Commit c5dab2e9 authored by Chris Brandt's avatar Chris Brandt Committed by Simon Horman
Browse files

ARM: dts: rza2mevb: Add Ethernet support 



The RZ/A2M EVB sub board has 2 Ethernet jacks on it.

Set switch SW6_4	to ON to use Ethernet Ch-0
Set switch SW6_5	to ON to use Ethernet Ch-1

Signed-off-by: default avatarChris Brandt <chris.brandt@renesas.com>
Reviewed-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent a49f76cd

arch/arm/boot/dts/r7s9210-rza2mevb.dts

+50 −0
Original line number Diff line number Diff line
@@ -62,6 +62,34 @@ 
		pinmux = <RZA2_PINMUX(PORT9, 0, 4)>,	/* TxD4 */

			 <RZA2_PINMUX(PORT9, 1, 4)>;	/* RxD4 */

	};



	eth0_pins: eth0 {

		pinmux = <RZA2_PINMUX(PORTE, 0, 7)>, /* REF50CK0 */

			 <RZA2_PINMUX(PORT6, 1, 7)>, /* RMMI0_TXDEN */

			 <RZA2_PINMUX(PORT6, 2, 7)>, /* RMII0_TXD0 */

			 <RZA2_PINMUX(PORT6, 3, 7)>, /* RMII0_TXD1 */

			 <RZA2_PINMUX(PORTE, 4, 7)>, /* RMII0_CRSDV */

			 <RZA2_PINMUX(PORTE, 1, 7)>, /* RMII0_RXD0 */

			 <RZA2_PINMUX(PORTE, 2, 7)>, /* RMII0_RXD1 */

			 <RZA2_PINMUX(PORTE, 3, 7)>, /* RMII0_RXER */

			 <RZA2_PINMUX(PORTE, 5, 1)>, /* ET0_MDC */

			 <RZA2_PINMUX(PORTE, 6, 1)>, /* ET0_MDIO */

			 <RZA2_PINMUX(PORTL, 0, 5)>; /* IRQ4 */

	};



	eth1_pins: eth1 {

		pinmux = <RZA2_PINMUX(PORTK, 3, 7)>, /* REF50CK1 */

			 <RZA2_PINMUX(PORTK, 0, 7)>, /* RMMI1_TXDEN */

			 <RZA2_PINMUX(PORTK, 1, 7)>, /* RMII1_TXD0 */

			 <RZA2_PINMUX(PORTK, 2, 7)>, /* RMII1_TXD1 */

			 <RZA2_PINMUX(PORT3, 2, 7)>, /* RMII1_CRSDV */

			 <RZA2_PINMUX(PORTK, 4, 7)>, /* RMII1_RXD0 */

			 <RZA2_PINMUX(PORT3, 5, 7)>, /* RMII1_RXD1 */

			 <RZA2_PINMUX(PORT3, 1, 7)>, /* RMII1_RXER */

			 <RZA2_PINMUX(PORT3, 3, 1)>, /* ET1_MDC */

			 <RZA2_PINMUX(PORT3, 4, 1)>, /* ET1_MDIO */

			 <RZA2_PINMUX(PORTL, 1, 5)>; /* IRQ5 */

	};

};



/* High resolution System tick timers */
@@ -80,3 +108,25 @@ 


	status = "okay";

};



&ether0 {

	pinctrl-names = "default";

	pinctrl-0 = <&eth0_pins>;

	status = "okay";

	renesas,no-ether-link;

	phy-handle = <&phy0>;

	phy0: ethernet-phy@0 {

		reg = <0>;

	};

};



&ether1 {

	pinctrl-names = "default";

	pinctrl-0 = <&eth1_pins>;

	status = "okay";

	renesas,no-ether-link;

	phy-handle = <&phy1>;

	phy1: ethernet-phy@1 {

		reg = <0>;

	};

};