Commit cf065a7d authored by Randy Dunlap's avatar Randy Dunlap Committed by Martin K. Petersen
Browse files

scsi: Documentation: Correct spelling 

Correct spelling problems for Documentation/scsi/ as reported by codespell.

Link: https://lore.kernel.org/r/20230129231053.20863-8-rdunlap@infradead.org


Signed-off-by: default avatarRandy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 685d5ef4

Documentation/scsi/ncr53c8xx.rst

+2 −2
Original line number Diff line number Diff line
@@ -906,7 +906,7 @@ burst:#x burst enabled (1<<#x burst transfers max) 
        led:0      disable LED support

        =====      ===================



  Donnot enable LED support if your scsi board does not use SDMS BIOS.

  Do not enable LED support if your scsi board does not use SDMS BIOS.

  (See 'Configuration parameters')



10.2.13 Max wide
@@ -1222,7 +1222,7 @@ Unfortunately, the following common SCSI BUS problems are not detected: 
- Bad quality terminators.



On the other hand, either bad cabling, broken devices, not conformant

devices, ... may cause a SCSI signal to be wrong when te driver reads it.

devices, ... may cause a SCSI signal to be wrong when the driver reads it.



10.7 IMMEDIATE ARBITRATION boot option

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Documentation/scsi/sym53c8xx_2.rst

+1 −1
Original line number Diff line number Diff line
@@ -703,7 +703,7 @@ Unfortunately, the following common SCSI BUS problems are not detected: 
- Bad quality terminators.



On the other hand, either bad cabling, broken devices, not conformant

devices, ... may cause a SCSI signal to be wrong when te driver reads it.

devices, ... may cause a SCSI signal to be wrong when the driver reads it.



15. SCSI problem troubleshooting

================================

Documentation/scsi/tcm_qla2xxx.rst

+1 −1
Original line number Diff line number Diff line
@@ -6,7 +6,7 @@ tcm_qla2xxx Driver Notes 


tcm_qla2xxx jam_host attribute

------------------------------

There is now a new module endpoint atribute called jam_host

There is now a new module endpoint attribute called jam_host

attribute::



	jam_host: boolean=0/1

Documentation/scsi/ufs.rst

+1 −1
Original line number Diff line number Diff line
@@ -206,5 +206,5 @@ Device-Specific Data property named "ref-clk-freq". In both ways the value 
is interpreted as frequency in Hz and must match one of the values given in

the UFS specification. UFS subsystem will attempt to read the value when

executing common controller initialization. If the value is available, UFS

subsytem will ensure the bRefClkFreq attribute of the UFS storage device is

subsystem will ensure the bRefClkFreq attribute of the UFS storage device is

set accordingly and will modify it if there is a mismatch.