Commit ab806618 authored by Bjorn Andersson's avatar Bjorn Andersson Committed by Andy Gross
Browse files

ARM: dts: qcom: msm8974: Add Sony Xperia Z2 Tablet 



This adds a basic DTS file for the Sony Xperia Z2 Tablet, containing
definitions for regulators, eMMC/SD-card, USB, WiFi, Touchscreen,
charger, backlight, coincell and buttons.

Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: default avatarAndy Gross <andy.gross@linaro.org>
parent fb83f201

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -701,6 +701,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ 
	qcom-msm8660-surf.dtb \

	qcom-msm8960-cdp.dtb \

	qcom-msm8974-lge-nexus5-hammerhead.dtb \

	qcom-msm8974-sony-xperia-castor.dtb \

	qcom-msm8974-sony-xperia-honami.dtb \

	qcom-mdm9615-wp8548-mangoh-green.dtb

dtb-$(CONFIG_ARCH_REALVIEW) += \

arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts

0 → 100644
+641 −0
Original line number Diff line number Diff line 
#include "qcom-msm8974pro.dtsi"

#include "qcom-pm8841.dtsi"

#include "qcom-pm8941.dtsi"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/input/input.h>

#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>



/ {

	model = "Sony Xperia Z2 Tablet";

	compatible = "sony,xperia-castor", "qcom,msm8974";



	aliases {

		serial0 = &blsp1_uart2;

	};



	chosen {

		stdout-path = "serial0:115200n8";

	};



	gpio-keys {

		compatible = "gpio-keys";

		input-name = "gpio-keys";



		pinctrl-names = "default";

		pinctrl-0 = <&gpio_keys_pin_a>;



		volume-down {

			label = "volume_down";

			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;

			linux,input-type = <1>;

			linux,code = <KEY_VOLUMEDOWN>;

		};



		camera-snapshot {

			label = "camera_snapshot";

			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;

			linux,input-type = <1>;

			linux,code = <KEY_CAMERA>;

		};



		camera-focus {

			label = "camera_focus";

			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;

			linux,input-type = <1>;

			linux,code = <KEY_CAMERA_FOCUS>;

		};



		volume-up {

			label = "volume_up";

			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;

			linux,input-type = <1>;

			linux,code = <KEY_VOLUMEUP>;

		};

	};



	smd {

		rpm {

			rpm_requests {

				pm8941-regulators {

					vdd_l1_l3-supply = <&pm8941_s1>;

					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;

					vdd_l4_l11-supply = <&pm8941_s1>;

					vdd_l5_l7-supply = <&pm8941_s2>;

					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;

					vdd_l9_l10_l17_l22-supply = <&vreg_boost>;

					vdd_l13_l20_l23_l24-supply = <&vreg_boost>;

					vdd_l21-supply = <&vreg_boost>;



					s1 {

						regulator-min-microvolt = <1300000>;

						regulator-max-microvolt = <1300000>;

						regulator-always-on;

						regulator-boot-on;

					};



					s2 {

						regulator-min-microvolt = <2150000>;

						regulator-max-microvolt = <2150000>;

						regulator-boot-on;

					};



					s3 {

						regulator-min-microvolt = <1800000>;

						regulator-max-microvolt = <1800000>;

						regulator-always-on;

						regulator-boot-on;



						regulator-system-load = <154000>;

					};



					s4 {

						regulator-min-microvolt = <5000000>;

						regulator-max-microvolt = <5000000>;

					};



					l1 {

						regulator-min-microvolt = <1225000>;

						regulator-max-microvolt = <1225000>;



						regulator-always-on;

						regulator-boot-on;

					};



					l2 {

						regulator-min-microvolt = <1200000>;

						regulator-max-microvolt = <1200000>;

					};



					l3 {

						regulator-min-microvolt = <1200000>;

						regulator-max-microvolt = <1200000>;

					};



					l4 {

						regulator-min-microvolt = <1225000>;

						regulator-max-microvolt = <1225000>;

					};



					l5 {

						regulator-min-microvolt = <1800000>;

						regulator-max-microvolt = <1800000>;

					};



					l6 {

						regulator-min-microvolt = <1800000>;

						regulator-max-microvolt = <1800000>;



						regulator-boot-on;

					};



					l7 {

						regulator-min-microvolt = <1800000>;

						regulator-max-microvolt = <1800000>;



						regulator-boot-on;

					};



					l8 {

						regulator-min-microvolt = <1800000>;

						regulator-max-microvolt = <1800000>;

					};



					l9 {

						regulator-min-microvolt = <1800000>;

						regulator-max-microvolt = <2950000>;

					};



					l11 {

						regulator-min-microvolt = <1300000>;

						regulator-max-microvolt = <1350000>;

					};



					l12 {

						regulator-min-microvolt = <1800000>;

						regulator-max-microvolt = <1800000>;



						regulator-always-on;

						regulator-boot-on;

					};



					l13 {

						regulator-min-microvolt = <1800000>;

						regulator-max-microvolt = <2950000>;



						regulator-boot-on;

					};



					l14 {

						regulator-min-microvolt = <1800000>;

						regulator-max-microvolt = <1800000>;

					};



					l15 {

						regulator-min-microvolt = <2050000>;

						regulator-max-microvolt = <2050000>;

					};



					l16 {

						regulator-min-microvolt = <2700000>;

						regulator-max-microvolt = <2700000>;

					};



					l17 {

						regulator-min-microvolt = <2700000>;

						regulator-max-microvolt = <2700000>;

					};



					l18 {

						regulator-min-microvolt = <2850000>;

						regulator-max-microvolt = <2850000>;

					};



					l19 {

						regulator-min-microvolt = <2850000>;

						regulator-max-microvolt = <2850000>;

					};



					l20 {

						regulator-min-microvolt = <2950000>;

						regulator-max-microvolt = <2950000>;



						regulator-allow-set-load;

						regulator-boot-on;

						regulator-allow-set-load;

						regulator-system-load = <500000>;

					};



					l21 {

						regulator-min-microvolt = <2950000>;

						regulator-max-microvolt = <2950000>;



						regulator-boot-on;

					};



					l22 {

						regulator-min-microvolt = <3000000>;

						regulator-max-microvolt = <3000000>;

					};



					l23 {

						regulator-min-microvolt = <2800000>;

						regulator-max-microvolt = <2800000>;

					};



					l24 {

						regulator-min-microvolt = <3075000>;

						regulator-max-microvolt = <3075000>;



						regulator-boot-on;

					};

				};

			};

		};

	};



	vreg_bl_vddio: lcd-backlight-vddio {

		compatible = "regulator-fixed";

		regulator-name = "vreg_bl_vddio";

		regulator-min-microvolt = <3150000>;

		regulator-max-microvolt = <3150000>;



		gpio = <&msmgpio 69 0>;

		enable-active-high;



		vin-supply = <&pm8941_s3>;

		startup-delay-us = <70000>;



		pinctrl-names = "default";

		pinctrl-0 = <&lcd_backlight_en_pin_a>;

	};



	vreg_vsp: lcd-dcdc-regulator {

		compatible = "regulator-fixed";

		regulator-name = "vreg_vsp";

		regulator-min-microvolt = <5600000>;

		regulator-max-microvolt = <5600000>;



		gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;

		enable-active-high;



		pinctrl-names = "default";

		pinctrl-0 = <&lcd_dcdc_en_pin_a>;

	};



	vreg_wlan: wlan-regulator {

		compatible = "regulator-fixed";



		regulator-name = "wl-reg";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;



		gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;

		enable-active-high;



		pinctrl-names = "default";

		pinctrl-0 = <&wlan_regulator_pin>;

	};

};



&soc {

	sdhci@f9824900 {

		status = "ok";



		vmmc-supply = <&pm8941_l20>;

		vqmmc-supply = <&pm8941_s3>;



		bus-width = <8>;

		non-removable;



		pinctrl-names = "default";

		pinctrl-0 = <&sdhc1_pin_a>;

	};



	sdhci@f9864900 {

		status = "ok";



		max-frequency = <100000000>;

		non-removable;

		vmmc-supply = <&vreg_wlan>;



		pinctrl-names = "default";

		pinctrl-0 = <&sdhc3_pin_a>;



		#address-cells = <1>;

		#size-cells = <0>;



		bcrmf@1 {

			compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";

			reg = <1>;



			brcm,drive-strength = <10>;



			pinctrl-names = "default";

			pinctrl-0 = <&wlan_sleep_clk_pin>;

		};

	};



	sdhci@f98a4900 {

		status = "ok";



		bus-width = <4>;



		vmmc-supply = <&pm8941_l21>;

		vqmmc-supply = <&pm8941_l13>;



		cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;



		pinctrl-names = "default";

		pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;

	};



	serial@f991e000 {

		status = "ok";



		pinctrl-names = "default";

		pinctrl-0 = <&blsp1_uart2_pin_a>;

	};



	usb@f9a55000 {

		status = "ok";



		phys = <&usb_hs1_phy>;

		phy-select = <&tcsr 0xb000 0>;

		extcon = <&smbb>, <&usb_id>;

		vbus-supply = <&chg_otg>;



		hnp-disable;

		srp-disable;

		adp-disable;



		ulpi {

			phy@a {

				status = "ok";



				v1p8-supply = <&pm8941_l6>;

				v3p3-supply = <&pm8941_l24>;



				extcon = <&smbb>;

				qcom,init-seq = /bits/ 8 <0x1 0x64>;

			};

		};

	};



	pinctrl@fd510000 {

		blsp1_uart2_pin_a: blsp1-uart2-pin-active {

			rx {

				pins = "gpio5";

				function = "blsp_uart2";



				drive-strength = <2>;

				bias-pull-up;

			};



			tx {

				pins = "gpio4";

				function = "blsp_uart2";



				drive-strength = <4>;

				bias-disable;

			};

		};



		i2c8_pins: i2c8 {

			mux {

				pins = "gpio47", "gpio48";

				function = "blsp_i2c8";



				drive-strength = <2>;

				bias-disable;

			};

		};



		i2c11_pins: i2c11 {

			mux {

				pins = "gpio83", "gpio84";

				function = "blsp_i2c11";



				drive-strength = <2>;

				bias-disable;

			};

		};



		lcd_backlight_en_pin_a: lcd-backlight-vddio {

			pins = "gpio69";

			drive-strength = <10>;

			output-low;

			bias-disable;

		};



		sdhc1_pin_a: sdhc1-pin-active {

			clk {

				pins = "sdc1_clk";

				drive-strength = <16>;

				bias-disable;

			};



			cmd-data {

				pins = "sdc1_cmd", "sdc1_data";

				drive-strength = <10>;

				bias-pull-up;

			};

		};



		sdhc2_cd_pin_a: sdhc2-cd-pin-active {

			pins = "gpio62";

			function = "gpio";



			drive-strength = <2>;

			bias-disable;

		 };



		sdhc2_pin_a: sdhc2-pin-active {

			clk {

				pins = "sdc2_clk";

				drive-strength = <6>;

				bias-disable;

			};



			cmd-data {

				pins = "sdc2_cmd", "sdc2_data";

				drive-strength = <6>;

				bias-pull-up;

			};

		};



		sdhc3_pin_a: sdhc3-pin-active {

			clk {

				pins = "gpio40";

				function = "sdc3";



				drive-strength = <10>;

				bias-disable;

			};



			cmd {

				pins = "gpio39";

				function = "sdc3";



				drive-strength = <10>;

				bias-pull-up;

			};



			data {

				pins = "gpio35", "gpio36", "gpio37", "gpio38";

				function = "sdc3";



				drive-strength = <10>;

				bias-pull-up;

			};

		};



		ts_int_pin: synaptics {

			pin {

				pins = "gpio86";

				function = "gpio";



				drive-strength = <2>;

				bias-disable;

				input-enable;

			};

		};

	};



	i2c@f9964000 {

		status = "ok";



		clock-frequency = <355000>;

		qcom,src-freq = <50000000>;



		pinctrl-names = "default";

		pinctrl-0 = <&i2c8_pins>;



		synaptics@2c {

			compatible = "syna,rmi-i2c";

			reg = <0x2c>;



			interrupt-parent = <&msmgpio>;

			interrupts = <86 IRQ_TYPE_EDGE_FALLING>;



			#address-cells = <1>;

			#size-cells = <0>;



			vdd-supply = <&pm8941_l22>;

			vio-supply = <&pm8941_lvs3>;



			pinctrl-names = "default";

			pinctrl-0 = <&ts_int_pin>;



			rmi-f01@1 {

				reg = <0x1>;

				syna,nosleep = <1>;

			};



			rmi-f11@11 {

				reg = <0x11>;

				syna,f11-flip-x = <1>;

				syna,sensor-type = <1>;

			};

		};

	};



	i2c@f9967000 {

		status = "ok";

		pinctrl-names = "default";

		pinctrl-0 = <&i2c11_pins>;

		clock-frequency = <355000>;

		qcom,src-freq = <50000000>;



		lp8566_wled: backlight@2c {

			compatible = "ti,lp8556";

			reg = <0x2c>;

			power-supply = <&vreg_bl_vddio>;



			bl-name = "backlight";

			dev-ctrl = /bits/ 8 <0x05>;

			init-brt = /bits/ 8 <0x3f>;

			rom_a0h {

				rom-addr = /bits/ 8 <0xa0>;

				rom-val = /bits/ 8 <0xff>;

			};

			rom_a1h {

				rom-addr = /bits/ 8 <0xa1>;

				rom-val = /bits/ 8 <0x3f>;

			};

			rom_a2h {

				rom-addr = /bits/ 8 <0xa2>;

				rom-val = /bits/ 8 <0x20>;

			};

			rom_a3h {

				rom-addr = /bits/ 8 <0xa3>;

				rom-val = /bits/ 8 <0x5e>;

			};

			rom_a4h {

				rom-addr = /bits/ 8 <0xa4>;

				rom-val = /bits/ 8 <0x02>;

			};

			rom_a5h {

				rom-addr = /bits/ 8 <0xa5>;

				rom-val = /bits/ 8 <0x04>;

			};

			rom_a6h {

				rom-addr = /bits/ 8 <0xa6>;

				rom-val = /bits/ 8 <0x80>;

			};

			rom_a7h {

				rom-addr = /bits/ 8 <0xa7>;

				rom-val = /bits/ 8 <0xf7>;

			};

			rom_a9h {

				rom-addr = /bits/ 8 <0xa9>;

				rom-val = /bits/ 8 <0x80>;

			};

			rom_aah {

				rom-addr = /bits/ 8 <0xaa>;

				rom-val = /bits/ 8 <0x0f>;

			};

			rom_aeh {

				rom-addr = /bits/ 8 <0xae>;

				rom-val = /bits/ 8 <0x0f>;

			};

		};

	};

};



&spmi_bus {

	pm8941@0 {

		charger@1000 {

			qcom,fast-charge-safe-current = <1500000>;

			qcom,fast-charge-current-limit = <1500000>;

			qcom,dc-current-limit = <1800000>;

			qcom,fast-charge-safe-voltage = <4400000>;

			qcom,fast-charge-high-threshold-voltage = <4350000>;

			qcom,fast-charge-low-threshold-voltage = <3400000>;

			qcom,auto-recharge-threshold-voltage = <4200000>;

			qcom,minimum-input-voltage = <4300000>;

		};



		gpios@c000 {

			gpio_keys_pin_a: gpio-keys-active {

				pins = "gpio2", "gpio5";

				function = "normal";



				bias-pull-up;

				power-source = <PM8941_GPIO_S3>;

			};



			wlan_sleep_clk_pin: wl-sleep-clk {

				pins = "gpio17";

				function = "func2";



				output-high;

				power-source = <PM8941_GPIO_S3>;

			};



			wlan_regulator_pin: wl-reg-active {

				pins = "gpio18";

				function = "normal";



				bias-disable;

				power-source = <PM8941_GPIO_S3>;

			};



			lcd_dcdc_en_pin_a: lcd-dcdc-en-active {

				pins = "gpio20";

				function = "normal";



				bias-disable;

				power-source = <PM8941_GPIO_S3>;

				input-disable;

				output-low;

			};



		};



		coincell@2800 {

			status = "ok";

			qcom,rset-ohms = <2100>;

			qcom,vset-millivolts = <3000>;

		};

	};

};

arch/arm/boot/dts/qcom-msm8974.dtsi

+14 −0
Original line number Diff line number Diff line
@@ -613,6 +613,20 @@ 
			status = "disabled";

		};



		sdhci@f9864900 {

			compatible = "qcom,sdhci-msm-v4";

			reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;

			reg-names = "hc_mem", "core_mem";

			interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>,

				     <GIC_SPI 224 IRQ_TYPE_NONE>;

			interrupt-names = "hc_irq", "pwr_irq";

			clocks = <&gcc GCC_SDCC3_APPS_CLK>,

				 <&gcc GCC_SDCC3_AHB_CLK>,

				 <&xo_board>;

			clock-names = "core", "iface", "xo";

			status = "disabled";

		};



		sdhci@f98a4900 {

			compatible = "qcom,sdhci-msm-v4";

			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;

arch/arm/boot/dts/qcom-msm8974pro.dtsi

0 → 100644
+18 −0
Original line number Diff line number Diff line 
#include "qcom-msm8974.dtsi"



/ {

	soc {

		sdhci@f9824900 {

			clocks = <&gcc GCC_SDCC1_APPS_CLK>,

				 <&gcc GCC_SDCC1_AHB_CLK>,

				 <&xo_board>,

				 <&gcc GCC_SDCC1_CDCCAL_FF_CLK>,

				 <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>;

			clock-names = "core", "iface", "xo", "cal", "sleep";

		};



		clock-controller@fc400000 {

				compatible = "qcom,gcc-msm8974pro";

		};

	};

};