Unverified Commit aafe9375 authored by Arnd Bergmann's avatar Arnd Bergmann Committed by Mark Brown
Browse files

ASoC: ux500: remove stedma40 references



ux500_pcm_request_chan() is never called because the dma channels
are already set up from DT. Remove this, along with the
ux500_msp_dma_params structure.

Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Reviewed-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230118161110.521504-4-arnd@kernel.org


Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 1766ac52
Loading
Loading
Loading
Loading
+2 −2
Original line number Diff line number Diff line
@@ -670,8 +670,8 @@ static int ux500_msp_dai_of_probe(struct snd_soc_dai *dai)
	if (!capture_dma_data)
		return -ENOMEM;

	playback_dma_data->addr = drvdata->msp->playback_dma_data.tx_rx_addr;
	capture_dma_data->addr = drvdata->msp->capture_dma_data.tx_rx_addr;
	playback_dma_data->addr = drvdata->msp->tx_rx_addr;
	capture_dma_data->addr = drvdata->msp->tx_rx_addr;

	playback_dma_data->maxburst = 4;
	capture_dma_data->maxburst = 4;
+1 −40
Original line number Diff line number Diff line
@@ -360,20 +360,6 @@ static int enable_msp(struct ux500_msp *msp, struct ux500_msp_config *config)
				__func__, status);
	}

	/* Make sure the correct DMA-directions are configured */
	if ((config->direction & MSP_DIR_RX) &&
			!msp->capture_dma_data.dma_cfg) {
		dev_err(msp->dev, "%s: ERROR: MSP RX-mode is not configured!",
			__func__);
		return -EINVAL;
	}
	if ((config->direction == MSP_DIR_TX) &&
			!msp->playback_dma_data.dma_cfg) {
		dev_err(msp->dev, "%s: ERROR: MSP TX-mode is not configured!",
			__func__);
		return -EINVAL;
	}

	reg_val_DMACR = readl(msp->registers + MSP_DMACR);
	if (config->direction & MSP_DIR_RX)
		reg_val_DMACR |= RX_DMA_ENABLE;
@@ -638,40 +624,17 @@ int ux500_msp_i2s_close(struct ux500_msp *msp, unsigned int dir)

}

static int ux500_msp_i2s_of_init_msp(struct platform_device *pdev,
				struct ux500_msp *msp);
{
	msp->playback_dma_data.dma_cfg = devm_kzalloc(&pdev->dev,
					sizeof(struct stedma40_chan_cfg),
					GFP_KERNEL);
	if (!msp->playback_dma_data.dma_cfg)
		return -ENOMEM;

	msp->capture_dma_data.dma_cfg = devm_kzalloc(&pdev->dev,
					sizeof(struct stedma40_chan_cfg),
					GFP_KERNEL);
	if (!msp->capture_dma_data.dma_cfg)
		return -ENOMEM;

	return 0;
}

int ux500_msp_i2s_init_msp(struct platform_device *pdev,
			struct ux500_msp **msp_p)
{
	struct resource *res = NULL;
	struct ux500_msp *msp;
	int ret;

	*msp_p = devm_kzalloc(&pdev->dev, sizeof(struct ux500_msp), GFP_KERNEL);
	msp = *msp_p;
	if (!msp)
		return -ENOMEM;

	ret = ux500_msp_i2s_of_init_msp(pdev, msp);
	if (ret)
		return ret;

	msp->dev = &pdev->dev;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -681,9 +644,7 @@ int ux500_msp_i2s_init_msp(struct platform_device *pdev,
		return -ENOMEM;
	}

	msp->playback_dma_data.tx_rx_addr = res->start + MSP_DR;
	msp->capture_dma_data.tx_rx_addr = res->start + MSP_DR;

	msp->tx_rx_addr = res->start + MSP_DR;
	msp->registers = devm_ioremap(&pdev->dev, res->start,
				      resource_size(res));
	if (msp->registers == NULL) {
+1 −8
Original line number Diff line number Diff line
@@ -462,18 +462,11 @@ struct ux500_msp_config {
	unsigned int iodelay;
};

struct ux500_msp_dma_params {
	unsigned int data_size;
	dma_addr_t tx_rx_addr;
	struct stedma40_chan_cfg *dma_cfg;
};

struct ux500_msp {
	int id;
	void __iomem *registers;
	struct device *dev;
	struct ux500_msp_dma_params playback_dma_data;
	struct ux500_msp_dma_params capture_dma_data;
	dma_addr_t tx_rx_addr;
	enum msp_state msp_state;
	int def_elem_len;
	unsigned int dir_busy;
+1 −42
Original line number Diff line number Diff line
@@ -13,7 +13,6 @@
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/slab.h>
#include <linux/platform_data/dma-ste-dma40.h>

#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -29,44 +28,6 @@
#define UX500_PLATFORM_PERIODS_MAX		48
#define UX500_PLATFORM_BUFFER_BYTES_MAX		(2048 * PAGE_SIZE)

static struct dma_chan *ux500_pcm_request_chan(struct snd_soc_pcm_runtime *rtd,
	struct snd_pcm_substream *substream)
{
	struct snd_soc_dai *dai = asoc_rtd_to_cpu(rtd, 0);
	u16 per_data_width, mem_data_width;
	struct stedma40_chan_cfg *dma_cfg;
	struct ux500_msp_dma_params *dma_params;

	dma_params = snd_soc_dai_get_dma_data(dai, substream);
	dma_cfg = dma_params->dma_cfg;

	mem_data_width = DMA_SLAVE_BUSWIDTH_2_BYTES;

	switch (dma_params->data_size) {
	case 32:
		per_data_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
		break;
	case 16:
		per_data_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
		break;
	case 8:
		per_data_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
		break;
	default:
		per_data_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
	}

	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
		dma_cfg->src_info.data_width = mem_data_width;
		dma_cfg->dst_info.data_width = per_data_width;
	} else {
		dma_cfg->src_info.data_width = per_data_width;
		dma_cfg->dst_info.data_width = mem_data_width;
	}

	return snd_dmaengine_pcm_request_channel(stedma40_filter, dma_cfg);
}

static int ux500_pcm_prepare_slave_config(struct snd_pcm_substream *substream,
		struct snd_pcm_hw_params *params,
		struct dma_slave_config *slave_config)
@@ -98,7 +59,6 @@ static int ux500_pcm_prepare_slave_config(struct snd_pcm_substream *substream,
}

static const struct snd_dmaengine_pcm_config ux500_dmaengine_of_pcm_config = {
	.compat_request_channel = ux500_pcm_request_chan,
	.prepare_slave_config = ux500_pcm_prepare_slave_config,
};

@@ -107,8 +67,7 @@ int ux500_pcm_register_platform(struct platform_device *pdev)
	int ret;

	ret = snd_dmaengine_pcm_register(&pdev->dev,
					 &ux500_dmaengine_of_pcm_config,
					 SND_DMAENGINE_PCM_FLAG_COMPAT);
					 &ux500_dmaengine_of_pcm_config, 0);
	if (ret < 0) {
		dev_err(&pdev->dev,
			"%s: ERROR: Failed to register platform '%s' (%d)!\n",