Commit a41c653d authored by Jakub Kicinski's avatar Jakub Kicinski
Browse files

Merge branch 'net-phy-micrel-add-coma-mode-support'

Michael Walle says:

====================
net: phy: micrel: add coma mode support

Add support to disable coma mode by a GPIO line.
====================

Link: https://lore.kernel.org/r/20220427214406.1348872-1-michael@walle.cc


Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parents 17d49e6e 738871b0
Loading
Loading
Loading
Loading
+9 −0
Original line number Diff line number Diff line
@@ -45,3 +45,12 @@ Optional properties:

	In fiber mode, auto-negotiation is disabled and the PHY can only work in
	100base-fx (full and half duplex) modes.

 - coma-mode-gpios: If present the given gpio will be deasserted when the
		    PHY is probed.

	Some PHYs have a COMA mode input pin which puts the PHY into
	isolate and power-down mode. On some boards this input is connected
	to a GPIO of the SoC.

	Supported on the LAN8814.
+28 −4
Original line number Diff line number Diff line
@@ -32,6 +32,7 @@
#include <linux/ptp_clock.h>
#include <linux/ptp_classify.h>
#include <linux/net_tstamp.h>
#include <linux/gpio/consumer.h>

/* Operation Mode Strap Override */
#define MII_KSZPHY_OMSO				0x16
@@ -2729,6 +2730,10 @@ static void lan8814_ptp_init(struct phy_device *phydev)
	struct kszphy_ptp_priv *ptp_priv = &priv->ptp_priv;
	u32 temp;

	if (!IS_ENABLED(CONFIG_PTP_1588_CLOCK) ||
	    !IS_ENABLED(CONFIG_NETWORK_PHY_TIMESTAMPING))
		return;

	lanphy_write_page_reg(phydev, 5, TSU_HARD_RESET, TSU_HARD_RESET_);

	temp = lanphy_read_page_reg(phydev, 5, PTP_TX_MOD);
@@ -2767,6 +2772,10 @@ static int lan8814_ptp_probe_once(struct phy_device *phydev)
{
	struct lan8814_shared_priv *shared = phydev->shared->priv;

	if (!IS_ENABLED(CONFIG_PTP_1588_CLOCK) ||
	    !IS_ENABLED(CONFIG_NETWORK_PHY_TIMESTAMPING))
		return 0;

	/* Initialise shared lock for clock*/
	mutex_init(&shared->shared_lock);

@@ -2829,6 +2838,21 @@ static int lan8814_config_init(struct phy_device *phydev)
	return 0;
}

static int lan8814_release_coma_mode(struct phy_device *phydev)
{
	struct gpio_desc *gpiod;

	gpiod = devm_gpiod_get_optional(&phydev->mdio.dev, "coma-mode",
					GPIOD_OUT_HIGH_OPEN_DRAIN);
	if (IS_ERR(gpiod))
		return PTR_ERR(gpiod);

	gpiod_set_consumer_name(gpiod, "LAN8814 coma mode");
	gpiod_set_value_cansleep(gpiod, 0);

	return 0;
}

static int lan8814_probe(struct phy_device *phydev)
{
	struct kszphy_priv *priv;
@@ -2843,10 +2867,6 @@ static int lan8814_probe(struct phy_device *phydev)

	phydev->priv = priv;

	if (!IS_ENABLED(CONFIG_PTP_1588_CLOCK) ||
	    !IS_ENABLED(CONFIG_NETWORK_PHY_TIMESTAMPING))
		return 0;

	/* Strap-in value for PHY address, below register read gives starting
	 * phy address value
	 */
@@ -2855,6 +2875,10 @@ static int lan8814_probe(struct phy_device *phydev)
			      addr, sizeof(struct lan8814_shared_priv));

	if (phy_package_init_once(phydev)) {
		err = lan8814_release_coma_mode(phydev);
		if (err)
			return err;

		err = lan8814_ptp_probe_once(phydev);
		if (err)
			return err;