Merge branch 'next' into for-linus (bb0bc0cf) · Commits · EulixOS / Software / Kernel

Documentation/devicetree/bindings/input/adc-joystick.yaml

0 → 100644

+121 −0

Original line number	Original line	Diff line number	Diff line
			# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
			# Copyright 2019-2020 Artur Rojek
			%YAML 1.2
			---
			$id: "http://devicetree.org/schemas/input/adc-joystick.yaml#"
			$schema: "http://devicetree.org/meta-schemas/core.yaml#"

			title: ADC attached joystick

			maintainers:
			- Artur Rojek <contact@artur-rojek.eu>

			description: >
			Bindings for joystick devices connected to ADC controllers supporting
			the Industrial I/O subsystem.

			properties:
			compatible:
			const: adc-joystick

			io-channels:
			minItems: 1
			maxItems: 1024
			description: >
			List of phandle and IIO specifier pairs.
			Each pair defines one ADC channel to which a joystick axis is connected.
			See Documentation/devicetree/bindings/iio/iio-bindings.txt for details.

			'#address-cells':
			const: 1

			'#size-cells':
			const: 0

			required:
			- compatible
			- io-channels
			- '#address-cells'
			- '#size-cells'

			additionalProperties: false

			patternProperties:
			"^axis@[0-9a-f]+$":
			type: object
			description: >
			Represents a joystick axis bound to the given ADC channel.
			For each entry in the io-channels list, one axis subnode with a matching
			reg property must be specified.

			properties:
			reg:
			minimum: 0
			maximum: 1023
			description: Index of an io-channels list entry bound to this axis.

			linux,code:
			$ref: /schemas/types.yaml#/definitions/uint32
			description: EV_ABS specific event code generated by the axis.

			abs-range:
			allOf:
			- $ref: /schemas/types.yaml#/definitions/uint32-array
			- items:
			- description: minimum value
			- description: maximum value
			description: >
			Minimum and maximum values produced by the axis.
			For an ABS_X axis this will be the left-most and right-most
			inclination of the joystick. If min > max, it is left to userspace to
			treat the axis as inverted.
			This property is interpreted as two signed 32 bit values.

			abs-fuzz:
			$ref: /schemas/types.yaml#/definitions/uint32
			description: >
			Amount of noise in the input value.
			Omitting this property indicates the axis is precise.

			abs-flat:
			$ref: /schemas/types.yaml#/definitions/uint32
			description: >
			Axial "deadzone", or area around the center position, where the axis
			is considered to be at rest.
			Omitting this property indicates the axis always returns to exactly
			the center position.

			required:
			- reg
			- linux,code
			- abs-range

			additionalProperties: false

			examples:
			- \|
			#include <dt-bindings/iio/adc/ingenic,adc.h>
			#include <dt-bindings/input/input.h>

			joystick: adc-joystick {
			compatible = "adc-joystick";
			io-channels = <&adc INGENIC_ADC_TOUCH_XP>,
			<&adc INGENIC_ADC_TOUCH_YP>;
			#address-cells = <1>;
			#size-cells = <0>;

			axis@0 {
			reg = <0>;
			linux,code = <ABS_X>;
			abs-range = <3300 0>;
			abs-fuzz = <4>;
			abs-flat = <200>;
			};
			axis@1 {
			reg = <1>;
			linux,code = <ABS_Y>;
			abs-range = <0 3300>;
			abs-fuzz = <4>;
			abs-flat = <200>;
			};
			};

Documentation/devicetree/bindings/input/touchscreen/zinitix.txt

0 → 100644

+40 −0

Original line number	Original line	Diff line number	Diff line
			Device tree bindings for Zinitx BT541 touchscreen controller

			Required properties:

			- compatible : Should be "zinitix,bt541"
			- reg : I2C address of the chip. Should be 0x20
			- interrupts : Interrupt to which the chip is connected

			Optional properties:

			- vdd-supply : Analog power supply regulator on VCCA pin
			- vddo-supply : Digital power supply regulator on VDD pin
			- zinitix,mode : Mode of reporting touch points. Some modes may not work
			with a particular ts firmware for unknown reasons. Available
			modes are 1 and 2. Mode 2 is the default and preferred.

			The touchscreen-* properties are documented in touchscreen.txt in this
			directory.

			Example:

			i2c@00000000 {
			/* ... */

			bt541@20 {
			compatible = "zinitix,bt541";
			reg = <0x20>;
			interrupt-parent = <&msmgpio>;
			interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
			pinctrl-names = "default";
			pinctrl-0 = <&tsp_default>;
			vdd-supply = <&reg_vdd_tsp>;
			vddo-supply = <&pm8916_l6>;
			touchscreen-size-x = <540>;
			touchscreen-size-y = <960>;
			zinitix,mode = <2>;
			};

			/* ... */
			};

Documentation/devicetree/bindings/vendor-prefixes.yaml

+2 −0

Original line number	Original line	Diff line number	Diff line
	@@ -1143,6 +1143,8 @@ patternProperties:
	description: Shenzhen Zidoo Technology Co., Ltd.		description: Shenzhen Zidoo Technology Co., Ltd.
	"^zii,.*":		"^zii,.*":
	description: Zodiac Inflight Innovations		description: Zodiac Inflight Innovations
			"^zinitix,.*":
			description: Zinitix Co., Ltd
	"^zte,.*":		"^zte,.*":
	description: ZTE Corp.		description: ZTE Corp.
	"^zyxel,.*":		"^zyxel,.*":

MAINTAINERS

+7 −0

Original line number	Original line	Diff line number	Diff line
	@@ -15441,6 +15441,13 @@ F: Documentation/fb/sisfb.rst
	F: drivers/video/fbdev/sis/		F: drivers/video/fbdev/sis/
	F: include/video/sisfb.h		F: include/video/sisfb.h

			SIS I2C TOUCHSCREEN DRIVER
			M: Mika Penttilä <mika.penttila@nextfour.com>
			L: linux-input@vger.kernel.org
			S: Maintained
			F: Documentation/devicetree/bindings/input/touchscreen/sis_i2c.txt
			F: drivers/input/touchscreen/sis_i2c.c

	SIS USB2VGA DRIVER		SIS USB2VGA DRIVER
	M: Thomas Winischhofer <thomas@winischhofer.net>		M: Thomas Winischhofer <thomas@winischhofer.net>
	S: Maintained		S: Maintained

drivers/hid/hid-rmi.c

+1 −1

Original line number	Original line	Diff line number	Diff line
	@@ -721,7 +721,7 @@ static int rmi_probe(struct hid_device hdev, const struct hid_device_id id)
	}		}

	if (data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS)		if (data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS)
	rmi_hid_pdata.f30_data.disable = true;		rmi_hid_pdata.gpio_data.disable = true;

	data->xport.dev = hdev->dev.parent;		data->xport.dev = hdev->dev.parent;
	data->xport.pdata = rmi_hid_pdata;		data->xport.pdata = rmi_hid_pdata;