Commit b124c8bd authored by Andy Shevchenko's avatar Andy Shevchenko Committed by Linus Walleij
Browse files

pinctrl: Sort Kconfig and Makefile entries alphabetically 



Sort Kconfig and Makefile entries alphabetically for better maintenance
in the future.

While at it fix some style issues, such as:
  - "Say Y"/"Say yes"/"Say Yes" --> "Say Y"
  - "pullup/pulldown" --> "pull-up and pull-down"
  - wrong indentation

Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211209113456.33977-1-andriy.shevchenko@linux.intel.com


Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 12422af8

drivers/pinctrl/Kconfig

+234 −235
Original line number Diff line number Diff line
@@ -31,6 +31,24 @@ config DEBUG_PINCTRL 
	help

	  Say Y here to add some extra checks and diagnostics to PINCTRL calls.



config PINCTRL_AMD

	tristate "AMD GPIO pin control"

	depends on HAS_IOMEM

	depends on ACPI || COMPILE_TEST

	select GPIOLIB

	select GPIOLIB_IRQCHIP

	select PINMUX

	select PINCONF

	select GENERIC_PINCONF

	help

	  The driver for memory mapped GPIO functionality on AMD platforms

	  (x86 or arm). Most of the pins are usually muxed to some other

	  functionality by firmware, so only a small amount is available

	  for GPIO use.



	  Requires ACPI/FDT device enumeration code to set up a platform

	  device.



config PINCTRL_APPLE_GPIO

	tristate "Apple SoC GPIO pin controller driver"

	depends on ARCH_APPLE
@@ -69,20 +87,6 @@ config PINCTRL_AS3722 
	  open drain configuration for the GPIO pins of AS3722 devices. It also

	  supports the GPIO functionality through gpiolib.



config PINCTRL_AXP209

	tristate "X-Powers AXP209 PMIC pinctrl and GPIO Support"

	depends on MFD_AXP20X

	depends on OF

	select PINMUX

	select GENERIC_PINCONF

	select GPIOLIB

	help

	  AXP PMICs provides multiple GPIOs that can be muxed for different

	  functions. This driver bundles a pinctrl driver to select the function

	  muxing and a GPIO driver to handle the GPIO when the GPIO function is

	  selected.

	  Say yes to enable pinctrl and GPIO support for the AXP209 PMIC



config PINCTRL_AT91

	bool "AT91 pinctrl driver"

	depends on OF
@@ -109,23 +113,19 @@ config PINCTRL_AT91PIO4 
	  Say Y here to enable the at91 pinctrl/gpio driver for Atmel PIO4

	  controller available on sama5d2 SoC.



config PINCTRL_AMD

	tristate "AMD GPIO pin control"

	depends on HAS_IOMEM

	depends on ACPI || COMPILE_TEST

	select GPIOLIB

	select GPIOLIB_IRQCHIP

config PINCTRL_AXP209

	tristate "X-Powers AXP209 PMIC pinctrl and GPIO Support"

	depends on MFD_AXP20X

	depends on OF

	select PINMUX

	select PINCONF

	select GENERIC_PINCONF

	select GPIOLIB

	help

	  driver for memory mapped GPIO functionality on AMD platforms

	  (x86 or arm).Most pins are usually muxed to some other

	  functionality by firmware,so only a small amount is available

	  for gpio use.



	  Requires ACPI/FDT device enumeration code to set up a platform

	  device.

	  AXP PMICs provides multiple GPIOs that can be muxed for different

	  functions. This driver bundles a pinctrl driver to select the function

	  muxing and a GPIO driver to handle the GPIO when the GPIO function is

	  selected.

	  Say Y to enable pinctrl and GPIO support for the AXP209 PMIC.



config PINCTRL_BM1880

	bool "Bitmain BM1880 Pinctrl driver"
@@ -136,13 +136,13 @@ config PINCTRL_BM1880 
	  Pinctrl driver for Bitmain BM1880 SoC.



config PINCTRL_DA850_PUPD

	tristate "TI DA850/OMAP-L138/AM18XX pullup/pulldown groups"

	tristate "TI DA850/OMAP-L138/AM18XX pull-up and pull-down groups"

	depends on OF && (ARCH_DAVINCI_DA850 || COMPILE_TEST)

	select PINCONF

	select GENERIC_PINCONF

	help

	  Driver for TI DA850/OMAP-L138/AM18XX pinconf. Used to control

	  pullup/pulldown pin groups.

	  pull-up and pull-down pin groups.



config PINCTRL_DA9062

	tristate "Dialog Semiconductor DA9062 PMIC pinctrl and GPIO Support"
@@ -154,7 +154,7 @@ config PINCTRL_DA9062 
	  function muxing and a GPIO driver to handle the GPIO when the GPIO

	  function is selected.



	  Say yes to enable pinctrl and GPIO support for the DA9062 PMIC.

	  Say Y to enable pinctrl and GPIO support for the DA9062 PMIC.



config PINCTRL_DIGICOLOR

	bool
@@ -162,12 +162,93 @@ config PINCTRL_DIGICOLOR 
	select PINMUX

	select GENERIC_PINCONF



config PINCTRL_EQUILIBRIUM

	tristate "Generic pinctrl and GPIO driver for Intel Lightning Mountain SoC"

	depends on OF && HAS_IOMEM

	depends on X86 || COMPILE_TEST

	select PINMUX

	select PINCONF

	select GPIOLIB

	select GPIO_GENERIC

	select GPIOLIB_IRQCHIP

	select GENERIC_PINCONF

	select GENERIC_PINCTRL_GROUPS

	select GENERIC_PINMUX_FUNCTIONS

	help

	  Equilibrium driver is a pinctrl and GPIO driver for Intel Lightning

	  Mountain network processor SoC that supports both the GPIO and pin

	  control frameworks. It provides interfaces to setup pin muxing, assign

	  desired pin functions, configure GPIO attributes for LGM SoC pins.

	  Pin muxing and pin config settings are retrieved from device tree.



config PINCTRL_GEMINI

	bool

	depends on ARCH_GEMINI

	default ARCH_GEMINI

	select PINMUX

	select GENERIC_PINCONF

	select MFD_SYSCON



config PINCTRL_INGENIC

	bool "Pinctrl driver for the Ingenic JZ47xx SoCs"

	default MACH_INGENIC

	depends on OF

	depends on MIPS || COMPILE_TEST

	select GENERIC_PINCONF

	select GENERIC_PINCTRL_GROUPS

	select GENERIC_PINMUX_FUNCTIONS

	select GPIOLIB

	select GPIOLIB_IRQCHIP

	select REGMAP_MMIO



config PINCTRL_K210

	bool "Pinctrl driver for the Canaan Kendryte K210 SoC"

	depends on RISCV && SOC_CANAAN && OF

	select GENERIC_PINMUX_FUNCTIONS

	select GENERIC_PINCONF

	select GPIOLIB

	select OF_GPIO

	select REGMAP_MMIO

	default SOC_CANAAN

	help

	  Add support for the Canaan Kendryte K210 RISC-V SOC Field

	  Programmable IO Array (FPIOA) controller.



config PINCTRL_KEEMBAY

	tristate "Pinctrl driver for Intel Keem Bay SoC"

	depends on ARCH_KEEMBAY || (ARM64 && COMPILE_TEST)

	depends on HAS_IOMEM

	select PINMUX

	select PINCONF

	select GENERIC_PINCONF

	select GENERIC_PINCTRL_GROUPS

	select GENERIC_PINMUX_FUNCTIONS

	select GPIOLIB

	select GPIOLIB_IRQCHIP

	select GPIO_GENERIC

	help

	  This selects pin control driver for the Intel Keem Bay SoC.

	  It provides pin config functions such as pull-up, pull-down,

	  interrupt, drive strength, sec lock, Schmitt trigger, slew

	  rate control and direction control. This module will be

	  called as pinctrl-keembay.



config PINCTRL_LANTIQ

	bool

	depends on LANTIQ

	select PINMUX

	select PINCONF



config PINCTRL_FALCON

	bool

	depends on SOC_FALCON

	depends on PINCTRL_LANTIQ



config PINCTRL_XWAY

	bool

	depends on SOC_TYPE_XWAY

	depends on PINCTRL_LANTIQ



config PINCTRL_LPC18XX

	bool "NXP LPC18XX/43XX SCU pinctrl driver"

	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
@@ -177,18 +258,16 @@ config PINCTRL_LPC18XX 
	help

	  Pinctrl driver for NXP LPC18xx/43xx System Control Unit (SCU).



config PINCTRL_FALCON

	bool

	depends on SOC_FALCON

	depends on PINCTRL_LANTIQ



config PINCTRL_GEMINI

	bool

	depends on ARCH_GEMINI

	default ARCH_GEMINI

config PINCTRL_MAX77620

	tristate "MAX77620/MAX20024 Pincontrol support"

	depends on MFD_MAX77620 && OF

	select PINMUX

	select GENERIC_PINCONF

	select MFD_SYSCON

	help

	  Say Y here to enable Pin control support for Maxim MAX77620 PMIC.

	  This PMIC has 8 GPIO pins that work as GPIO as well as special

	  function in alternate mode. This driver also configure push-pull,

	  open drain, FPS slots etc.



config PINCTRL_MCP23S08_I2C

	tristate
@@ -212,99 +291,47 @@ config PINCTRL_MCP23S08 
	  This provides a GPIO interface supporting inputs and outputs and a

	  corresponding interrupt-controller.



config PINCTRL_OXNAS

	bool

config PINCTRL_MICROCHIP_SGPIO

	bool "Pinctrl driver for Microsemi/Microchip Serial GPIO"

	depends on OF

	select PINMUX

	select PINCONF

	select GENERIC_PINCONF

	depends on HAS_IOMEM

	select GPIOLIB

	select OF_GPIO

	select GPIOLIB_IRQCHIP

	select MFD_SYSCON



config PINCTRL_ROCKCHIP

	tristate "Rockchip gpio and pinctrl driver"

	depends on ARCH_ROCKCHIP || COMPILE_TEST

	depends on OF

	select GPIOLIB

	select PINMUX

	select GENERIC_PINCONF

	select GENERIC_IRQ_CHIP

	select MFD_SYSCON

	select GENERIC_PINCTRL_GROUPS

	select GENERIC_PINMUX_FUNCTIONS

	select OF_GPIO

	default ARCH_ROCKCHIP

	help

          This support pinctrl and gpio driver for Rockchip SoCs.

	  Support for the serial GPIO interface used on Microsemi and

	  Microchip SoCs. By using a serial interface, the SIO

	  controller significantly extends the number of available

	  GPIOs with a minimum number of additional pins on the

	  device. The primary purpose of the SIO controller is to

	  connect control signals from SFP modules and to act as an

	  LED controller.



config PINCTRL_SINGLE

	tristate "One-register-per-pin type device tree based pinctrl driver"

config PINCTRL_OCELOT

	bool "Pinctrl driver for the Microsemi Ocelot and Jaguar2 SoCs"

	depends on OF

	depends on HAS_IOMEM

	select GENERIC_PINCTRL_GROUPS

	select GENERIC_PINMUX_FUNCTIONS

	select GENERIC_PINCONF

	help

	  This selects the device tree based generic pinctrl driver.



config PINCTRL_SX150X

	bool "Semtech SX150x I2C GPIO expander pinctrl driver"

	depends on I2C=y

	select PINMUX

	select PINCONF

	select GENERIC_PINCONF

	select GPIOLIB

	select GPIOLIB_IRQCHIP

	select REGMAP

	help

	  Say yes here to provide support for Semtech SX150x-series I2C

	  GPIO expanders as pinctrl module.

	  Compatible models include:

	  - 8 bits:  sx1508q, sx1502q

	  - 16 bits: sx1509q, sx1506q



config PINCTRL_PISTACHIO

	bool "IMG Pistachio SoC pinctrl driver"

	depends on OF && (MIPS || COMPILE_TEST)

	depends on GPIOLIB

	select PINMUX

	select GENERIC_PINCONF

	select GPIOLIB_IRQCHIP

	select GENERIC_PINCTRL_GROUPS

	select GENERIC_PINMUX_FUNCTIONS

	select OF_GPIO

    help

	  This support pinctrl and gpio driver for IMG Pistachio SoC.

	select REGMAP_MMIO



config PINCTRL_ST

config PINCTRL_OXNAS

	bool

	depends on OF

	select PINMUX

	select PINCONF

	select GPIOLIB_IRQCHIP



config PINCTRL_STMFX

	tristate "STMicroelectronics STMFX GPIO expander pinctrl driver"

	depends on I2C

	depends on OF_GPIO

	select GENERIC_PINCONF

	select GPIOLIB

	select OF_GPIO

	select GPIOLIB_IRQCHIP

	select MFD_STMFX

	help

	  Driver for STMicroelectronics Multi-Function eXpander (STMFX)

	  GPIO expander.

	  This provides a GPIO interface supporting inputs and outputs,

	  and configuring push-pull, open-drain, and can also be used as

	  interrupt-controller.



config PINCTRL_MAX77620

	tristate "MAX77620/MAX20024 Pincontrol support"

	depends on MFD_MAX77620 && OF

	select PINMUX

	select GENERIC_PINCONF

	help

	  Say Yes here to enable Pin control support for Maxim PMIC MAX77620.

	  This PMIC has 8 GPIO pins that work as GPIO as well as special

	  function in alternate mode. This driver also configure push-pull,

	  open drain, FPS slots etc.

	select MFD_SYSCON



config PINCTRL_PALMAS

	tristate "Pinctrl driver for the PALMAS Series MFD devices"
@@ -334,41 +361,16 @@ config PINCTRL_PIC32MZDA 
	def_bool y if PIC32MZDA

	select PINCTRL_PIC32



config PINCTRL_ZYNQ

	bool "Pinctrl driver for Xilinx Zynq"

	depends on ARCH_ZYNQ

	select PINMUX

	select GENERIC_PINCONF

	help

	  This selects the pinctrl driver for Xilinx Zynq.



config PINCTRL_ZYNQMP

	tristate "Pinctrl driver for Xilinx ZynqMP"

	depends on ZYNQMP_FIRMWARE

config PINCTRL_PISTACHIO

	bool "IMG Pistachio SoC pinctrl driver"

	depends on OF && (MIPS || COMPILE_TEST)

	depends on GPIOLIB

	select PINMUX

	select GENERIC_PINCONF

	default ZYNQMP_FIRMWARE

	help

	  This selects the pinctrl driver for Xilinx ZynqMP platform.

	  This driver will query the pin information from the firmware

	  and allow configuring the pins.

	  Configuration can include the mux function to select on those

	  pin(s)/group(s), and various pin configuration parameters

	  such as pull-up, slew rate, etc.

	  This driver can also be built as a module. If so, the module

	  will be called pinctrl-zynqmp.



config PINCTRL_INGENIC

	bool "Pinctrl driver for the Ingenic JZ47xx SoCs"

	default MACH_INGENIC

	depends on OF

	depends on MIPS || COMPILE_TEST

	select GENERIC_PINCONF

	select GENERIC_PINCTRL_GROUPS

	select GENERIC_PINMUX_FUNCTIONS

	select GPIOLIB

	select GPIOLIB_IRQCHIP

	select REGMAP_MMIO

	select OF_GPIO

	help

	  This support pinctrl and GPIO driver for IMG Pistachio SoC.



config PINCTRL_RK805

	tristate "Pinctrl and GPIO driver for RK805 PMIC"
@@ -379,53 +381,75 @@ config PINCTRL_RK805 
	help

	  This selects the pinctrl driver for RK805.



config PINCTRL_OCELOT

	bool "Pinctrl driver for the Microsemi Ocelot and Jaguar2 SoCs"

config PINCTRL_ROCKCHIP

	tristate "Rockchip gpio and pinctrl driver"

	depends on ARCH_ROCKCHIP || COMPILE_TEST

	depends on OF

	depends on HAS_IOMEM

	select GPIOLIB

	select GPIOLIB_IRQCHIP

	select PINMUX

	select GENERIC_PINCONF

	select GENERIC_PINCTRL_GROUPS

	select GENERIC_PINMUX_FUNCTIONS

	select GENERIC_IRQ_CHIP

	select MFD_SYSCON

	select OF_GPIO

	select REGMAP_MMIO

	default ARCH_ROCKCHIP

	help

          This support pinctrl and GPIO driver for Rockchip SoCs.



config PINCTRL_MICROCHIP_SGPIO

	bool "Pinctrl driver for Microsemi/Microchip Serial GPIO"

config PINCTRL_SINGLE

	tristate "One-register-per-pin type device tree based pinctrl driver"

	depends on OF

	depends on HAS_IOMEM

	select GPIOLIB

	select GPIOLIB_IRQCHIP

	select GENERIC_PINCONF

	select GENERIC_PINCTRL_GROUPS

	select GENERIC_PINMUX_FUNCTIONS

	select OF_GPIO

	select GENERIC_PINCONF

	help

	  Support for the serial GPIO interface used on Microsemi and

	  Microchip SoC's. By using a serial interface, the SIO

	  controller significantly extends the number of available

	  GPIOs with a minimum number of additional pins on the

	  device. The primary purpose of the SIO controller is to

	  connect control signals from SFP modules and to act as an

	  LED controller.

	  This selects the device tree based generic pinctrl driver.



config PINCTRL_K210

	bool "Pinctrl driver for the Canaan Kendryte K210 SoC"

	depends on RISCV && SOC_CANAAN && OF

	select GENERIC_PINMUX_FUNCTIONS

config PINCTRL_ST

	bool

	depends on OF

	select PINMUX

	select PINCONF

	select GPIOLIB_IRQCHIP



config PINCTRL_STMFX

	tristate "STMicroelectronics STMFX GPIO expander pinctrl driver"

	depends on I2C

	depends on OF_GPIO

	select GENERIC_PINCONF

	select GPIOLIB_IRQCHIP

	select MFD_STMFX

	help

	  Driver for STMicroelectronics Multi-Function eXpander (STMFX)

	  GPIO expander.

	  This provides a GPIO interface supporting inputs and outputs,

	  and configuring push-pull, open-drain, and can also be used as

	  interrupt-controller.



config PINCTRL_SX150X

	bool "Semtech SX150x I2C GPIO expander pinctrl driver"

	depends on I2C=y

	select PINMUX

	select PINCONF

	select GENERIC_PINCONF

	select GPIOLIB

	select OF_GPIO

	select REGMAP_MMIO

	default SOC_CANAAN

	select GPIOLIB_IRQCHIP

	select REGMAP

	help

	  Add support for the Canaan Kendryte K210 RISC-V SOC Field

	  Programmable IO Array (FPIOA) controller.

	  Say Y here to provide support for Semtech SX150x-series I2C

	  GPIO expanders as pinctrl module.

	  Compatible models include:

	  - 8 bits:  sx1508q, sx1502q

	  - 16 bits: sx1509q, sx1506q



config PINCTRL_KEEMBAY

	tristate "Pinctrl driver for Intel Keem Bay SoC"

	depends on ARCH_KEEMBAY || (ARM64 && COMPILE_TEST)

config PINCTRL_TB10X

	bool

	depends on OF && ARC_PLAT_TB10X

	select GPIOLIB



config PINCTRL_THUNDERBAY

	tristate "Generic pinctrl and GPIO driver for Intel Thunder Bay SoC"

	depends on ARCH_THUNDERBAY || (ARM64 && COMPILE_TEST)

	depends on HAS_IOMEM

	select PINMUX

	select PINCONF
@@ -436,18 +460,45 @@ config PINCTRL_KEEMBAY 
	select GPIOLIB_IRQCHIP

	select GPIO_GENERIC

	help

	  This selects pin control driver for the Intel Keembay SoC.

	  It provides pin config functions such as pullup, pulldown,

	  interrupt, drive strength, sec lock, schmitt trigger, slew

	  This selects pin control driver for the Intel Thunder Bay SoC.

	  It provides pin config functions such as pull-up, pull-down,

	  interrupt, drive strength, sec lock, Schmitt trigger, slew

	  rate control and direction control. This module will be

	  called as pinctrl-keembay.

	  called as pinctrl-thunderbay.



config PINCTRL_ZYNQ

	bool "Pinctrl driver for Xilinx Zynq"

	depends on ARCH_ZYNQ

	select PINMUX

	select GENERIC_PINCONF

	help

	  This selects the pinctrl driver for Xilinx Zynq.



config PINCTRL_ZYNQMP

	tristate "Pinctrl driver for Xilinx ZynqMP"

	depends on ZYNQMP_FIRMWARE

	select PINMUX

	select GENERIC_PINCONF

	default ZYNQMP_FIRMWARE

	help

	  This selects the pinctrl driver for Xilinx ZynqMP platform.

	  This driver will query the pin information from the firmware

	  and allow configuring the pins.

	  Configuration can include the mux function to select on those

	  pin(s)/group(s), and various pin configuration parameters

	  such as pull-up, slew rate, etc.

	  This driver can also be built as a module. If so, the module

	  will be called pinctrl-zynqmp.



source "drivers/pinctrl/actions/Kconfig"

source "drivers/pinctrl/aspeed/Kconfig"

source "drivers/pinctrl/bcm/Kconfig"

source "drivers/pinctrl/berlin/Kconfig"

source "drivers/pinctrl/cirrus/Kconfig"

source "drivers/pinctrl/freescale/Kconfig"

source "drivers/pinctrl/intel/Kconfig"

source "drivers/pinctrl/mediatek/Kconfig"

source "drivers/pinctrl/meson/Kconfig"

source "drivers/pinctrl/mvebu/Kconfig"

source "drivers/pinctrl/nomadik/Kconfig"

source "drivers/pinctrl/nuvoton/Kconfig"
@@ -463,59 +514,7 @@ source "drivers/pinctrl/sunxi/Kconfig" 
source "drivers/pinctrl/tegra/Kconfig"

source "drivers/pinctrl/ti/Kconfig"

source "drivers/pinctrl/uniphier/Kconfig"

source "drivers/pinctrl/vt8500/Kconfig"

source "drivers/pinctrl/mediatek/Kconfig"

source "drivers/pinctrl/meson/Kconfig"

source "drivers/pinctrl/cirrus/Kconfig"

source "drivers/pinctrl/visconti/Kconfig"



config PINCTRL_XWAY

	bool

	depends on SOC_TYPE_XWAY

	depends on PINCTRL_LANTIQ



config PINCTRL_TB10X

	bool

	depends on OF && ARC_PLAT_TB10X

	select GPIOLIB



config PINCTRL_EQUILIBRIUM

	tristate "Generic pinctrl and GPIO driver for Intel Lightning Mountain SoC"

	depends on OF && HAS_IOMEM

	depends on X86 || COMPILE_TEST

	select PINMUX

	select PINCONF

	select GPIOLIB

	select GPIO_GENERIC

	select GPIOLIB_IRQCHIP

	select GENERIC_PINCONF

	select GENERIC_PINCTRL_GROUPS

	select GENERIC_PINMUX_FUNCTIONS



	help

	  Equilibrium pinctrl driver is a pinctrl & GPIO driver for Intel Lightning

	  Mountain network processor SoC that supports both the linux GPIO and pin

	  control frameworks. It provides interfaces to setup pinmux, assign desired

	  pin functions, configure GPIO attributes for LGM SoC pins. Pinmux and

	  pinconf settings are retrieved from device tree.



config PINCTRL_THUNDERBAY

	tristate "Generic pinctrl and GPIO driver for Intel Thunder Bay SoC"

	depends on ARCH_THUNDERBAY || (ARM64 && COMPILE_TEST)

	depends on HAS_IOMEM

	select PINMUX

	select PINCONF

	select GENERIC_PINCONF

	select GENERIC_PINCTRL_GROUPS

	select GENERIC_PINMUX_FUNCTIONS

	select GPIOLIB

	select GPIOLIB_IRQCHIP

	select GPIO_GENERIC

	help

	  This selects pin control driver for the Intel Thunder Bay SoC.

	  It provides pin config functions such as pullup, pulldown,

	  interrupt, drive strength, sec lock, schmitt trigger, slew

	  rate control and direction control. This module will be

	  called as pinctrl-thunderbay.

source "drivers/pinctrl/vt8500/Kconfig"



endif

drivers/pinctrl/Makefile

+24 −23
Original line number Diff line number Diff line
@@ -6,57 +6,59 @@ subdir-ccflags-$(CONFIG_DEBUG_PINCTRL) += -DDEBUG 
obj-y				+= core.o pinctrl-utils.o

obj-$(CONFIG_PINMUX)		+= pinmux.o

obj-$(CONFIG_PINCONF)		+= pinconf.o

obj-$(CONFIG_OF)		+= devicetree.o

obj-$(CONFIG_GENERIC_PINCONF)	+= pinconf-generic.o

obj-$(CONFIG_OF)		+= devicetree.o



obj-$(CONFIG_PINCTRL_AMD)	+= pinctrl-amd.o

obj-$(CONFIG_PINCTRL_APPLE_GPIO) += pinctrl-apple-gpio.o

obj-$(CONFIG_PINCTRL_ARTPEC6)	+= pinctrl-artpec6.o

obj-$(CONFIG_PINCTRL_AS3722)	+= pinctrl-as3722.o

obj-$(CONFIG_PINCTRL_AXP209)	+= pinctrl-axp209.o

obj-$(CONFIG_PINCTRL_AT91)	+= pinctrl-at91.o

obj-$(CONFIG_PINCTRL_AT91PIO4)	+= pinctrl-at91-pio4.o

obj-$(CONFIG_PINCTRL_AMD)	+= pinctrl-amd.o

obj-$(CONFIG_PINCTRL_AXP209)	+= pinctrl-axp209.o

obj-$(CONFIG_PINCTRL_BM1880)	+= pinctrl-bm1880.o

obj-$(CONFIG_PINCTRL_DA850_PUPD) += pinctrl-da850-pupd.o

obj-$(CONFIG_PINCTRL_DA9062)	+= pinctrl-da9062.o

obj-$(CONFIG_PINCTRL_DIGICOLOR)	+= pinctrl-digicolor.o

obj-$(CONFIG_PINCTRL_FALCON)	+= pinctrl-falcon.o

obj-$(CONFIG_PINCTRL_EQUILIBRIUM)   += pinctrl-equilibrium.o

obj-$(CONFIG_PINCTRL_GEMINI)	+= pinctrl-gemini.o

obj-$(CONFIG_PINCTRL_INGENIC)	+= pinctrl-ingenic.o

obj-$(CONFIG_PINCTRL_K210)	+= pinctrl-k210.o

obj-$(CONFIG_PINCTRL_KEEMBAY)	+= pinctrl-keembay.o

obj-$(CONFIG_PINCTRL_LANTIQ)	+= pinctrl-lantiq.o

obj-$(CONFIG_PINCTRL_FALCON)	+= pinctrl-falcon.o

obj-$(CONFIG_PINCTRL_XWAY)	+= pinctrl-xway.o

obj-$(CONFIG_PINCTRL_LPC18XX)	+= pinctrl-lpc18xx.o

obj-$(CONFIG_PINCTRL_MAX77620)	+= pinctrl-max77620.o

obj-$(CONFIG_PINCTRL_MCP23S08_I2C)	+= pinctrl-mcp23s08_i2c.o

obj-$(CONFIG_PINCTRL_MCP23S08_SPI)	+= pinctrl-mcp23s08_spi.o

obj-$(CONFIG_PINCTRL_MCP23S08)	+= pinctrl-mcp23s08.o

obj-$(CONFIG_PINCTRL_MESON)	+= meson/

obj-$(CONFIG_PINCTRL_MICROCHIP_SGPIO)	+= pinctrl-microchip-sgpio.o

obj-$(CONFIG_PINCTRL_OCELOT)	+= pinctrl-ocelot.o

obj-$(CONFIG_PINCTRL_OXNAS)	+= pinctrl-oxnas.o

obj-$(CONFIG_PINCTRL_PALMAS)	+= pinctrl-palmas.o

obj-$(CONFIG_PINCTRL_PIC32)	+= pinctrl-pic32.o

obj-$(CONFIG_PINCTRL_PISTACHIO)	+= pinctrl-pistachio.o

obj-$(CONFIG_PINCTRL_RK805)	+= pinctrl-rk805.o

obj-$(CONFIG_PINCTRL_ROCKCHIP)	+= pinctrl-rockchip.o

obj-$(CONFIG_PINCTRL_SINGLE)	+= pinctrl-single.o

obj-$(CONFIG_PINCTRL_STMFX) 	+= pinctrl-stmfx.o

obj-$(CONFIG_PINCTRL_ST) 	+= pinctrl-st.o

obj-$(CONFIG_PINCTRL_SX150X)	+= pinctrl-sx150x.o

obj-$(CONFIG_ARCH_TEGRA)	+= tegra/

obj-$(CONFIG_PINCTRL_XWAY)	+= pinctrl-xway.o

obj-$(CONFIG_PINCTRL_LANTIQ)	+= pinctrl-lantiq.o

obj-$(CONFIG_PINCTRL_LPC18XX)	+= pinctrl-lpc18xx.o

obj-$(CONFIG_PINCTRL_TB10X)	+= pinctrl-tb10x.o

obj-$(CONFIG_PINCTRL_ST) 	+= pinctrl-st.o

obj-$(CONFIG_PINCTRL_STMFX) 	+= pinctrl-stmfx.o

obj-$(CONFIG_PINCTRL_ZYNQ)	+= pinctrl-zynq.o

obj-$(CONFIG_PINCTRL_ZYNQMP)	+= pinctrl-zynqmp.o

obj-$(CONFIG_PINCTRL_INGENIC)	+= pinctrl-ingenic.o

obj-$(CONFIG_PINCTRL_RK805)	+= pinctrl-rk805.o

obj-$(CONFIG_PINCTRL_OCELOT)	+= pinctrl-ocelot.o

obj-$(CONFIG_PINCTRL_MICROCHIP_SGPIO)	+= pinctrl-microchip-sgpio.o

obj-$(CONFIG_PINCTRL_EQUILIBRIUM)   += pinctrl-equilibrium.o

obj-$(CONFIG_PINCTRL_K210)	+= pinctrl-k210.o

obj-$(CONFIG_PINCTRL_KEEMBAY)	+= pinctrl-keembay.o

obj-$(CONFIG_PINCTRL_THUNDERBAY) += pinctrl-thunderbay.o

obj-$(CONFIG_PINCTRL_ZYNQMP)	+= pinctrl-zynqmp.o

obj-$(CONFIG_PINCTRL_ZYNQ)	+= pinctrl-zynq.o



obj-y				+= actions/

obj-$(CONFIG_ARCH_ASPEED)	+= aspeed/

obj-y				+= bcm/

obj-$(CONFIG_PINCTRL_BERLIN)	+= berlin/

obj-y				+= cirrus/

obj-y				+= freescale/

obj-$(CONFIG_X86)		+= intel/

obj-y				+= mediatek/

obj-$(CONFIG_PINCTRL_MESON)	+= meson/

obj-y				+= mvebu/

obj-y				+= nomadik/

obj-$(CONFIG_ARCH_NPCM7XX)	+= nuvoton/
@@ -69,9 +71,8 @@ obj-$(CONFIG_PINCTRL_SPEAR) += spear/ 
obj-y				+= sprd/

obj-$(CONFIG_PINCTRL_STM32)	+= stm32/

obj-$(CONFIG_PINCTRL_SUNXI)	+= sunxi/

obj-$(CONFIG_ARCH_TEGRA)	+= tegra/

obj-y				+= ti/

obj-$(CONFIG_PINCTRL_UNIPHIER)	+= uniphier/

obj-$(CONFIG_ARCH_VT8500)	+= vt8500/

obj-y				+= mediatek/

obj-y				+= cirrus/

obj-$(CONFIG_PINCTRL_VISCONTI)	+= visconti/

obj-$(CONFIG_ARCH_VT8500)	+= vt8500/