Commit b4f6f84d authored by Gu Zitao's avatar Gu Zitao Committed by Zheng Zengkai
Browse files

sw64: tty: add serial driver for sw64 

Sunway inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I4SPZD


CVE: NA

-------------------------------

Signed-off-by: Gu Zitao <guzitao@wxiat.com> #openEuler_contributor
Signed-off-by: default avatarLaibin Qiu <qiulaibin@huawei.com>
Reviewed-by: default avatarHanjun Guo <guohanjun@huawei.com>
Signed-off-by: default avatarZheng Zengkai <zhengzengkai@huawei.com>
parent f904d5ef

drivers/tty/serial/8250/8250_sunway.c

0 → 100644
+785 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0+

/*

 * Synopsys SUNWAY 8250 driver.

 *

 * Copyright 2011 Picochip, Jamie Iles.

 * Copyright 2013 Intel Corporation

 *

 * The Synopsys SUNWAY 8250 has an extra feature whereby it detects if the

 * LCR is written whilst busy.  If it is, then a busy detect interrupt is

 * raised, the LCR needs to be rewritten and the uart status register read.

 */

#include <linux/delay.h>

#include <linux/device.h>

#include <linux/io.h>

#include <linux/module.h>

#include <linux/serial_8250.h>

#include <linux/serial_reg.h>

#include <linux/of.h>

#include <linux/of_irq.h>

#include <linux/of_platform.h>

#include <linux/platform_device.h>

#include <linux/slab.h>

#include <linux/acpi.h>

#include <linux/clk.h>

#include <linux/reset.h>

#include <linux/pm_runtime.h>



#include <asm/byteorder.h>



#include "8250.h"



/* Offsets for the DesignWare specific registers */

#define SUNWAY_UART_USR	0x1f /* UART Status Register */

#define SUNWAY_UART_DLF	0xc0 /* Divisor Latch Fraction Register */

#define SUNWAY_UART_CPR	0xf4 /* Component Parameter Register */

#define SUNWAY_UART_UCV	0xf8 /* UART Component Version */



/* Component Parameter Register bits */

#define SUNWAY_UART_CPR_ABP_DATA_WIDTH	(3 << 0)

#define SUNWAY_UART_CPR_AFCE_MODE		(1 << 4)

#define SUNWAY_UART_CPR_THRE_MODE		(1 << 5)

#define SUNWAY_UART_CPR_SIR_MODE		(1 << 6)

#define SUNWAY_UART_CPR_SIR_LP_MODE		(1 << 7)

#define SUNWAY_UART_CPR_ADDITIONAL_FEATURES	(1 << 8)

#define SUNWAY_UART_CPR_FIFO_ACCESS		(1 << 9)

#define SUNWAY_UART_CPR_FIFO_STAT		(1 << 10)

#define SUNWAY_UART_CPR_SHADOW		(1 << 11)

#define SUNWAY_UART_CPR_ENCODED_PARMS	(1 << 12)

#define SUNWAY_UART_CPR_DMA_EXTRA		(1 << 13)

#define SUNWAY_UART_CPR_FIFO_MODE		(0xff << 16)

/* Helper for fifo size calculation */

#define SUNWAY_UART_CPR_FIFO_SIZE(a)	(((a >> 16) & 0xff) * 16)



/* DesignWare specific register fields */

#define SUNWAY_UART_MCR_SIRE		BIT(6)



struct sunway8250_data {

	u8			usr_reg;

	u8			dlf_size;

	int			line;

	int			msr_mask_on;

	int			msr_mask_off;

	struct clk		*clk;

	struct clk		*pclk;

	struct reset_control	*rst;

	struct uart_8250_dma	dma;



	unsigned int		skip_autocfg:1;

	unsigned int		uart_16550_compatible:1;

};



static inline u32 sunway8250_readl_ext(struct uart_port *p, int offset)

{

	if (p->iotype == UPIO_MEM32BE)

		return ioread32be(p->membase + offset);

	return readl(p->membase + offset);

}



static inline void sunway8250_writel_ext(struct uart_port *p, int offset, u32 reg)

{

	if (p->iotype == UPIO_MEM32BE)

		iowrite32be(reg, p->membase + offset);

	else

		writel(reg, p->membase + offset);

}



static inline int sunway8250_modify_msr(struct uart_port *p, int offset, int value)

{

	struct sunway8250_data *d = p->private_data;



	/* Override any modem control signals if needed */

	if (offset == UART_MSR) {

		value |= d->msr_mask_on;

		value &= ~d->msr_mask_off;

	}



	return value;

}



static void sunway8250_force_idle(struct uart_port *p)

{

	struct uart_8250_port *up = up_to_u8250p(p);



	serial8250_clear_and_reinit_fifos(up);

	(void)p->serial_in(p, UART_RX);

}



static void sunway8250_check_lcr(struct uart_port *p, int value)

{

	void __iomem *offset = p->membase + (UART_LCR << p->regshift);

	int tries = 1000;



	/* Make sure LCR write wasn't ignored */

	while (tries--) {

		unsigned int lcr = p->serial_in(p, UART_LCR);



		if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))

			return;



		sunway8250_force_idle(p);



#ifdef CONFIG_64BIT

		if (p->type == PORT_OCTEON)

			__raw_writeq(value & 0xff, offset);

		else

#endif

		if (p->iotype == UPIO_MEM32)

			writel(value, offset);

		else if (p->iotype == UPIO_MEM32BE)

			iowrite32be(value, offset);

		else

			writeb(value, offset);

	}

	/*

	 * FIXME: this deadlocks if port->lock is already held

	 * dev_err(p->dev, "Couldn't set LCR to %d\n", value);

	 */

}



/* Returns once the transmitter is empty or we run out of retries */

static void sunway8250_tx_wait_empty(struct uart_port *p)

{

	unsigned int tries = 20000;

	unsigned int delay_threshold = tries - 1000;

	unsigned int lsr;



	while (tries--) {

		lsr = readb(p->membase + (UART_LSR << p->regshift));

		if (lsr & UART_LSR_TEMT)

			break;



		/*

		 * The device is first given a chance to empty without delay,

		 * to avoid slowdowns at high bitrates. If after 1000 tries

		 * the buffer has still not emptied, allow more time for low-

		 * speed links.

		 */

		if (tries < delay_threshold)

			udelay(1);

	}

}



static void sunway8250_serial_out38x(struct uart_port *p, int offset, int value)

{

	struct sunway8250_data *d = p->private_data;



	/* Allow the TX to drain before we reconfigure */

	if (offset == UART_LCR)

		sunway8250_tx_wait_empty(p);



	writeb(value, p->membase + (offset << p->regshift));



	if (offset == UART_LCR && !d->uart_16550_compatible)

		sunway8250_check_lcr(p, value);

}





static void sunway8250_serial_out(struct uart_port *p, int offset, int value)

{

	struct sunway8250_data *d = p->private_data;



	writeb(value, p->membase + (offset << p->regshift));



	if (offset == UART_LCR && !d->uart_16550_compatible)

		sunway8250_check_lcr(p, value);

}



static unsigned int sunway8250_serial_in(struct uart_port *p, int offset)

{

	unsigned int value = readb(p->membase + (offset << p->regshift));



	return sunway8250_modify_msr(p, offset, value);

}



#ifdef CONFIG_64BIT

static unsigned int sunway8250_serial_inq(struct uart_port *p, int offset)

{

	unsigned int value;



	value = (u8)__raw_readq(p->membase + (offset << p->regshift));



	return sunway8250_modify_msr(p, offset, value);

}



static void sunway8250_serial_outq(struct uart_port *p, int offset, int value)

{

	struct sunway8250_data *d = p->private_data;



	value &= 0xff;

	__raw_writeq(value, p->membase + (offset << p->regshift));

	/* Read back to ensure register write ordering. */

	__raw_readq(p->membase + (UART_LCR << p->regshift));



	if (offset == UART_LCR && !d->uart_16550_compatible)

		sunway8250_check_lcr(p, value);

}

#endif /* CONFIG_64BIT */



static void sunway8250_serial_out32(struct uart_port *p, int offset, int value)

{

	struct sunway8250_data *d = p->private_data;



	writel(value, p->membase + (offset << p->regshift));



	if (offset == UART_LCR && !d->uart_16550_compatible)

		sunway8250_check_lcr(p, value);

}



static unsigned int sunway8250_serial_in32(struct uart_port *p, int offset)

{

	unsigned int value = readl(p->membase + (offset << p->regshift));



	return sunway8250_modify_msr(p, offset, value);

}



static void sunway8250_serial_out32be(struct uart_port *p, int offset, int value)

{

	struct sunway8250_data *d = p->private_data;



	iowrite32be(value, p->membase + (offset << p->regshift));



	if (offset == UART_LCR && !d->uart_16550_compatible)

		sunway8250_check_lcr(p, value);

}



static unsigned int sunway8250_serial_in32be(struct uart_port *p, int offset)

{

	unsigned int value = ioread32be(p->membase + (offset << p->regshift));



	return sunway8250_modify_msr(p, offset, value);

}





static int sunway8250_handle_irq(struct uart_port *p)

{

	struct uart_8250_port *up = up_to_u8250p(p);

	struct sunway8250_data *d = p->private_data;

	unsigned int iir = p->serial_in(p, UART_IIR);

	unsigned int status;

	unsigned long flags;



	/*

	 * There are ways to get Designware-based UARTs into a state where

	 * they are asserting UART_IIR_RX_TIMEOUT but there is no actual

	 * data available.  If we see such a case then we'll do a bogus

	 * read.  If we don't do this then the "RX TIMEOUT" interrupt will

	 * fire forever.

	 *

	 * This problem has only been observed so far when not in DMA mode

	 * so we limit the workaround only to non-DMA mode.

	 */

	if (!up->dma && ((iir & 0x3f) == UART_IIR_RX_TIMEOUT)) {

		spin_lock_irqsave(&p->lock, flags);

		status = p->serial_in(p, UART_LSR);



		if (!(status & (UART_LSR_DR | UART_LSR_BI)))

			(void) p->serial_in(p, UART_RX);



		spin_unlock_irqrestore(&p->lock, flags);

	}



	if (serial8250_handle_irq(p, iir))

		return 1;



	if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {

		/* Clear the USR */

		(void)p->serial_in(p, d->usr_reg);



		return 1;

	}



	return 0;

}



static void

sunway8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old)

{

	if (!state)

		pm_runtime_get_sync(port->dev);



	serial8250_do_pm(port, state, old);



	if (state)

		pm_runtime_put_sync_suspend(port->dev);

}



static void sunway8250_set_termios(struct uart_port *p, struct ktermios *termios,

			       struct ktermios *old)

{

	unsigned int baud = tty_termios_baud_rate(termios);

	struct sunway8250_data *d = p->private_data;

	long rate;

	int ret;



	if (IS_ERR(d->clk))

		goto out;



	clk_disable_unprepare(d->clk);

	rate = clk_round_rate(d->clk, baud * 16);

	if (rate < 0)

		ret = rate;

	else if (rate == 0)

		ret = -ENOENT;

	else

		ret = clk_set_rate(d->clk, rate);

	clk_prepare_enable(d->clk);



	if (!ret)

		p->uartclk = rate;



out:

	p->status &= ~UPSTAT_AUTOCTS;

	if (termios->c_cflag & CRTSCTS)

		p->status |= UPSTAT_AUTOCTS;



	serial8250_do_set_termios(p, termios, old);

}



static void sunway8250_set_ldisc(struct uart_port *p, struct ktermios *termios)

{

	struct uart_8250_port *up = up_to_u8250p(p);

	unsigned int mcr = p->serial_in(p, UART_MCR);



	if (up->capabilities & UART_CAP_IRDA) {

		if (termios->c_line == N_IRDA)

			mcr |= SUNWAY_UART_MCR_SIRE;

		else

			mcr &= ~SUNWAY_UART_MCR_SIRE;



		p->serial_out(p, UART_MCR, mcr);

	}

	serial8250_do_set_ldisc(p, termios);

}



/*

 * sunway8250_fallback_dma_filter will prevent the UART from getting just any free

 * channel on platforms that have DMA engines, but don't have any channels

 * assigned to the UART.

 *

 * REVISIT: This is a work around for limitation in the DMA Engine API. Once the

 * core problem is fixed, this function is no longer needed.

 */

static bool sunway8250_fallback_dma_filter(struct dma_chan *chan, void *param)

{

	return false;

}



static bool sunway8250_idma_filter(struct dma_chan *chan, void *param)

{

	return param == chan->device->dev;

}



/*

 * divisor = div(I) + div(F)

 * "I" means integer, "F" means fractional

 * quot = div(I) = clk / (16 * baud)

 * frac = div(F) * 2^dlf_size

 *

 * let rem = clk % (16 * baud)

 * we have: div(F) * (16 * baud) = rem

 * so frac = 2^dlf_size * rem / (16 * baud) = (rem << dlf_size) / (16 * baud)

 */

static unsigned int sunway8250_get_divisor(struct uart_port *p,

				       unsigned int baud,

				       unsigned int *frac)

{

	unsigned int quot, rem, base_baud = baud * 16;

	struct sunway8250_data *d = p->private_data;



	quot = p->uartclk / base_baud;

	rem = p->uartclk % base_baud;

	*frac = DIV_ROUND_CLOSEST(rem << d->dlf_size, base_baud);



	return quot;

}



static void sunway8250_set_divisor(struct uart_port *p, unsigned int baud,

			       unsigned int quot, unsigned int quot_frac)

{

	sunway8250_writel_ext(p, SUNWAY_UART_DLF, quot_frac);

	serial8250_do_set_divisor(p, baud, quot, quot_frac);

}



static void sunway8250_quirks(struct uart_port *p, struct sunway8250_data *data)

{

	if (p->dev->of_node) {

		struct device_node *np = p->dev->of_node;

		int id;



		/* get index of serial line, if found in DT aliases */

		id = of_alias_get_id(np, "serial");

		if (id >= 0)

			p->line = id;

#ifdef CONFIG_64BIT

		if (of_device_is_compatible(np, "cavium,octeon-3860-uart")) {

			p->serial_in = sunway8250_serial_inq;

			p->serial_out = sunway8250_serial_outq;

			p->flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;

			p->type = PORT_OCTEON;

			data->usr_reg = 0x27;

			data->skip_autocfg = true;

		}

#endif

		if (of_device_is_big_endian(p->dev->of_node)) {

			p->iotype = UPIO_MEM32BE;

			p->serial_in = sunway8250_serial_in32be;

			p->serial_out = sunway8250_serial_out32be;

		}

		if (of_device_is_compatible(np, "marvell,armada-38x-uart"))

			p->serial_out = sunway8250_serial_out38x;



	} else if (acpi_dev_present("APMC0D08", NULL, -1)) {

		p->iotype = UPIO_MEM32;

		p->regshift = 2;

		p->serial_in = sunway8250_serial_in32;

		data->uart_16550_compatible = true;

	}



	/* Platforms with iDMA 64-bit */

	if (platform_get_resource_byname(to_platform_device(p->dev),

					 IORESOURCE_MEM, "lpss_priv")) {

		data->dma.rx_param = p->dev->parent;

		data->dma.tx_param = p->dev->parent;

		data->dma.fn = sunway8250_idma_filter;

	}

}



static void sunway8250_setup_port(struct uart_port *p)

{

	struct uart_8250_port *up = up_to_u8250p(p);

	u32 reg;



	/*

	 * If the Component Version Register returns zero, we know that

	 * ADDITIONAL_FEATURES are not enabled. No need to go any further.

	 */

	reg = sunway8250_readl_ext(p, SUNWAY_UART_UCV);

	if (!reg)

		return;



	dev_dbg(p->dev, "Designware UART version %c.%c%c\n",

		(reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff);



	sunway8250_writel_ext(p, SUNWAY_UART_DLF, ~0U);

	reg = sunway8250_readl_ext(p, SUNWAY_UART_DLF);

	sunway8250_writel_ext(p, SUNWAY_UART_DLF, 0);



	if (reg) {

		struct sunway8250_data *d = p->private_data;



		d->dlf_size = fls(reg);

		p->get_divisor = sunway8250_get_divisor;

		p->set_divisor = sunway8250_set_divisor;

	}



	reg = sunway8250_readl_ext(p, SUNWAY_UART_CPR);

	if (!reg)

		return;



	/* Select the type based on fifo */

	if (reg & SUNWAY_UART_CPR_FIFO_MODE) {

		p->type = PORT_16550A;

		p->flags |= UPF_FIXED_TYPE;

		p->fifosize = SUNWAY_UART_CPR_FIFO_SIZE(reg);

		up->capabilities = UART_CAP_FIFO;

	}



	if (reg & SUNWAY_UART_CPR_AFCE_MODE)

		up->capabilities |= UART_CAP_AFE;



	if (reg & SUNWAY_UART_CPR_SIR_MODE)

		up->capabilities |= UART_CAP_IRDA;

}



static int sunway8250_probe(struct platform_device *pdev)

{

	struct uart_8250_port uart = {};

	struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);

	int irq = platform_get_irq(pdev, 0);

	struct uart_port *p = &uart.port;

	struct device *dev = &pdev->dev;

	struct sunway8250_data *data;

	int err;

	u32 val;



	if (!regs) {

		dev_err(dev, "no registers defined\n");

		return -EINVAL;

	}



	if (irq < 0) {

		if (irq != -EPROBE_DEFER)

			dev_err(dev, "cannot get irq\n");

		irq = 0; // Set serial poll mode

	}



	spin_lock_init(&p->lock);

	p->mapbase	= regs->start;

	p->irq		= irq;

	p->handle_irq	= sunway8250_handle_irq;

	p->pm		= sunway8250_do_pm;

	p->type		= PORT_8250;

	p->flags	= UPF_SHARE_IRQ | UPF_FIXED_PORT;

	p->dev		= dev;

	p->iotype	= UPIO_MEM;

	p->serial_in	= sunway8250_serial_in;

	p->serial_out	= sunway8250_serial_out;

	p->set_ldisc	= sunway8250_set_ldisc;

	p->set_termios	= sunway8250_set_termios;



	p->membase = devm_ioremap(dev, regs->start, resource_size(regs));

	if (!p->membase)

		return -ENOMEM;



	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);

	if (!data)

		return -ENOMEM;



	data->dma.fn = sunway8250_fallback_dma_filter;

	data->usr_reg = SUNWAY_UART_USR;

	p->private_data = data;



	data->uart_16550_compatible = device_property_read_bool(dev,

						"snps,uart-16550-compatible");



	err = device_property_read_u32(dev, "reg-shift", &val);

	if (!err)

		p->regshift = val;



	err = device_property_read_u32(dev, "reg-io-width", &val);

	if (!err && val == 4) {

		p->iotype = UPIO_MEM32;

		p->serial_in = sunway8250_serial_in32;

		p->serial_out = sunway8250_serial_out32;

	}



	if (device_property_read_bool(dev, "dcd-override")) {

		/* Always report DCD as active */

		data->msr_mask_on |= UART_MSR_DCD;

		data->msr_mask_off |= UART_MSR_DDCD;

	}



	if (device_property_read_bool(dev, "dsr-override")) {

		/* Always report DSR as active */

		data->msr_mask_on |= UART_MSR_DSR;

		data->msr_mask_off |= UART_MSR_DDSR;

	}



	if (device_property_read_bool(dev, "cts-override")) {

		/* Always report CTS as active */

		data->msr_mask_on |= UART_MSR_CTS;

		data->msr_mask_off |= UART_MSR_DCTS;

	}



	if (device_property_read_bool(dev, "ri-override")) {

		/* Always report Ring indicator as inactive */

		data->msr_mask_off |= UART_MSR_RI;

		data->msr_mask_off |= UART_MSR_TERI;

	}



	/* Always ask for fixed clock rate from a property. */

	device_property_read_u32(dev, "clock-frequency", &p->uartclk);



	/* If there is separate baudclk, get the rate from it. */

	data->clk = devm_clk_get(dev, "baudclk");

	if (IS_ERR(data->clk) && PTR_ERR(data->clk) != -EPROBE_DEFER)

		data->clk = devm_clk_get(dev, NULL);

	if (IS_ERR(data->clk) && PTR_ERR(data->clk) == -EPROBE_DEFER)

		return -EPROBE_DEFER;

	if (!IS_ERR_OR_NULL(data->clk)) {

		err = clk_prepare_enable(data->clk);

		if (err)

			dev_warn(dev, "could not enable optional baudclk: %d\n",

				 err);

		else

			p->uartclk = clk_get_rate(data->clk);

	}



	/* If no clock rate is defined, fail. */

	if (!p->uartclk) {

		dev_err(dev, "clock rate not defined\n");

		err = -EINVAL;

		goto err_clk;

	}



	data->pclk = devm_clk_get(dev, "apb_pclk");

	if (IS_ERR(data->pclk) && PTR_ERR(data->pclk) == -EPROBE_DEFER) {

		err = -EPROBE_DEFER;

		goto err_clk;

	}

	if (!IS_ERR(data->pclk)) {

		err = clk_prepare_enable(data->pclk);

		if (err) {

			dev_err(dev, "could not enable apb_pclk\n");

			goto err_clk;

		}

	}



	data->rst = devm_reset_control_get_optional_exclusive(dev, NULL);

	if (IS_ERR(data->rst)) {

		err = PTR_ERR(data->rst);

		goto err_pclk;

	}

	reset_control_deassert(data->rst);



	sunway8250_quirks(p, data);



	/* If the Busy Functionality is not implemented, don't handle it */

	if (data->uart_16550_compatible)

		p->handle_irq = NULL;



	if (!data->skip_autocfg)

		sunway8250_setup_port(p);



	/* If we have a valid fifosize, try hooking up DMA */

	if (p->fifosize) {

		data->dma.rxconf.src_maxburst = p->fifosize / 4;

		data->dma.txconf.dst_maxburst = p->fifosize / 4;

		uart.dma = &data->dma;

	}



	data->line = serial8250_register_8250_port(&uart);

	if (data->line < 0) {

		err = data->line;

		goto err_reset;

	}



	platform_set_drvdata(pdev, data);



	pm_runtime_set_active(dev);

	pm_runtime_enable(dev);



	return 0;



err_reset:

	reset_control_assert(data->rst);



err_pclk:

	if (!IS_ERR(data->pclk))

		clk_disable_unprepare(data->pclk);



err_clk:

	if (!IS_ERR(data->clk))

		clk_disable_unprepare(data->clk);



	return err;

}



static int sunway8250_remove(struct platform_device *pdev)

{

	struct sunway8250_data *data = platform_get_drvdata(pdev);



	pm_runtime_get_sync(&pdev->dev);



	serial8250_unregister_port(data->line);



	reset_control_assert(data->rst);



	if (!IS_ERR(data->pclk))

		clk_disable_unprepare(data->pclk);



	if (!IS_ERR(data->clk))

		clk_disable_unprepare(data->clk);



	pm_runtime_disable(&pdev->dev);

	pm_runtime_put_noidle(&pdev->dev);



	return 0;

}



#ifdef CONFIG_PM_SLEEP

static int sunway8250_suspend(struct device *dev)

{

	struct sunway8250_data *data = dev_get_drvdata(dev);



	serial8250_suspend_port(data->line);



	return 0;

}



static int sunway8250_resume(struct device *dev)

{

	struct sunway8250_data *data = dev_get_drvdata(dev);



	serial8250_resume_port(data->line);



	return 0;

}

#endif /* CONFIG_PM_SLEEP */



#ifdef CONFIG_PM

static int sunway8250_runtime_suspend(struct device *dev)

{

	struct sunway8250_data *data = dev_get_drvdata(dev);



	if (!IS_ERR(data->clk))

		clk_disable_unprepare(data->clk);



	if (!IS_ERR(data->pclk))

		clk_disable_unprepare(data->pclk);



	return 0;

}



static int sunway8250_runtime_resume(struct device *dev)

{

	struct sunway8250_data *data = dev_get_drvdata(dev);



	if (!IS_ERR(data->pclk))

		clk_prepare_enable(data->pclk);



	if (!IS_ERR(data->clk))

		clk_prepare_enable(data->clk);



	return 0;

}

#endif



static const struct dev_pm_ops sunway8250_pm_ops = {

	SET_SYSTEM_SLEEP_PM_OPS(sunway8250_suspend, sunway8250_resume)

	SET_RUNTIME_PM_OPS(sunway8250_runtime_suspend, sunway8250_runtime_resume, NULL)

};



static const struct of_device_id sunway8250_of_match[] = {

	{ .compatible = "sw6,sunway-apb-uart" },

	{ .compatible = "cavium,octeon-3860-uart" },

	{ .compatible = "marvell,armada-38x-uart" },

	{ .compatible = "renesas,rzn1-uart" },

	{ /* Sentinel */ }

};

MODULE_DEVICE_TABLE(of, sunway8250_of_match);



static const struct acpi_device_id sunway8250_acpi_match[] = {

	{ "INT33C4", 0 },

	{ "INT33C5", 0 },

	{ "INT3434", 0 },

	{ "INT3435", 0 },

	{ "80860F0A", 0 },

	{ "8086228A", 0 },

	{ "APMC0D08", 0},

	{ "AMD0020", 0 },

	{ "AMDI0020", 0 },

	{ "BRCM2032", 0 },

	{ "HISI0031", 0 },

	{ },

};

MODULE_DEVICE_TABLE(acpi, sunway8250_acpi_match);



static struct platform_driver sunway8250_platform_driver = {

	.driver = {

		.name		= "sunway-apb-uart",

		.pm		= &sunway8250_pm_ops,

		.of_match_table	= sunway8250_of_match,

		.acpi_match_table = ACPI_PTR(sunway8250_acpi_match),

	},

	.probe			= sunway8250_probe,

	.remove			= sunway8250_remove,

};



module_platform_driver(sunway8250_platform_driver);



MODULE_AUTHOR("Jamie Iles");

MODULE_LICENSE("GPL");

MODULE_DESCRIPTION("Synopsys DesignWare 8250 serial port driver");

MODULE_ALIAS("platform:sunway-apb-uart");

drivers/tty/serial/8250/Kconfig

+7 −0
Original line number Diff line number Diff line
@@ -374,6 +374,13 @@ config SERIAL_8250_DW 
	  Selecting this option will enable handling of the extra features

	  present in the Synopsys DesignWare APB UART.



config SERIAL_8250_SUNWAY

	tristate "Support for SW6B Builtin Synopsys DesignWare 8250 quirks"

	depends on SERIAL_8250 && SW64

	help

	  Selecting this option will enable handling of the extra features

	  present in the Synopsys DesignWare APB UART of SW6.



config SERIAL_8250_EM

	tristate "Support for Emma Mobile integrated serial port"

	depends on SERIAL_8250 && ARM && HAVE_CLK

drivers/tty/serial/8250/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -27,6 +27,7 @@ obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o 
obj-$(CONFIG_SERIAL_8250_FSL)		+= 8250_fsl.o

obj-$(CONFIG_SERIAL_8250_MEN_MCB)	+= 8250_men_mcb.o

obj-$(CONFIG_SERIAL_8250_DW)		+= 8250_dw.o

obj-$(CONFIG_SERIAL_8250_SUNWAY)	+= 8250_sunway.o

obj-$(CONFIG_SERIAL_8250_EM)		+= 8250_em.o

obj-$(CONFIG_SERIAL_8250_IOC3)		+= 8250_ioc3.o

obj-$(CONFIG_SERIAL_8250_OMAP)		+= 8250_omap.o