Commit c4c85b51 authored by Florian Fainelli's avatar Florian Fainelli Committed by Miquel Raynal
Browse files

mtd: rawnand: brcmnand: Add individual glue driver selection 



Allow each platform to define a dedicated Kconfig entry for its glue
driver such that we can decide on a per-platfomr basis whether to build
it or not. This allows for a finer grained control over the resulting
kernel image or set of modules.

Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarMiquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220711222323.4048197-3-f.fainelli@gmail.com
parent 1dd4fd87

drivers/mtd/nand/raw/brcmnand/Kconfig

+28 −0
Original line number Diff line number Diff line
@@ -9,6 +9,13 @@ config MTD_NAND_BRCMNAND 


if MTD_NAND_BRCMNAND



config MTD_NAND_BRCMNAND_BCM63XX

	tristate "Broadcom BCM63xx NAND controller glue"

	default BCM63XX

	help

	  Enables the BRCMNAND glue driver to register the NAND controller

	  on Broadcom BCM63xx MIPS-based DSL platforms.



config MTD_NAND_BRCMNAND_BCMA

	tristate "Broadcom BCMA NAND controller"

	depends on BCMA_NFLASH
@@ -18,4 +25,25 @@ config MTD_NAND_BRCMNAND_BCMA 
	  The glue driver will take care of performing the low-level I/O

	  operations to interface the BRCMNAND controller over the BCMA bus.



config MTD_NAND_BRCMNAND_BCMBCA

	tristate "Broadcom BCMBCA NAND controller glue"

	default ARCH_BCMBCA

	help

	  Enables the BRCMNAND glue driver to register the NAND controller

	  on Broadcom BCA platforms.



config MTD_NAND_BRCMNAND_BRCMSTB

	tristate "Broadcom STB Nand controller glue"

	default ARCH_BRCMSTB

	help

	  Enables the BRCMNAND glue driver to register the NAND controller

	  on Broadcom STB platforms.



config MTD_NAND_BRCMNAND_IPROC

	tristate "Broadcom iProc NAND controller glue"

	default ARCH_BCM_IPROC

	help

	  Enables the BRCMNAND controller glue driver to register the NAND

	  controller on Broadcom iProc platforms.



endif # MTD_NAND_BRCMNAND

drivers/mtd/nand/raw/brcmnand/Makefile

+4 −4
Original line number Diff line number Diff line 
# SPDX-License-Identifier: GPL-2.0

# link order matters; don't link the more generic brcmstb_nand.o before the

# more specific iproc_nand.o, for instance

obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= iproc_nand.o

obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= bcm63138_nand.o

obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= bcm6368_nand.o

obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= brcmstb_nand.o

obj-$(CONFIG_MTD_NAND_BRCMNAND_IPROC)	+= iproc_nand.o

obj-$(CONFIG_MTD_NAND_BRCMNAND_BCMBCA)	+= bcm63138_nand.o

obj-$(CONFIG_MTD_NAND_BRCMNAND_BCM63XX)	+= bcm6368_nand.o

obj-$(CONFIG_MTD_NAND_BRCMNAND_BRCMSTB)	+= brcmstb_nand.o

obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= brcmnand.o



obj-$(CONFIG_MTD_NAND_BRCMNAND_BCMA)	+= bcma_nand.o