Original line number Diff line number Diff line Loading @@ -296,6 +296,23 @@ void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio, ecmd->duplex = (reg & MDIO_CTRL1_FULLDPLX || ecmd->speed == SPEED_10000); } /* 10GBASE-T MDI/MDI-X */ if (ecmd->port == PORT_TP && ecmd->speed == SPEED_10000) { switch (mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_SWAPPOL)) { case MDIO_PMA_10GBT_SWAPPOL_ABNX | MDIO_PMA_10GBT_SWAPPOL_CDNX: ecmd->eth_tp_mdix = ETH_TP_MDI; break; case 0: ecmd->eth_tp_mdix = ETH_TP_MDI_X; break; default: /* It's complicated... */ ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID; break; } } } EXPORT_SYMBOL(mdio45_ethtool_gset_npage); Loading include/linux/mdio.h +9 −0 Original line number Diff line number Diff line Loading @@ -45,6 +45,7 @@ #define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */ /* Media-dependent registers. */ #define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */ #define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */ #define MDIO_PMA_10GBT_SNR 133 /* 10GBASE-T SNR margin, lane A. * Lanes B-D are numbered 134-136. */ Loading Loading @@ -195,6 +196,14 @@ #define MDIO_PHYXS_LNSTAT_SYNC3 0x0008 #define MDIO_PHYXS_LNSTAT_ALIGN 0x1000 /* PMA 10GBASE-T pair swap & polarity */ #define MDIO_PMA_10GBT_SWAPPOL_ABNX 0x0001 /* Pair A/B uncrossed */ #define MDIO_PMA_10GBT_SWAPPOL_CDNX 0x0002 /* Pair C/D uncrossed */ #define MDIO_PMA_10GBT_SWAPPOL_AREV 0x0100 /* Pair A polarity reversed */ #define MDIO_PMA_10GBT_SWAPPOL_BREV 0x0200 /* Pair B polarity reversed */ #define MDIO_PMA_10GBT_SWAPPOL_CREV 0x0400 /* Pair C polarity reversed */ #define MDIO_PMA_10GBT_SWAPPOL_DREV 0x0800 /* Pair D polarity reversed */ /* PMA 10GBASE-T TX power register. */ #define MDIO_PMA_10GBT_TXPWR_SHORT 0x0001 /* Short-reach mode */ Loading Loading
drivers/net/mdio.c +17 −0 Original line number Diff line number Diff line Loading @@ -296,6 +296,23 @@ void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio, ecmd->duplex = (reg & MDIO_CTRL1_FULLDPLX || ecmd->speed == SPEED_10000); } /* 10GBASE-T MDI/MDI-X */ if (ecmd->port == PORT_TP && ecmd->speed == SPEED_10000) { switch (mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_SWAPPOL)) { case MDIO_PMA_10GBT_SWAPPOL_ABNX | MDIO_PMA_10GBT_SWAPPOL_CDNX: ecmd->eth_tp_mdix = ETH_TP_MDI; break; case 0: ecmd->eth_tp_mdix = ETH_TP_MDI_X; break; default: /* It's complicated... */ ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID; break; } } } EXPORT_SYMBOL(mdio45_ethtool_gset_npage); Loading
include/linux/mdio.h +9 −0 Original line number Diff line number Diff line Loading @@ -45,6 +45,7 @@ #define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */ /* Media-dependent registers. */ #define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */ #define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */ #define MDIO_PMA_10GBT_SNR 133 /* 10GBASE-T SNR margin, lane A. * Lanes B-D are numbered 134-136. */ Loading Loading @@ -195,6 +196,14 @@ #define MDIO_PHYXS_LNSTAT_SYNC3 0x0008 #define MDIO_PHYXS_LNSTAT_ALIGN 0x1000 /* PMA 10GBASE-T pair swap & polarity */ #define MDIO_PMA_10GBT_SWAPPOL_ABNX 0x0001 /* Pair A/B uncrossed */ #define MDIO_PMA_10GBT_SWAPPOL_CDNX 0x0002 /* Pair C/D uncrossed */ #define MDIO_PMA_10GBT_SWAPPOL_AREV 0x0100 /* Pair A polarity reversed */ #define MDIO_PMA_10GBT_SWAPPOL_BREV 0x0200 /* Pair B polarity reversed */ #define MDIO_PMA_10GBT_SWAPPOL_CREV 0x0400 /* Pair C polarity reversed */ #define MDIO_PMA_10GBT_SWAPPOL_DREV 0x0800 /* Pair D polarity reversed */ /* PMA 10GBASE-T TX power register. */ #define MDIO_PMA_10GBT_TXPWR_SHORT 0x0001 /* Short-reach mode */ Loading