Commit b0a07f60 authored by Marek Vasut's avatar Marek Vasut Committed by Alexandre Torgue
Browse files

ARM: dts: stm32: Move ethernet PHY into DH SoM DT 



The PHY and the VIO regulator is populated on the SoM, move it
into the SoM DT.

Signed-off-by: default avatarMarek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: default avatarAlexandre Torgue <alexandre.torgue@st.com>
parent 9123e3a7

arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi

+0 −33
Original line number Diff line number Diff line
@@ -11,7 +11,6 @@ 
		serial0 = &uart4;

		serial1 = &usart3;

		serial2 = &uart8;

		ethernet0 = &ethernet0;

	};



	chosen {
@@ -33,16 +32,6 @@ 
		status = "okay";

	};



	ethernet_vio: vioregulator {

		compatible = "regulator-fixed";

		regulator-name = "vio";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		gpio = <&gpiog 3 GPIO_ACTIVE_LOW>;

		regulator-always-on;

		regulator-boot-on;

	};



	gpio-keys-polled {

		compatible = "gpio-keys-polled";

		#size-cells = <0>;
@@ -141,28 +130,6 @@ 
	status = "okay";

};



&ethernet0 {

	status = "okay";

	pinctrl-0 = <&ethernet0_rmii_pins_a>;

	pinctrl-1 = <&ethernet0_rmii_sleep_pins_a>;

	pinctrl-names = "default", "sleep";

	phy-mode = "rmii";

	max-speed = <100>;

	phy-handle = <&phy0>;

	st,eth-ref-clk-sel;

	phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>;



	mdio0 {

		#address-cells = <1>;

		#size-cells = <0>;

		compatible = "snps,dwmac-mdio";



		phy0: ethernet-phy@1 {

			reg = <1>;

		};

	};

};



&i2c2 {	/* Header X22 */

	pinctrl-names = "default";

	pinctrl-0 = <&i2c2_pins_a>;

arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi

+36 −0
Original line number Diff line number Diff line
@@ -9,6 +9,10 @@ 
#include <dt-bindings/mfd/st,stpmic1.h>



/ {

	aliases {

		ethernet0 = &ethernet0;

	};



	memory@c0000000 {

		device_type = "memory";

		reg = <0xC0000000 0x40000000>;
@@ -55,6 +59,16 @@ 
			no-map;

		};

	};



	ethernet_vio: vioregulator {

		compatible = "regulator-fixed";

		regulator-name = "vio";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		gpio = <&gpiog 3 GPIO_ACTIVE_LOW>;

		regulator-always-on;

		regulator-boot-on;

	};

};



&adc {
@@ -94,6 +108,28 @@ 
	status = "okay";

};



&ethernet0 {

	status = "okay";

	pinctrl-0 = <&ethernet0_rmii_pins_a>;

	pinctrl-1 = <&ethernet0_rmii_sleep_pins_a>;

	pinctrl-names = "default", "sleep";

	phy-mode = "rmii";

	max-speed = <100>;

	phy-handle = <&phy0>;

	st,eth-ref-clk-sel;

	phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>;



	mdio0 {

		#address-cells = <1>;

		#size-cells = <0>;

		compatible = "snps,dwmac-mdio";



		phy0: ethernet-phy@1 {

			reg = <1>;

		};

	};

};



&i2c4 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c4_pins_a>;