IXP4xx: move Gemtek GTWX5715 platform macros to the platform code.

#include <linux/init.h>

#include <linux/delay.h>

#include <linux/irq.h>

#include <asm/mach-types.h>

#include <mach/hardware.h>

#include <mach/gtwx5715.h>

#include <asm/mach/pci.h>

#define GTWX5715_PCI_SLOT0_DEVID	0

#define GTWX5715_PCI_SLOT0_INTA_GPIO	10

#define GTWX5715_PCI_SLOT0_INTB_GPIO	11

#define GTWX5715_PCI_SLOT0_INTA_IRQ	IRQ_IXP4XX_GPIO10

#define GTWX5715_PCI_SLOT0_INTB_IRQ	IRQ_IXP4XX_GPIO11

#define GTWX5715_PCI_SLOT1_DEVID	1

#define GTWX5715_PCI_SLOT1_INTA_GPIO	11

#define GTWX5715_PCI_SLOT1_INTB_GPIO	10

#define GTWX5715_PCI_SLOT1_INTA_IRQ	IRQ_IXP4XX_GPIO11

#define GTWX5715_PCI_SLOT1_INTB_IRQ	IRQ_IXP4XX_GPIO10

#define GTWX5715_PCI_SLOT_COUNT		2

#define GTWX5715_PCI_INT_PIN_COUNT	2

/*

 * The exact GPIO pins and IRQs are defined in arch-ixp4xx/gtwx5715.h

 * Slot 0 isn't actually populated with a card connector but

 * we initialize it anyway in case a future version has the

 * slot populated or someone with good soldering skills has

#include <linux/tty.h>

#include <linux/serial_8250.h>

#include <linux/slab.h>

#include <asm/types.h>

#include <asm/setup.h>

#include <asm/memory.h>

#include <asm/mach-types.h>

#include <asm/mach/arch.h>

#include <asm/mach/flash.h>

#include <mach/gtwx5715.h>

/* GPIO 5,6,7 and 12 are hard wired to the Kendin KS8995M Switch

   and operate as an SPI type interface.  The details of the interface

   are available on Kendin/Micrel's web site. */

#define GTWX5715_KSSPI_SELECT	5

#define GTWX5715_KSSPI_TXD	6

#define GTWX5715_KSSPI_CLOCK	7

#define GTWX5715_KSSPI_RXD	12

/* The "reset" button is wired to GPIO 3.

   The GPIO is brought "low" when the button is pushed. */

#define GTWX5715_BUTTON_GPIO	3

/* Board Label      Front Label

   LED1             Power

   LED2             Wireless-G

   LED3             not populated but could be

   LED4             Internet

   LED5 - LED8      Controlled by KS8995M Switch

   LED9             DMZ */

#define GTWX5715_LED1_GPIO	2

#define GTWX5715_LED2_GPIO	9

#define GTWX5715_LED3_GPIO	8

#define GTWX5715_LED4_GPIO	1

#define GTWX5715_LED9_GPIO	4

/*

 * Xscale UART registers are 32 bits wide with only the least

/*

 * arch/arm/mach-ixp4xx/include/mach/gtwx5715.h

 *

 * Gemtek GTWX5715 Gateway (Linksys WRV54G)

 *

 * Copyright 2004 (c) George T. Joseph

 *

 * This program is free software; you can redistribute it and/or

 * modify it under the terms of the GNU General Public License

 * as published by the Free Software Foundation; either version 2

 * of the License, or (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 * You should have received a copy of the GNU General Public License

 * along with this program; if not, write to the Free Software

 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.

 */

#ifndef __ASM_ARCH_HARDWARE_H__

#error "Do not include this directly, instead #include <mach/hardware.h>"

#endif

#include "irqs.h"

#define GTWX5715_GPIO0	0

#define GTWX5715_GPIO1	1

#define GTWX5715_GPIO2	2

#define GTWX5715_GPIO3	3

#define GTWX5715_GPIO4	4

#define GTWX5715_GPIO5	5

#define GTWX5715_GPIO6	6

#define GTWX5715_GPIO7	7

#define GTWX5715_GPIO8	8

#define GTWX5715_GPIO9	9

#define GTWX5715_GPIO10	10

#define GTWX5715_GPIO11	11

#define GTWX5715_GPIO12	12

#define GTWX5715_GPIO13	13

#define GTWX5715_GPIO14	14

#define GTWX5715_GPIO0_IRQ			IRQ_IXP4XX_GPIO0

#define GTWX5715_GPIO1_IRQ			IRQ_IXP4XX_GPIO1

#define GTWX5715_GPIO2_IRQ			IRQ_IXP4XX_GPIO2

#define GTWX5715_GPIO3_IRQ			IRQ_IXP4XX_GPIO3

#define GTWX5715_GPIO4_IRQ			IRQ_IXP4XX_GPIO4

#define GTWX5715_GPIO5_IRQ			IRQ_IXP4XX_GPIO5

#define GTWX5715_GPIO6_IRQ			IRQ_IXP4XX_GPIO6

#define GTWX5715_GPIO7_IRQ			IRQ_IXP4XX_GPIO7

#define GTWX5715_GPIO8_IRQ			IRQ_IXP4XX_GPIO8

#define GTWX5715_GPIO9_IRQ			IRQ_IXP4XX_GPIO9

#define GTWX5715_GPIO10_IRQ		IRQ_IXP4XX_GPIO10

#define GTWX5715_GPIO11_IRQ		IRQ_IXP4XX_GPIO11

#define GTWX5715_GPIO12_IRQ		IRQ_IXP4XX_GPIO12

#define GTWX5715_GPIO13_IRQ		IRQ_IXP4XX_SW_INT1

#define GTWX5715_GPIO14_IRQ		IRQ_IXP4XX_SW_INT2

/* PCI controller GPIO to IRQ pin mappings

			INTA	INTB

SLOT 0	10		11

SLOT 1	11		10

*/

#define	GTWX5715_PCI_SLOT0_DEVID	0

#define	GTWX5715_PCI_SLOT0_INTA_GPIO	GTWX5715_GPIO10

#define	GTWX5715_PCI_SLOT0_INTB_GPIO	GTWX5715_GPIO11

#define	GTWX5715_PCI_SLOT0_INTA_IRQ	GTWX5715_GPIO10_IRQ

#define	GTWX5715_PCI_SLOT0_INTB_IRQ	GTWX5715_GPIO11_IRQ

#define	GTWX5715_PCI_SLOT1_DEVID	1

#define	GTWX5715_PCI_SLOT1_INTA_GPIO	GTWX5715_GPIO11

#define	GTWX5715_PCI_SLOT1_INTB_GPIO	GTWX5715_GPIO10

#define	GTWX5715_PCI_SLOT1_INTA_IRQ	GTWX5715_GPIO11_IRQ

#define	GTWX5715_PCI_SLOT1_INTB_IRQ	GTWX5715_GPIO10_IRQ

#define GTWX5715_PCI_SLOT_COUNT			2

#define GTWX5715_PCI_INT_PIN_COUNT		2

/*

 * GPIO 5,6,7 and12 are hard wired to the Kendin KS8995M Switch

 * and operate as an SPI type interface.  The details of the interface

 * are available on Kendin/Micrel's web site.

 */

#define GTWX5715_KSSPI_SELECT	GTWX5715_GPIO5

#define GTWX5715_KSSPI_TXD		GTWX5715_GPIO6

#define GTWX5715_KSSPI_CLOCK	GTWX5715_GPIO7

#define GTWX5715_KSSPI_RXD		GTWX5715_GPIO12

/*

 * The "reset" button is wired to GPIO 3.

 * The GPIO is brought "low" when the button is pushed.

 */

#define GTWX5715_BUTTON_GPIO	GTWX5715_GPIO3

#define GTWX5715_BUTTON_IRQ	GTWX5715_GPIO3_IRQ

/*

 *  Board Label      Front Label

 *  LED1             Power

 *  LED2             Wireless-G

 *  LED3             not populated but could be

 *  LED4             Internet

 *  LED5 - LED8      Controlled by KS8995M Switch

 *  LED9             DMZ

 */

#define GTWX5715_LED1_GPIO		GTWX5715_GPIO2

#define GTWX5715_LED2_GPIO		GTWX5715_GPIO9

#define GTWX5715_LED3_GPIO		GTWX5715_GPIO8

#define GTWX5715_LED4_GPIO		GTWX5715_GPIO1

#define GTWX5715_LED9_GPIO		GTWX5715_GPIO4