Commit b80ba107 authored by Damien Le Moal's avatar Damien Le Moal Committed by huangfangrun
Browse files

spi: dw: Add support for 32-bits max xfer size

mainline inclusion
from mainline-v5.11-rc1
commit a51acc24
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I7BZ1B
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a51acc2400d47df0f



----------------------------------------------------------------------

The Synopsis DesignWare DW_apb_ssi specifications version 3.23 onward
define a 32-bits maximum transfer size synthesis parameter
(SSI_MAX_XFER_SIZE=32) in addition to the legacy 16-bits configuration
(SSI_MAX_XFER_SIZE=16) for SPI controllers. When SSI_MAX_XFER_SIZE=32,
the layout of the ctrlr0 register changes, moving the data frame format
field from bits [3..0] to bits [16..20], and the RX/TX FIFO word size
can be up to 32-bits.

To support this new format, introduce the DW SPI capability flag
DW_SPI_CAP_DFS32 to indicate that a controller is configured with
SSI_MAX_XFER_SIZE=32. Since SSI_MAX_XFER_SIZE is a controller synthesis
parameter not accessible through a register, the detection of this
parameter value is done in spi_hw_init() by writing and reading the
ctrlr0 register and testing the value of bits [3..0]. These bits are
ignored (unchanged) for SSI_MAX_XFER_SIZE=16, allowing the detection.
If a DFS32 capable SPI controller is detected, the new field dfs_offset
in struct dw_spi is set to SPI_DFS32_OFFSET (16).

dw_spi_update_config() is modified to set the data frame size field at
the correct position is the CTRLR0 register, as indicated by the
dfs_offset field of the dw_spi structure.

The DW_SPI_CAP_DFS32 flag is also unconditionally set for SPI slave
controllers, e.g. controllers that have the DW_SPI_CAP_DWC_SSI
capability flag set. However, for these ssi controllers, the dfs_offset
field is set to 0 as before (as per specifications).

Finally, for any controller with the DW_SPI_CAP_DFS32 capability flag
set, dw_spi_add_host() extends the value of bits_per_word_mask from
16-bits to 32-bits. dw_reader() and dw_writer() are also modified to
handle 32-bits iTX/RX FIFO words.

Suggested-by: default avatarSean Anderson <seanga2@gmail.com>
Signed-off-by: default avatarDamien Le Moal <damien.lemoal@wdc.com>
Acked-by: default avatarSerge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20201206011817.11700-3-damien.lemoal@wdc.com


Signed-off-by: default avatarMark Brown <broonie@kernel.org>
Signed-off-by: default avatarhuangfangrun <huangfangrun1@h-partners.com>
parent 92923e10
Loading
Loading
Loading
Loading
+37 −7
Original line number Diff line number Diff line
@@ -137,14 +137,16 @@ static inline u32 rx_max(struct dw_spi *dws)
static void dw_writer(struct dw_spi *dws)
{
	u32 max = tx_max(dws);
	u16 txw = 0;
	u32 txw = 0;

	while (max--) {
		if (dws->tx) {
			if (dws->n_bytes == 1)
				txw = *(u8 *)(dws->tx);
			else
			else if (dws->n_bytes == 2)
				txw = *(u16 *)(dws->tx);
			else
				txw = *(u32 *)(dws->tx);

			dws->tx += dws->n_bytes;
		}
@@ -156,15 +158,17 @@ static void dw_writer(struct dw_spi *dws)
static void dw_reader(struct dw_spi *dws)
{
	u32 max = rx_max(dws);
	u16 rxw;
	u32 rxw;

	while (max--) {
		rxw = dw_read_io_reg(dws, DW_SPI_DR);
		if (dws->rx) {
			if (dws->n_bytes == 1)
				*(u8 *)(dws->rx) = rxw;
			else
			else if (dws->n_bytes == 2)
				*(u16 *)(dws->rx) = rxw;
			else
				*(u32 *)(dws->rx) = rxw;

			dws->rx += dws->n_bytes;
		}
@@ -311,8 +315,8 @@ void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi,
	u32 speed_hz;
	u16 clk_div;

	/* CTRLR0[ 4/3: 0] Data Frame Size */
	cr0 |= (cfg->dfs - 1);
	/* CTRLR0[ 4/3: 0] or CTRLR0[ 20: 16] Data Frame Size */
	cr0 |= (cfg->dfs - 1) << dws->dfs_offset;

	if (!(dws->caps & DW_SPI_CAP_DWC_SSI))
		/* CTRLR0[ 9:8] Transfer Mode */
@@ -828,6 +832,29 @@ static void spi_hw_init(struct device *dev, struct dw_spi *dws)
		dev_dbg(dev, "Detected FIFO size: %u bytes\n", dws->fifo_len);
	}

	/*
	 * Detect CTRLR0.DFS field size and offset by testing the lowest bits
	 * writability. Note DWC SSI controller also has the extended DFS, but
	 * with zero offset.
	 */
	if (!(dws->caps & DW_SPI_CAP_DWC_SSI)) {
		u32 cr0, tmp = dw_readl(dws, DW_SPI_CTRLR0);

		spi_enable_chip(dws, 0);
		dw_writel(dws, DW_SPI_CTRLR0, 0xffffffff);
		cr0 = dw_readl(dws, DW_SPI_CTRLR0);
		dw_writel(dws, DW_SPI_CTRLR0, tmp);
		spi_enable_chip(dws, 1);

		if (!(cr0 & SPI_DFS_MASK)) {
			dws->caps |= DW_SPI_CAP_DFS32;
			dws->dfs_offset = SPI_DFS32_OFFSET;
			dev_dbg(dev, "Detected 32-bits max data frame size\n");
		}
	} else {
		dws->caps |= DW_SPI_CAP_DFS32;
	}

	/* enable HW fixup for explicit CS deselect for Amazon's alpine chip */
	if (dws->caps & DW_SPI_CAP_CS_OVERRIDE)
		dw_writel(dws, DW_SPI_CS_OVERRIDE, 0xF);
@@ -864,6 +891,9 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)

	master->use_gpio_descriptors = true;
	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP;
	if (dws->caps & DW_SPI_CAP_DFS32)
		master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
	else
		master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16);
	master->bus_num = dws->bus_num;
	master->num_chipselect = dws->num_cs;
+5 −0
Original line number Diff line number Diff line
@@ -9,6 +9,7 @@
#include <linux/io.h>
#include <linux/scatterlist.h>
#include <linux/spi/spi-mem.h>
#include <linux/bitfield.h>

/* Register offsets */
#define DW_SPI_CTRLR0			0x00
@@ -41,6 +42,8 @@

/* Bit fields in CTRLR0 */
#define SPI_DFS_OFFSET			0
#define SPI_DFS_MASK			GENMASK(3, 0)
#define SPI_DFS32_OFFSET		16

#define SPI_FRF_OFFSET			4
#define SPI_FRF_SPI			0x0
@@ -121,6 +124,7 @@ enum dw_ssi_type {
#define DW_SPI_CAP_CS_OVERRIDE		BIT(0)
#define DW_SPI_CAP_KEEMBAY_MST		BIT(1)
#define DW_SPI_CAP_DWC_SSI		BIT(2)
#define DW_SPI_CAP_DFS32		BIT(3)

/* Slave spi_transfer/spi_mem_op related */
struct dw_spi_cfg {
@@ -148,6 +152,7 @@ struct dw_spi {
	unsigned long		paddr;
	int			irq;
	u32			fifo_len;	/* depth of the FIFO buffer */
	unsigned int		dfs_offset;     /* CTRLR0 DFS field offset */
	u32			max_mem_freq;	/* max mem-ops bus freq */
	u32			max_freq;	/* max bus freq supported */