Loading drivers/hid/i2c-hid/Kconfig +4 −2 Original line number Diff line number Diff line Loading @@ -23,12 +23,14 @@ config I2C_HID_ACPI config I2C_HID_OF tristate "HID over I2C transport layer Open Firmware driver" depends on OF # No "depends on OF" because this can also be used for manually # (board-file) instantiated "hid-over-i2c" type i2c-clients. select I2C_HID_CORE help Say Y here if you use a keyboard, a touchpad, a touchscreen, or any other HID based devices which is connected to your computer via I2C. This driver supports Open Firmware (Device Tree)-based systems. This driver supports Open Firmware (Device Tree)-based systems as well as binding to manually (board-file) instantiated i2c-hid-clients. If unsure, say N. Loading drivers/hid/i2c-hid/i2c-hid-of.c +29 −9 Original line number Diff line number Diff line Loading @@ -21,6 +21,7 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/gpio/consumer.h> #include <linux/hid.h> #include <linux/i2c.h> #include <linux/kernel.h> Loading @@ -35,8 +36,10 @@ struct i2c_hid_of { struct i2chid_ops ops; struct i2c_client *client; struct gpio_desc *reset_gpio; struct regulator_bulk_data supplies[2]; int post_power_delay_ms; int post_reset_delay_ms; }; static int i2c_hid_of_power_up(struct i2chid_ops *ops) Loading @@ -55,6 +58,10 @@ static int i2c_hid_of_power_up(struct i2chid_ops *ops) if (ihid_of->post_power_delay_ms) msleep(ihid_of->post_power_delay_ms); gpiod_set_value_cansleep(ihid_of->reset_gpio, 0); if (ihid_of->post_reset_delay_ms) msleep(ihid_of->post_reset_delay_ms); return 0; } Loading @@ -62,6 +69,7 @@ static void i2c_hid_of_power_down(struct i2chid_ops *ops) { struct i2c_hid_of *ihid_of = container_of(ops, struct i2c_hid_of, ops); gpiod_set_value_cansleep(ihid_of->reset_gpio, 1); regulator_bulk_disable(ARRAY_SIZE(ihid_of->supplies), ihid_of->supplies); } Loading @@ -75,33 +83,43 @@ static int i2c_hid_of_probe(struct i2c_client *client) int ret; u32 val; ihid_of = devm_kzalloc(&client->dev, sizeof(*ihid_of), GFP_KERNEL); ihid_of = devm_kzalloc(dev, sizeof(*ihid_of), GFP_KERNEL); if (!ihid_of) return -ENOMEM; ihid_of->ops.power_up = i2c_hid_of_power_up; ihid_of->ops.power_down = i2c_hid_of_power_down; ret = of_property_read_u32(dev->of_node, "hid-descr-addr", &val); ret = device_property_read_u32(dev, "hid-descr-addr", &val); if (ret) { dev_err(&client->dev, "HID register address not provided\n"); dev_err(dev, "HID register address not provided\n"); return -ENODEV; } if (val >> 16) { dev_err(&client->dev, "Bad HID register address: 0x%08x\n", val); dev_err(dev, "Bad HID register address: 0x%08x\n", val); return -EINVAL; } hid_descriptor_address = val; if (!device_property_read_u32(&client->dev, "post-power-on-delay-ms", &val)) if (!device_property_read_u32(dev, "post-power-on-delay-ms", &val)) ihid_of->post_power_delay_ms = val; /* * Note this is a kernel internal device-property set by x86 platform code, * this MUST not be used in devicetree files without first adding it to * the DT bindings. */ if (!device_property_read_u32(dev, "post-reset-deassert-delay-ms", &val)) ihid_of->post_reset_delay_ms = val; /* Start out with reset asserted */ ihid_of->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(ihid_of->reset_gpio)) return PTR_ERR(ihid_of->reset_gpio); ihid_of->supplies[0].supply = "vdd"; ihid_of->supplies[1].supply = "vddl"; ret = devm_regulator_bulk_get(&client->dev, ARRAY_SIZE(ihid_of->supplies), ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ihid_of->supplies), ihid_of->supplies); if (ret) return ret; Loading @@ -116,11 +134,13 @@ static int i2c_hid_of_probe(struct i2c_client *client) hid_descriptor_address, quirks); } #ifdef CONFIG_OF static const struct of_device_id i2c_hid_of_match[] = { { .compatible = "hid-over-i2c" }, {}, }; MODULE_DEVICE_TABLE(of, i2c_hid_of_match); #endif static const struct i2c_device_id i2c_hid_of_id_table[] = { { "hid", 0 }, Loading Loading
drivers/hid/i2c-hid/Kconfig +4 −2 Original line number Diff line number Diff line Loading @@ -23,12 +23,14 @@ config I2C_HID_ACPI config I2C_HID_OF tristate "HID over I2C transport layer Open Firmware driver" depends on OF # No "depends on OF" because this can also be used for manually # (board-file) instantiated "hid-over-i2c" type i2c-clients. select I2C_HID_CORE help Say Y here if you use a keyboard, a touchpad, a touchscreen, or any other HID based devices which is connected to your computer via I2C. This driver supports Open Firmware (Device Tree)-based systems. This driver supports Open Firmware (Device Tree)-based systems as well as binding to manually (board-file) instantiated i2c-hid-clients. If unsure, say N. Loading
drivers/hid/i2c-hid/i2c-hid-of.c +29 −9 Original line number Diff line number Diff line Loading @@ -21,6 +21,7 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/gpio/consumer.h> #include <linux/hid.h> #include <linux/i2c.h> #include <linux/kernel.h> Loading @@ -35,8 +36,10 @@ struct i2c_hid_of { struct i2chid_ops ops; struct i2c_client *client; struct gpio_desc *reset_gpio; struct regulator_bulk_data supplies[2]; int post_power_delay_ms; int post_reset_delay_ms; }; static int i2c_hid_of_power_up(struct i2chid_ops *ops) Loading @@ -55,6 +58,10 @@ static int i2c_hid_of_power_up(struct i2chid_ops *ops) if (ihid_of->post_power_delay_ms) msleep(ihid_of->post_power_delay_ms); gpiod_set_value_cansleep(ihid_of->reset_gpio, 0); if (ihid_of->post_reset_delay_ms) msleep(ihid_of->post_reset_delay_ms); return 0; } Loading @@ -62,6 +69,7 @@ static void i2c_hid_of_power_down(struct i2chid_ops *ops) { struct i2c_hid_of *ihid_of = container_of(ops, struct i2c_hid_of, ops); gpiod_set_value_cansleep(ihid_of->reset_gpio, 1); regulator_bulk_disable(ARRAY_SIZE(ihid_of->supplies), ihid_of->supplies); } Loading @@ -75,33 +83,43 @@ static int i2c_hid_of_probe(struct i2c_client *client) int ret; u32 val; ihid_of = devm_kzalloc(&client->dev, sizeof(*ihid_of), GFP_KERNEL); ihid_of = devm_kzalloc(dev, sizeof(*ihid_of), GFP_KERNEL); if (!ihid_of) return -ENOMEM; ihid_of->ops.power_up = i2c_hid_of_power_up; ihid_of->ops.power_down = i2c_hid_of_power_down; ret = of_property_read_u32(dev->of_node, "hid-descr-addr", &val); ret = device_property_read_u32(dev, "hid-descr-addr", &val); if (ret) { dev_err(&client->dev, "HID register address not provided\n"); dev_err(dev, "HID register address not provided\n"); return -ENODEV; } if (val >> 16) { dev_err(&client->dev, "Bad HID register address: 0x%08x\n", val); dev_err(dev, "Bad HID register address: 0x%08x\n", val); return -EINVAL; } hid_descriptor_address = val; if (!device_property_read_u32(&client->dev, "post-power-on-delay-ms", &val)) if (!device_property_read_u32(dev, "post-power-on-delay-ms", &val)) ihid_of->post_power_delay_ms = val; /* * Note this is a kernel internal device-property set by x86 platform code, * this MUST not be used in devicetree files without first adding it to * the DT bindings. */ if (!device_property_read_u32(dev, "post-reset-deassert-delay-ms", &val)) ihid_of->post_reset_delay_ms = val; /* Start out with reset asserted */ ihid_of->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(ihid_of->reset_gpio)) return PTR_ERR(ihid_of->reset_gpio); ihid_of->supplies[0].supply = "vdd"; ihid_of->supplies[1].supply = "vddl"; ret = devm_regulator_bulk_get(&client->dev, ARRAY_SIZE(ihid_of->supplies), ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ihid_of->supplies), ihid_of->supplies); if (ret) return ret; Loading @@ -116,11 +134,13 @@ static int i2c_hid_of_probe(struct i2c_client *client) hid_descriptor_address, quirks); } #ifdef CONFIG_OF static const struct of_device_id i2c_hid_of_match[] = { { .compatible = "hid-over-i2c" }, {}, }; MODULE_DEVICE_TABLE(of, i2c_hid_of_match); #endif static const struct i2c_device_id i2c_hid_of_id_table[] = { { "hid", 0 }, Loading