Commit c374e00e authored by Scott Wood's avatar Scott Wood Committed by Kumar Gala
Browse files

[POWERPC] Add early debug console for CPM serial ports. 



This code assumes that the ports have been previously set up, with
buffers in DPRAM.

Signed-off-by: default avatarScott Wood <scottwood@freescale.com>
Acked-by: default avatarDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent e631ae3b

arch/powerpc/Kconfig.debug

+21 −0
Original line number Diff line number Diff line
@@ -221,6 +221,15 @@ config PPC_EARLY_DEBUG_44x 
	  Select this to enable early debugging for IBM 44x chips via the

	  inbuilt serial port.



config PPC_EARLY_DEBUG_CPM

	bool "Early serial debugging for Freescale CPM-based serial ports"

	depends on SERIAL_CPM

	select PIN_TLB if PPC_8xx

	help

	  Select this to enable early debugging for Freescale chips

	  using a CPM-based serial port.  This assumes that the bootwrapper

	  has run, and set up the CPM in a particular way.



endchoice



config PPC_EARLY_DEBUG_44x_PHYSLOW
@@ -233,4 +242,16 @@ config PPC_EARLY_DEBUG_44x_PHYSHIGH 
	depends PPC_EARLY_DEBUG_44x

	default "0x1"



config PPC_EARLY_DEBUG_CPM_ADDR

	hex "CPM UART early debug transmit descriptor address"

	depends on PPC_EARLY_DEBUG_CPM

	default "0xfa202808" if PPC_EP88XC

	default "0xf0000808" if CPM2

	default "0xff002808" if CPM1

	help

	  This specifies the address of the transmit descriptor

	  used for early debug output.  Because it is needed before

	  platform probing is done, all platforms selected must

	  share the same address.



endmenu

arch/powerpc/kernel/head_32.S

+16 −0
Original line number Diff line number Diff line
@@ -149,6 +149,9 @@ __after_mmu_off: 
#if defined(CONFIG_BOOTX_TEXT)

	bl	setup_disp_bat

#endif

#ifdef CONFIG_PPC_EARLY_DEBUG_CPM

	bl	setup_cpm_bat

#endif



/*

 * Call setup_cpu for CPU 0 and initialize 6xx Idle
@@ -1245,6 +1248,19 @@ setup_disp_bat: 
	blr

#endif /* CONFIG_BOOTX_TEXT */



#ifdef CONFIG_PPC_EARLY_DEBUG_CPM

setup_cpm_bat:

	lis	r8, 0xf000

	ori	r8, r8,	0x002a

	mtspr	SPRN_DBAT1L, r8



	lis	r11, 0xf000

	ori	r11, r11, (BL_1M << 2) | 2

	mtspr	SPRN_DBAT1U, r11



	blr

#endif



#ifdef CONFIG_8260

/* Jump into the system reset for the rom.

 * We first disable the MMU, and then jump to the ROM reset address.

arch/powerpc/kernel/udbg.c

+2 −0
Original line number Diff line number Diff line
@@ -54,6 +54,8 @@ void __init udbg_early_init(void) 
#elif defined(CONFIG_PPC_EARLY_DEBUG_44x)

	/* PPC44x debug */

	udbg_init_44x_as1();

#elif defined(CONFIG_PPC_EARLY_DEBUG_CPM)

	udbg_init_cpm();

#endif

}

arch/powerpc/platforms/8xx/Kconfig

+1 −0
Original line number Diff line number Diff line
@@ -3,6 +3,7 @@ config FADS 


config CPM1

	bool

	select CPM



choice

	prompt "8xx Machine Type"

arch/powerpc/platforms/Kconfig

+4 −0
Original line number Diff line number Diff line
@@ -273,6 +273,7 @@ config QUICC_ENGINE 
config CPM2

	bool

	default n

	select CPM

	help

	  The CPM2 (Communications Processor Module) is a coprocessor on

	  embedded CPUs made by Freescale.  Selecting this option means that
@@ -309,4 +310,7 @@ config FSL_ULI1575 
	  Freescale reference boards. The boards all use the ULI in pretty

	  much the same way.



config CPM

	bool



endmenu