Merge tag 'wireless-next-2023-04-21' of... (ca288965) · Commits · EulixOS / Software / Kernel

Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml

+5 −0

Original line number	Diff line number	Diff line
		@@ -111,6 +111,11 @@ properties:
		$ref: /schemas/leds/common.yaml#
		additionalProperties: false
		properties:
		led-active-low:
		description:
		LED is enabled with ground signal.
		type: boolean

		led-sources:
		maxItems: 1

Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt

deleted100644 → 0

+0 −215

Original line number	Diff line number	Diff line
		* Qualcomm Atheros ath10k wireless devices

		Required properties:
		- compatible: Should be one of the following:
		* "qcom,ath10k"
		* "qcom,ipq4019-wifi"
		* "qcom,wcn3990-wifi"

		PCI based devices uses compatible string "qcom,ath10k" and takes calibration
		data along with board specific data via "qcom,ath10k-calibration-data".
		Rest of the properties are not applicable for PCI based devices.

		AHB based devices (i.e. ipq4019) uses compatible string "qcom,ipq4019-wifi"
		and also uses most of the properties defined in this doc (except
		"qcom,ath10k-calibration-data"). It uses "qcom,ath10k-pre-calibration-data"
		to carry pre calibration data.

		In general, entry "qcom,ath10k-pre-calibration-data" and
		"qcom,ath10k-calibration-data" conflict with each other and only one
		can be provided per device.

		SNOC based devices (i.e. wcn3990) uses compatible string "qcom,wcn3990-wifi".

		- reg: Address and length of the register set for the device.
		- reg-names: Must include the list of following reg names,
		"membase"
		- interrupts: reference to the list of 17 interrupt numbers for "qcom,ipq4019-wifi"
		compatible target.
		reference to the list of 12 interrupt numbers for "qcom,wcn3990-wifi"
		compatible target.
		Must contain interrupt-names property per entry for
		"qcom,ath10k", "qcom,ipq4019-wifi" compatible targets.

		- interrupt-names: Must include the entries for MSI interrupt
		names ("msi0" to "msi15") and legacy interrupt
		name ("legacy") for "qcom,ath10k", "qcom,ipq4019-wifi"
		compatible targets.

		Optional properties:
		- resets: Must contain an entry for each entry in reset-names.
		See ../reset/reseti.txt for details.
		- reset-names: Must include the list of following reset names,
		"wifi_cpu_init"
		"wifi_radio_srif"
		"wifi_radio_warm"
		"wifi_radio_cold"
		"wifi_core_warm"
		"wifi_core_cold"
		- clocks: List of clock specifiers, must contain an entry for each required
		entry in clock-names.
		- clock-names: Should contain the clock names "wifi_wcss_cmd", "wifi_wcss_ref",
		"wifi_wcss_rtc" for "qcom,ipq4019-wifi" compatible target and
		"cxo_ref_clk_pin" and optionally "qdss" for "qcom,wcn3990-wifi"
		compatible target.
		- qcom,msi_addr: MSI interrupt address.
		- qcom,msi_base: Base value to add before writing MSI data into
		MSI address register.
		- qcom,ath10k-calibration-variant: string to search for in the board-2.bin
		variant list with the same bus and device
		specific ids
		- qcom,ath10k-calibration-data : calibration data + board specific data
		as an array, the length can vary between
		hw versions.
		- qcom,ath10k-pre-calibration-data : pre calibration data as an array,
		the length can vary between hw versions.
		- <supply-name>-supply: handle to the regulator device tree node
		optional "supply-name" are "vdd-0.8-cx-mx",
		"vdd-1.8-xo", "vdd-1.3-rfa", "vdd-3.3-ch0",
		and "vdd-3.3-ch1".
		- memory-region:
		Usage: optional
		Value type: <phandle>
		Definition: reference to the reserved-memory for the msa region
		used by the wifi firmware running in Q6.
		- iommus:
		Usage: optional
		Value type: <prop-encoded-array>
		Definition: A list of phandle and IOMMU specifier pairs.
		- ext-fem-name:
		Usage: Optional
		Value type: string
		Definition: Name of external front end module used. Some valid FEM names
		for example: "microsemi-lx5586", "sky85703-11"
		and "sky85803" etc.
		- qcom,snoc-host-cap-8bit-quirk:
		Usage: Optional
		Value type: <empty>
		Definition: Quirk specifying that the firmware expects the 8bit version
		of the host capability QMI request
		- qcom,xo-cal-data: xo cal offset to be configured in xo trim register.

		- qcom,msa-fixed-perm: Boolean context flag to disable SCM call for statically
		mapped msa region.

		- qcom,coexist-support : should contain eithr "0" or "1" to indicate coex
		support by the hardware.
		- qcom,coexist-gpio-pin : gpio pin number information to support coex
		which will be used by wifi firmware.

		* Subnodes
		The ath10k wifi node can contain one optional firmware subnode.
		Firmware subnode is needed when the platform does not have TustZone.
		The firmware subnode must have:

		- iommus:
		Usage: required
		Value type: <prop-encoded-array>
		Definition: A list of phandle and IOMMU specifier pairs.


		Example (to supply PCI based wifi block details):

		In this example, the node is defined as child node of the PCI controller.

		pci {
		pcie@0 {
		reg = <0 0 0 0 0>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";

		wifi@0,0 {
		reg = <0 0 0 0 0>;
		qcom,ath10k-calibration-data = [ 01 02 03 ... ];
		ext-fem-name = "microsemi-lx5586";
		};
		};
		};

		Example (to supply ipq4019 SoC wifi block details):

		wifi0: wifi@a000000 {
		compatible = "qcom,ipq4019-wifi";
		reg = <0xa000000 0x200000>;
		resets = <&gcc WIFI0_CPU_INIT_RESET>,
		<&gcc WIFI0_RADIO_SRIF_RESET>,
		<&gcc WIFI0_RADIO_WARM_RESET>,
		<&gcc WIFI0_RADIO_COLD_RESET>,
		<&gcc WIFI0_CORE_WARM_RESET>,
		<&gcc WIFI0_CORE_COLD_RESET>;
		reset-names = "wifi_cpu_init",
		"wifi_radio_srif",
		"wifi_radio_warm",
		"wifi_radio_cold",
		"wifi_core_warm",
		"wifi_core_cold";
		clocks = <&gcc GCC_WCSS2G_CLK>,
		<&gcc GCC_WCSS2G_REF_CLK>,
		<&gcc GCC_WCSS2G_RTC_CLK>;
		clock-names = "wifi_wcss_cmd",
		"wifi_wcss_ref",
		"wifi_wcss_rtc";
		interrupts = <0 0x20 0x1>,
		<0 0x21 0x1>,
		<0 0x22 0x1>,
		<0 0x23 0x1>,
		<0 0x24 0x1>,
		<0 0x25 0x1>,
		<0 0x26 0x1>,
		<0 0x27 0x1>,
		<0 0x28 0x1>,
		<0 0x29 0x1>,
		<0 0x2a 0x1>,
		<0 0x2b 0x1>,
		<0 0x2c 0x1>,
		<0 0x2d 0x1>,
		<0 0x2e 0x1>,
		<0 0x2f 0x1>,
		<0 0xa8 0x0>;
		interrupt-names = "msi0", "msi1", "msi2", "msi3",
		"msi4", "msi5", "msi6", "msi7",
		"msi8", "msi9", "msi10", "msi11",
		"msi12", "msi13", "msi14", "msi15",
		"legacy";
		qcom,msi_addr = <0x0b006040>;
		qcom,msi_base = <0x40>;
		qcom,ath10k-pre-calibration-data = [ 01 02 03 ... ];
		qcom,coexist-support = <1>;
		qcom,coexist-gpio-pin = <0x33>;
		};

		Example (to supply wcn3990 SoC wifi block details):

		wifi@18000000 {
		compatible = "qcom,wcn3990-wifi";
		reg = <0x18800000 0x800000>;
		reg-names = "membase";
		clocks = <&clock_gcc clk_rf_clk2_pin>;
		clock-names = "cxo_ref_clk_pin";
		interrupts =
		<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
		vdd-0.8-cx-mx-supply = <&pm8998_l5>;
		vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
		vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
		vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
		vdd-3.3-ch1-supply = <&vreg_l26a_3p3>;
		memory-region = <&wifi_msa_mem>;
		iommus = <&apps_smmu 0x0040 0x1>;
		qcom,msa-fixed-perm;
		wifi-firmware {
		iommus = <&apps_iommu 0xc22 0x1>;
		};
		};

Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml

0 → 100644

+358 −0

Original line number	Diff line number	Diff line
		# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
		%YAML 1.2
		---
		$id: http://devicetree.org/schemas/net/wireless/qcom,ath10k.yaml#
		$schema: http://devicetree.org/meta-schemas/core.yaml#

		title: Qualcomm Technologies ath10k wireless devices

		maintainers:
		- Kalle Valo <kvalo@kernel.org>

		description:
		Qualcomm Technologies, Inc. IEEE 802.11ac devices.

		properties:
		compatible:
		enum:
		- qcom,ath10k # SDIO-based devices
		- qcom,ipq4019-wifi
		- qcom,wcn3990-wifi # SNoC-based devices

		reg:
		maxItems: 1

		reg-names:
		items:
		- const: membase

		interrupts:
		minItems: 12
		maxItems: 17

		interrupt-names:
		minItems: 12
		maxItems: 17

		memory-region:
		maxItems: 1
		description:
		Reference to the MSA memory region used by the Wi-Fi firmware
		running on the Q6 core.

		iommus:
		minItems: 1
		maxItems: 2

		clocks:
		minItems: 1
		maxItems: 3

		clock-names:
		minItems: 1
		maxItems: 3

		resets:
		maxItems: 6

		reset-names:
		items:
		- const: wifi_cpu_init
		- const: wifi_radio_srif
		- const: wifi_radio_warm
		- const: wifi_radio_cold
		- const: wifi_core_warm
		- const: wifi_core_cold

		ext-fem-name:
		$ref: /schemas/types.yaml#/definitions/string
		description: Name of external front end module used.
		enum:
		- microsemi-lx5586
		- sky85703-11
		- sky85803

		wifi-firmware:
		type: object
		additionalProperties: false
		description: \|
		The ath10k Wi-Fi node can contain one optional firmware subnode.
		Firmware subnode is needed when the platform does not have Trustzone.
		properties:
		iommus:
		maxItems: 1
		required:
		- iommus

		qcom,ath10k-calibration-data:
		$ref: /schemas/types.yaml#/definitions/uint8-array
		description:
		Calibration data + board-specific data as a byte array. The length
		can vary between hardware versions.

		qcom,ath10k-calibration-variant:
		$ref: /schemas/types.yaml#/definitions/string
		description:
		Unique variant identifier of the calibration data in board-2.bin
		for designs with colliding bus and device specific ids

		qcom,ath10k-pre-calibration-data:
		$ref: /schemas/types.yaml#/definitions/uint8-array
		description:
		Pre-calibration data as a byte array. The length can vary between
		hardware versions.

		qcom,coexist-support:
		$ref: /schemas/types.yaml#/definitions/uint8
		enum: [0, 1]
		description:
		Indicate coex support by the hardware.

		qcom,coexist-gpio-pin:
		$ref: /schemas/types.yaml#/definitions/uint32
		description:
		COEX GPIO number provided to the Wi-Fi firmware.

		qcom,msa-fixed-perm:
		type: boolean
		description:
		Whether to skip executing an SCM call that reassigns the memory
		region ownership.

		qcom,smem-states:
		$ref: /schemas/types.yaml#/definitions/phandle-array
		description: State bits used by the AP to signal the WLAN Q6.
		items:
		- description: Signal bits used to enable/disable low power mode
		on WCN in the case of WoW (Wake on Wireless).

		qcom,smem-state-names:
		description: The names of the state bits used for SMP2P output.
		items:
		- const: wlan-smp2p-out

		qcom,snoc-host-cap-8bit-quirk:
		type: boolean
		description:
		Quirk specifying that the firmware expects the 8bit version
		of the host capability QMI request

		qcom,xo-cal-data:
		$ref: /schemas/types.yaml#/definitions/uint32
		description:
		XO cal offset to be configured in XO trim register.

		vdd-0.8-cx-mx-supply:
		description: Main logic power rail

		vdd-1.8-xo-supply:
		description: Crystal oscillator supply

		vdd-1.3-rfa-supply:
		description: RFA supply

		vdd-3.3-ch0-supply:
		description: Primary Wi-Fi antenna supply

		vdd-3.3-ch1-supply:
		description: Secondary Wi-Fi antenna supply

		required:
		- compatible
		- reg

		additionalProperties: false

		allOf:
		- if:
		properties:
		compatible:
		contains:
		enum:
		- qcom,ipq4019-wifi
		then:
		properties:
		interrupts:
		minItems: 17
		maxItems: 17

		interrupt-names:
		items:
		- const: msi0
		- const: msi1
		- const: msi2
		- const: msi3
		- const: msi4
		- const: msi5
		- const: msi6
		- const: msi7
		- const: msi8
		- const: msi9
		- const: msi10
		- const: msi11
		- const: msi12
		- const: msi13
		- const: msi14
		- const: msi15
		- const: legacy

		clocks:
		items:
		- description: Wi-Fi command clock
		- description: Wi-Fi reference clock
		- description: Wi-Fi RTC clock

		clock-names:
		items:
		- const: wifi_wcss_cmd
		- const: wifi_wcss_ref
		- const: wifi_wcss_rtc

		required:
		- clocks
		- clock-names
		- interrupts
		- interrupt-names
		- resets
		- reset-names

		- if:
		properties:
		compatible:
		contains:
		enum:
		- qcom,wcn3990-wifi

		then:
		properties:
		clocks:
		minItems: 1
		items:
		- description: XO reference clock
		- description: Qualcomm Debug Subsystem clock

		clock-names:
		minItems: 1
		items:
		- const: cxo_ref_clk_pin
		- const: qdss

		interrupts:
		items:
		- description: CE0
		- description: CE1
		- description: CE2
		- description: CE3
		- description: CE4
		- description: CE5
		- description: CE6
		- description: CE7
		- description: CE8
		- description: CE9
		- description: CE10
		- description: CE11

		interrupt-names: false

		required:
		- interrupts

		examples:
		# SNoC
		- \|
		#include <dt-bindings/clock/qcom,rpmcc.h>
		#include <dt-bindings/interrupt-controller/arm-gic.h>

		wifi@18800000 {
		compatible = "qcom,wcn3990-wifi";
		reg = <0x18800000 0x800000>;
		reg-names = "membase";
		memory-region = <&wlan_msa_mem>;
		clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
		clock-names = "cxo_ref_clk_pin";
		interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
		iommus = <&anoc2_smmu 0x1900>,
		<&anoc2_smmu 0x1901>;
		qcom,snoc-host-cap-8bit-quirk;
		vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
		vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
		vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
		vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
		vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;

		wifi-firmware {
		iommus = <&apps_smmu 0x1c02 0x1>;
		};
		};

		# AHB
		- \|
		#include <dt-bindings/clock/qcom,gcc-ipq4019.h>

		wifi@a000000 {
		compatible = "qcom,ipq4019-wifi";
		reg = <0xa000000 0x200000>;
		resets = <&gcc WIFI0_CPU_INIT_RESET>,
		<&gcc WIFI0_RADIO_SRIF_RESET>,
		<&gcc WIFI0_RADIO_WARM_RESET>,
		<&gcc WIFI0_RADIO_COLD_RESET>,
		<&gcc WIFI0_CORE_WARM_RESET>,
		<&gcc WIFI0_CORE_COLD_RESET>;
		reset-names = "wifi_cpu_init",
		"wifi_radio_srif",
		"wifi_radio_warm",
		"wifi_radio_cold",
		"wifi_core_warm",
		"wifi_core_cold";
		clocks = <&gcc GCC_WCSS2G_CLK>,
		<&gcc GCC_WCSS2G_REF_CLK>,
		<&gcc GCC_WCSS2G_RTC_CLK>;
		clock-names = "wifi_wcss_cmd",
		"wifi_wcss_ref",
		"wifi_wcss_rtc";
		interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
		<GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
		<GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
		<GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
		<GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
		<GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
		<GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
		<GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
		<GIC_SPI 40 IRQ_TYPE_EDGE_RISING>,
		<GIC_SPI 41 IRQ_TYPE_EDGE_RISING>,
		<GIC_SPI 42 IRQ_TYPE_EDGE_RISING>,
		<GIC_SPI 43 IRQ_TYPE_EDGE_RISING>,
		<GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
		<GIC_SPI 45 IRQ_TYPE_EDGE_RISING>,
		<GIC_SPI 46 IRQ_TYPE_EDGE_RISING>,
		<GIC_SPI 47 IRQ_TYPE_EDGE_RISING>,
		<GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-names = "msi0",
		"msi1",
		"msi2",
		"msi3",
		"msi4",
		"msi5",
		"msi6",
		"msi7",
		"msi8",
		"msi9",
		"msi10",
		"msi11",
		"msi12",
		"msi13",
		"msi14",
		"msi15",
		"legacy";
		};

Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml

0 → 100644

+58 −0

Original line number	Diff line number	Diff line
		# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
		# Copyright (c) 2023 Linaro Limited
		%YAML 1.2
		---
		$id: http://devicetree.org/schemas/net/wireless/qcom,ath11k-pci.yaml#
		$schema: http://devicetree.org/meta-schemas/core.yaml#

		title: Qualcomm Technologies ath11k wireless devices (PCIe)

		maintainers:
		- Kalle Valo <kvalo@kernel.org>

		description: \|
		Qualcomm Technologies IEEE 802.11ax PCIe devices

		properties:
		compatible:
		enum:
		- pci17cb,1103 # WCN6855

		reg:
		maxItems: 1

		qcom,ath11k-calibration-variant:
		$ref: /schemas/types.yaml#/definitions/string
		description: \|
		string to uniquely identify variant of the calibration data for designs
		with colliding bus and device ids

		required:
		- compatible
		- reg

		additionalProperties: false

		examples:
		- \|
		pcie {
		#address-cells = <3>;
		#size-cells = <2>;

		pcie@0 {
		device_type = "pci";
		reg = <0x0 0x0 0x0 0x0 0x0>;
		#address-cells = <3>;
		#size-cells = <2>;
		ranges;

		bus-range = <0x01 0xff>;

		wifi@0 {
		compatible = "pci17cb,1103";
		reg = <0x10000 0x0 0x0 0x0 0x0>;

		qcom,ath11k-calibration-variant = "LE_X13S";
		};
		};
		};

MAINTAINERS

+1 −1

Original line number	Diff line number	Diff line
		@@ -17241,7 +17241,7 @@ S: Supported
		W: https://wireless.wiki.kernel.org/en/users/Drivers/ath10k
		T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
		F: drivers/net/wireless/ath/ath10k/
		F: Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
		F: Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml

		QUALCOMM ATHEROS ATH11K WIRELESS DRIVER
		M: Kalle Valo <kvalo@kernel.org>