Unverified Commit ac20a73d authored by Zhu Ning's avatar Zhu Ning Committed by Mark Brown
Browse files

ASoC: codecs: ES8326: Fix power-up sequence



Old power-up sequence causes large pop noise during start-up.
Using a new sequence instead.

Also, the registers are now reset to default value in suspend
function.

Signed-off-by: default avatarZhu Ning <zhuning0077@gmail.com>
Link: https://lore.kernel.org/r/20230717033223.42506-3-zhuning0077@gmail.com


Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent f1230a27
Loading
Loading
Loading
Loading
+68 −27
Original line number Diff line number Diff line
@@ -638,40 +638,77 @@ static irqreturn_t es8326_irq(int irq, void *dev_id)
static int es8326_resume(struct snd_soc_component *component)
{
	struct es8326_priv *es8326 = snd_soc_component_get_drvdata(component);
	unsigned int reg;

	regcache_cache_only(es8326->regmap, false);
	regcache_sync(es8326->regmap);

	/* reset internal clock state */
	regmap_write(es8326->regmap, ES8326_RESET, 0x1f);
	regmap_write(es8326->regmap, ES8326_VMIDSEL, 0x0E);
	usleep_range(10000, 15000);
	regmap_write(es8326->regmap, ES8326_HPJACK_TIMER, 0x88);
	/* set headphone default type and detect pin */
	regmap_write(es8326->regmap, ES8326_HPDET_TYPE, 0x81);
	regmap_write(es8326->regmap, ES8326_CLK_RESAMPLE, 0x05);

	/* set internal oscillator as clock source of headpone cp */
	regmap_write(es8326->regmap, ES8326_CLK_DIV_CPC, 0x84);
	regmap_write(es8326->regmap, ES8326_CLK_CTL, ES8326_CLK_ON);
	/* Two channel ADC */
	regmap_write(es8326->regmap, ES8326_PULLUP_CTL, 0x02);
	/* clock manager reset release */
	regmap_write(es8326->regmap, ES8326_RESET, 0x17);
	/* set headphone detection as half scan mode */
	regmap_write(es8326->regmap, ES8326_HP_MISC, 0x08);
	regmap_write(es8326->regmap, ES8326_PULLUP_CTL, 0x00);

	/* enable headphone driver */
	regmap_write(es8326->regmap, ES8326_HP_DRIVER, 0xa7);
	usleep_range(2000, 5000);
	regmap_write(es8326->regmap, ES8326_HP_DRIVER_REF, 0xab);
	usleep_range(2000, 5000);
	regmap_write(es8326->regmap, ES8326_HP_DRIVER_REF, 0xbb);
	usleep_range(2000, 5000);
	regmap_write(es8326->regmap, ES8326_HP_DRIVER, 0xa1);

	regmap_write(es8326->regmap, ES8326_CLK_INV, 0x00);
	regmap_write(es8326->regmap, ES8326_CLK_DIV_CPC, 0x1F);
	regmap_write(es8326->regmap, ES8326_CLK_VMIDS1, 0xC8);
	regmap_write(es8326->regmap, ES8326_CLK_VMIDS2, 0x88);
	regmap_write(es8326->regmap, ES8326_CLK_CAL_TIME, 0x20);
	regmap_write(es8326->regmap, ES8326_CLK_VMIDS1, 0xc4);
	regmap_write(es8326->regmap, ES8326_CLK_VMIDS2, 0x81);
	regmap_write(es8326->regmap, ES8326_CLK_CAL_TIME, 0x00);

	/* turn off headphone out */
	regmap_write(es8326->regmap, ES8326_HP_CAL, 0x00);
	/* set ADC and DAC in low power mode */
	regmap_write(es8326->regmap, ES8326_ANA_LP, 0xf0);

	/* force micbias on */
	regmap_write(es8326->regmap, ES8326_ANA_MICBIAS, 0x4f);
	regmap_write(es8326->regmap, ES8326_SYS_BIAS, 0x08);
	regmap_write(es8326->regmap, ES8326_DAC2HPMIX, 0x22);
	regmap_write(es8326->regmap, ES8326_ADC1_SRC, es8326->mic1_src);
	regmap_write(es8326->regmap, ES8326_ADC2_SRC, es8326->mic2_src);
	regmap_write(es8326->regmap, ES8326_HPJACK_TIMER, 0x88);
	regmap_write(es8326->regmap, ES8326_HPDET_TYPE,
		     ES8326_HP_DET_SRC_PIN9 | es8326->jack_pol);
	regmap_write(es8326->regmap, ES8326_INT_SOURCE, es8326->interrupt_src);
	regmap_write(es8326->regmap, ES8326_INTOUT_IO, es8326->interrupt_clk);
	regmap_write(es8326->regmap, ES8326_ANA_VSEL, 0x7F);
	/* select vdda as micbias source */
	regmap_write(es8326->regmap, ES8326_VMIDLOW, 0x23);
	/* set dac dsmclip = 1 */
	regmap_write(es8326->regmap, ES8326_DAC_DSM, 0x08);
	regmap_write(es8326->regmap, ES8326_DAC_VPPSCALE, 0x15);

	regmap_write(es8326->regmap, ES8326_INT_SOURCE,
		    (ES8326_INT_SRC_PIN9 | ES8326_INT_SRC_BUTTON));
	regmap_write(es8326->regmap, ES8326_INTOUT_IO,
		     es8326->interrupt_clk);
	regmap_write(es8326->regmap, ES8326_SDINOUT1_IO,
		    (ES8326_IO_DMIC_CLK << ES8326_SDINOUT1_SHIFT));
	regmap_write(es8326->regmap, ES8326_SDINOUT23_IO, ES8326_IO_INPUT);

	regmap_write(es8326->regmap, ES8326_ANA_PDN, 0x3b);
	regmap_write(es8326->regmap, ES8326_RESET, ES8326_CSM_ON);
	snd_soc_component_update_bits(component, ES8326_PGAGAIN,
				      ES8326_MIC_SEL_MASK, ES8326_MIC1_SEL);
	regmap_update_bits(es8326->regmap, ES8326_PGAGAIN, ES8326_MIC_SEL_MASK,
			   ES8326_MIC1_SEL);

	regmap_read(es8326->regmap, ES8326_CHIP_VERSION, &reg);
	if ((reg & ES8326_VERSION_B) == 1) {
		regmap_write(es8326->regmap, ES8326_ANA_MICBIAS, 0xDD);
		regmap_write(es8326->regmap, ES8326_ANA_VSEL, 0x7F);
		regmap_write(es8326->regmap, ES8326_VMIDLOW, 0x0F);
		/* enable button detect */
		regmap_write(es8326->regmap, ES8326_HP_DRIVER, 0xA0);
	}
	regmap_update_bits(es8326->regmap, ES8326_DAC_MUTE, ES8326_MUTE_MASK,
			   ES8326_MUTE);

	regmap_write(es8326->regmap, ES8326_HPDET_TYPE, 0x80 |
			((es8326->version == ES8326_VERSION_B) ?
			(ES8326_HP_DET_SRC_PIN9 | es8326->jack_pol) :
			(ES8326_HP_DET_SRC_PIN9 | es8326->jack_pol | 0x04)));

	es8326_irq(es8326->irq, es8326);
	return 0;
@@ -688,6 +725,10 @@ static int es8326_suspend(struct snd_soc_component *component)
	regcache_cache_only(es8326->regmap, true);
	regcache_mark_dirty(es8326->regmap);

	/* reset register value to default */
	regmap_write(es8326->regmap, ES8326_CSM_I2C_STA, 0x01);
	usleep_range(1000, 3000);
	regmap_write(es8326->regmap, ES8326_CSM_I2C_STA, 0x00);
	return 0;
}

@@ -717,7 +758,7 @@ static int es8326_probe(struct snd_soc_component *component)
	ret = device_property_read_u8(component->dev, "everest,jack-pol", &es8326->jack_pol);
	if (ret != 0) {
		dev_dbg(component->dev, "jack-pol return %d", ret);
		es8326->jack_pol = ES8326_HP_DET_BUTTON_POL | ES8326_HP_TYPE_OMTP;
		es8326->jack_pol = ES8326_HP_TYPE_AUTO;
	}
	dev_dbg(component->dev, "jack-pol %x", es8326->jack_pol);

+9 −1
Original line number Diff line number Diff line
@@ -160,6 +160,13 @@
#define ES8326_HP_TYPE_AUTO	(1 << 0)
#define ES8326_HP_TYPE_AUTO_INV	(0 << 0)

/* ES8326_INT_SOURCE */
#define ES8326_INT_SRC_DAC_MOZ (1 << 0)
#define ES8326_INT_SRC_ADC_MOZ (1 << 1)
#define ES8326_INT_SRC_BUTTON (1 << 2)
#define ES8326_INT_SRC_PIN9 (1 << 3)
#define ES8326_INT_SRC_PIN27 (1 << 4)

/* ES8326_SDINOUT1_IO */
#define ES8326_IO_INPUT	(0 << 0)
#define ES8326_IO_SDIN_SLOT0 (1 << 0)
@@ -183,6 +190,7 @@
#define ES8326_HPBUTTON_FLAG (1 << 0)

/* ES8326_CHIP_VERSION 0xFF */
#define ES8326_VERSION_B (1 << 0)
#define ES8326_VERSION (1 << 0)
#define ES8326_VERSION_B (3 << 0)

#endif