Commit c8f59a1f authored by Zoltan HERPAI's avatar Zoltan HERPAI Committed by Linus Walleij
Browse files

ARM: ixp4xx: Delete Gateway 7001 boardfiles



This board is replaced with the corresponding device tree.

Cc: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: default avatarZoltan HERPAI <wigyori@uid0.hu>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220211223238.648934-2-linus.walleij@linaro.org


Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent e783362e
Loading
Loading
Loading
Loading
+0 −8
Original line number Diff line number Diff line
@@ -17,14 +17,6 @@ config MACH_IXP4XX_OF
	help
	  Say 'Y' here to support Device Tree-based IXP4xx platforms.

config MACH_GATEWAY7001
	bool "Gateway 7001"
	depends on IXP4XX_PCI_LEGACY
	help
	  Say 'Y' here if you want your kernel to support Gateway's
	  7001 Access Point. For more information on this platform,
	  see http://openwrt.org

config MACH_GORAMO_MLR
	bool "GORAMO Multi Link Router"
	depends on IXP4XX_PCI_LEGACY
+0 −3
Original line number Diff line number Diff line
@@ -9,11 +9,8 @@ obj-pci-n :=
# Device tree platform
obj-pci-$(CONFIG_MACH_IXP4XX_OF)	+= ixp4xx-of.o

obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o

obj-y	+= common.o

obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o

obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+0 −61
Original line number Diff line number Diff line
// SPDX-License-Identifier: GPL-2.0-only
/*
 * arch/arch/mach-ixp4xx/gateway7001-pci.c
 *
 * PCI setup routines for Gateway 7001
 *
 * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
 *
 * based on coyote-pci.c:
 *	Copyright (C) 2002 Jungo Software Technologies.
 *	Copyright (C) 2003 MontaVista Softwrae, Inc.
 *
 * Maintainer: Imre Kaloz <kaloz@openwrt.org>
 */

#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/irq.h>

#include <asm/mach-types.h>
#include <mach/hardware.h>

#include <asm/mach/pci.h>

#include "irqs.h"

void __init gateway7001_pci_preinit(void)
{
	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
	irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);

	ixp4xx_pci_preinit();
}

static int __init gateway7001_map_irq(const struct pci_dev *dev, u8 slot,
	u8 pin)
{
	if (slot == 1)
		return IRQ_IXP4XX_GPIO11;
	else if (slot == 2)
		return IRQ_IXP4XX_GPIO10;
	else return -1;
}

struct hw_pci gateway7001_pci __initdata = {
	.nr_controllers = 1,
	.ops		= &ixp4xx_ops,
	.preinit =        gateway7001_pci_preinit,
	.setup =          ixp4xx_setup,
	.map_irq =        gateway7001_map_irq,
};

int __init gateway7001_pci_init(void)
{
	if (machine_is_gateway7001())
		pci_common_init(&gateway7001_pci);
	return 0;
}

subsys_initcall(gateway7001_pci_init);
+0 −113
Original line number Diff line number Diff line
// SPDX-License-Identifier: GPL-2.0
/*
 * arch/arm/mach-ixp4xx/gateway7001-setup.c
 *
 * Board setup for the Gateway 7001 board
 *
 * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
 *
 * based on coyote-setup.c:
 *      Copyright (C) 2003-2005 MontaVista Software, Inc.
 *
 * Author: Imre Kaloz <Kaloz@openwrt.org>
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>

#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>

#include "irqs.h"

static struct flash_platform_data gateway7001_flash_data = {
	.map_name	= "cfi_probe",
	.width		= 2,
};

static struct resource gateway7001_flash_resource = {
	.flags		= IORESOURCE_MEM,
};

static struct platform_device gateway7001_flash = {
	.name		= "IXP4XX-Flash",
	.id		= 0,
	.dev		= {
		.platform_data = &gateway7001_flash_data,
	},
	.num_resources	= 1,
	.resource	= &gateway7001_flash_resource,
};

static struct resource gateway7001_uart_resource = {
	.start	= IXP4XX_UART2_BASE_PHYS,
	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
	.flags	= IORESOURCE_MEM,
};

static struct plat_serial8250_port gateway7001_uart_data[] = {
	{
		.mapbase	= IXP4XX_UART2_BASE_PHYS,
		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
		.irq		= IRQ_IXP4XX_UART2,
		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
		.iotype		= UPIO_MEM,
		.regshift	= 2,
		.uartclk	= IXP4XX_UART_XTAL,
	},
	{ },
};

static struct platform_device gateway7001_uart = {
	.name		= "serial8250",
	.id		= PLAT8250_DEV_PLATFORM,
	.dev			= {
		.platform_data	= gateway7001_uart_data,
	},
	.num_resources	= 1,
	.resource	= &gateway7001_uart_resource,
};

static struct platform_device *gateway7001_devices[] __initdata = {
	&gateway7001_flash,
	&gateway7001_uart
};

static void __init gateway7001_init(void)
{
	ixp4xx_sys_init();

	gateway7001_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
	gateway7001_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;

	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;

	platform_add_devices(gateway7001_devices, ARRAY_SIZE(gateway7001_devices));
}

#ifdef CONFIG_MACH_GATEWAY7001
MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
	.map_io		= ixp4xx_map_io,
	.init_early	= ixp4xx_init_early,
	.init_irq	= ixp4xx_init_irq,
	.init_time	= ixp4xx_timer_init,
	.atag_offset	= 0x100,
	.init_machine	= gateway7001_init,
#if defined(CONFIG_PCI)
	.dma_zone_size	= SZ_64M,
#endif
	.restart	= ixp4xx_restart,
MACHINE_END
#endif