dt-bindings: pinctrl: mediatek: add support for mt8188

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

%YAML 1.2

---

$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8188-pinctrl.yaml#

$schema: http://devicetree.org/meta-schemas/core.yaml#

title: MediaTek MT8188 Pin Controller

maintainers:

  - Hui Liu <hui.liu@mediatek.com>

description: |

  The MediaTek's MT8188 Pin controller is used to control SoC pins.

properties:

  compatible:

    const: mediatek,mt8188-pinctrl

  gpio-controller: true

  '#gpio-cells':

    description: |

      Number of cells in GPIO specifier, should be two. The first cell

      is the pin number, the second cell is used to specify optional

      parameters which are defined in <dt-bindings/gpio/gpio.h>.

    const: 2

  gpio-ranges:

    maxItems: 1

  gpio-line-names: true

  reg:

    items:

      - description: gpio registers base address

      - description: rm group io configuration registers base address

      - description: lt group io configuration registers base address

      - description: lm group io configuration registers base address

      - description: rt group io configuration registers base address

      - description: eint registers base address

  reg-names:

    items:

      - const: iocfg0

      - const: iocfg_rm

      - const: iocfg_lt

      - const: iocfg_lm

      - const: iocfg_rt

      - const: eint

  interrupt-controller: true

  '#interrupt-cells':

    const: 2

  interrupts:

    description: The interrupt outputs to sysirq.

    maxItems: 1

  mediatek,rsel-resistance-in-si-unit:

    type: boolean

    description: |

      We provide two methods to select the resistance for I2C when pull up or pull down.

      The first is by RSEL definition value, another one is by resistance value(ohm).

      This flag is used to identify if the method is resistance(si unit) value.

# PIN CONFIGURATION NODES

patternProperties:

  '-pins$':

    type: object

    additionalProperties: false

    patternProperties:

      '^pins':

        type: object

        $ref: "/schemas/pinctrl/pincfg-node.yaml"

        additionalProperties: false

        description: |

          A pinctrl node should contain at least one subnode representing the

          pinctrl groups available on the machine. Each subnode will list the

          pins it needs, and how they should be configured, with regard to muxer

          configuration, pullups, drive strength, input enable/disable and

          input schmitt.

        properties:

          pinmux:

            description: |

              Integer array, represents gpio pin number and mux setting.

              Supported pin number and mux varies for different SoCs, and are

              defined as macros in dt-bindings/pinctrl/mediatek,<soc>-pinfunc.h

              directly.

          drive-strength:

            enum: [2, 4, 6, 8, 10, 12, 14, 16]

          drive-strength-microamp:

            enum: [125, 250, 500, 1000]

          bias-pull-down:

            oneOf:

              - type: boolean

              - enum: [100, 101, 102, 103]

                description: mt8188 pull down PUPD/R0/R1 type define value.

              - enum: [200, 201, 202, 203, 204, 205, 206, 207]

                description: mt8188 pull down RSEL type define value.

              - enum: [75000, 5000]

                description: mt8188 pull down RSEL type si unit value(ohm).

            description: |

              For pull down type is normal, it doesn't need add RSEL & R1R0 define

              and resistance value.

              For pull down type is PUPD/R0/R1 type, it can add R1R0 define to

              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &

              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"

              define in mt8188.

              For pull down type is RSEL, it can add RSEL define & resistance value(ohm)

              to set different resistance by identifying property "mediatek,rsel-resistance-in-si-unit".

              It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"

              & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100"

              & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"

              define in mt8188. It can also support resistance value(ohm) "75000" & "5000" in mt8188.

          bias-pull-up:

            oneOf:

              - type: boolean

              - enum: [100, 101, 102, 103]

                description: mt8188 pull up PUPD/R0/R1 type define value.

              - enum: [200, 201, 202, 203, 204, 205, 206, 207]

                description: mt8188 pull up RSEL type define value.

              - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000]

                description: mt8188 pull up RSEL type si unit value(ohm).

            description: |

              For pull up type is normal, it don't need add RSEL & R1R0 define

              and resistance value.

              For pull up type is PUPD/R0/R1 type, it can add R1R0 define to

              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &

              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"

              define in mt8188.

              For pull up type is RSEL, it can add RSEL define & resistance value(ohm)

              to set different resistance by identifying property "mediatek,rsel-resistance-in-si-unit".

              It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"

              & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100"

              & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"

              define in mt8188. It can also support resistance value(ohm)

              "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8188.

          bias-disable: true

          output-high: true

          output-low: true

          input-enable: true

          input-disable: true

          input-schmitt-enable: true

          input-schmitt-disable: true

        required:

          - pinmux

required:

  - compatible

  - reg

  - interrupts

  - interrupt-controller

  - '#interrupt-cells'

  - gpio-controller

  - '#gpio-cells'

  - gpio-ranges

additionalProperties: false

examples:

  - |

    #include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>

    #include <dt-bindings/interrupt-controller/arm-gic.h>

    pio: pinctrl@10005000 {

        compatible = "mediatek,mt8188-pinctrl";

        reg = <0x10005000 0x1000>,

              <0x11c00000 0x1000>,

              <0x11e10000 0x1000>,

              <0x11e20000 0x1000>,

              <0x11ea0000 0x1000>,

              <0x1000b000 0x1000>;

        reg-names = "iocfg0", "iocfg_rm",

                    "iocfg_lt", "iocfg_lm", "iocfg_rt",

                    "eint";

        gpio-controller;

        #gpio-cells = <2>;

        gpio-ranges = <&pio 0 0 176>;

        interrupt-controller;

        interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH 0>;

        #interrupt-cells = <2>;

        pio-pins {

            pins {

                pinmux = <PINMUX_GPIO0__FUNC_B_GPIO0>;

                output-low;

            };

        };

        spi0-pins {

            pins-spi {

                pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,

                         <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,

                         <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>;

                drive-strength = <6>;

            };

            pins-spi-mi {

                pinmux = <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;

                bias-pull-down = <MTK_PUPD_SET_R1R0_10>;

            };

        };

        i2c0-pins {

            pins {

                pinmux = <PINMUX_GPIO55__FUNC_B1_SCL0>,

                         <PINMUX_GPIO56__FUNC_B1_SDA0>;

                bias-disable;

                drive-strength-microamp = <1000>;

            };

        };

    };