Commit ccd36795 authored by Krzysztof Wilczyński's avatar Krzysztof Wilczyński Committed by Bjorn Helgaas
Browse files

PCI: Correct misspelled words 

Fix a number of misspelled words, and while at it, correct two phrases used
to indicate a status of an operation where words used have been cleverly
truncated and thus always trigger a spellchecking error while performing a
static code analysis over the PCI tree.

[bhelgaas: reverse sense of quirk ternary]
Link: https://lore.kernel.org/r/20220107225942.121484-1-kw@linux.com


Signed-off-by: default avatarKrzysztof Wilczyński <kw@linux.com>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
parent fb82437f

drivers/pci/controller/cadence/pcie-cadence.h

+1 −1
Original line number Diff line number Diff line
@@ -310,7 +310,7 @@ struct cdns_pcie { 
 *            single function at a time

 * @vendor_id: PCI vendor ID

 * @device_id: PCI device ID

 * @avail_ib_bar: Satus of RP_BAR0, RP_BAR1 and	RP_NO_BAR if it's free or

 * @avail_ib_bar: Status of RP_BAR0, RP_BAR1 and RP_NO_BAR if it's free or

 *                available

 * @quirk_retrain_flag: Retrain link as quirk for PCIe Gen2

 * @quirk_detect_quiet_flag: LTSSM Detect Quiet min delay set as quirk

drivers/pci/controller/pcie-mediatek-gen3.c

+1 −1
Original line number Diff line number Diff line
@@ -303,7 +303,7 @@ static int mtk_pcie_startup_port(struct mtk_pcie_port *port) 
	writel_relaxed(val, port->base + PCIE_RST_CTRL_REG);



	/*

	 * Described in PCIe CEM specification setctions 2.2 (PERST# Signal)

	 * Described in PCIe CEM specification sections 2.2 (PERST# Signal)

	 * and 2.2.1 (Initial Power-Up (G3 to S0)).

	 * The deassertion of PERST# should be delayed 100ms (TPVPERL)

	 * for the power and clock to become stable.

drivers/pci/endpoint/functions/pci-epf-ntb.c

+1 −1
Original line number Diff line number Diff line
@@ -1262,7 +1262,7 @@ static void epf_ntb_db_mw_bar_cleanup(struct epf_ntb *ntb, 
}



/**

 * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capaiblity

 * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capability

 * @ntb: NTB device that facilitates communication between HOST1 and HOST2

 * @type: PRIMARY interface or SECONDARY interface

 *

drivers/pci/of.c

+1 −1
Original line number Diff line number Diff line
@@ -247,7 +247,7 @@ void of_pci_check_probe_only(void) 
	else

		pci_clear_flags(PCI_PROBE_ONLY);



	pr_info("PROBE_ONLY %sabled\n", val ? "en" : "dis");

	pr_info("PROBE_ONLY %s\n", val ? "enabled" : "disabled");

}

EXPORT_SYMBOL_GPL(of_pci_check_probe_only);

drivers/pci/quirks.c

+2 −2
Original line number Diff line number Diff line
@@ -980,8 +980,8 @@ static void quirk_via_ioapic(struct pci_dev *dev) 
	else

		tmp = 0x1f; /* all known bits (4-0) routed to external APIC */



	pci_info(dev, "%sbling VIA external APIC routing\n",

	       tmp == 0 ? "Disa" : "Ena");

	pci_info(dev, "%s VIA external APIC routing\n",

		 tmp ? "Enabling" : "Disabling");



	/* Offset 0x58: External APIC IRQ output control */

	pci_write_config_byte(dev, 0x58, tmp);