Commit 91dbd54e authored by Max Krummenacher's avatar Max Krummenacher Committed by Shawn Guo
Browse files

ARM: dts: imx6dl-colibri: Drop dedicated v1.1 device tree 



Drop Colibri V1.1 device tree, this is just a duplicate of Colibri V1.0
with the possibility to use SD cards in UHS mode if the carrier board
does not have 3.3V pull up resistor.

The dedicated device tree kept the feature switched of by setting
the no-1-8-v property and thus does not offer anything different
than what the regular device tree does.

Thus drop the dedicated device tree and merge the preparation to
allow enabling the feature should a carrier without pull ups
be used into the regular device tree.

Signed-off-by: default avatarMax Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent ba9fe460

arch/arm/boot/dts/Makefile

+0 −1
Original line number Diff line number Diff line
@@ -459,7 +459,6 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ 
	imx6dl-aristainetos2_4.dtb \

	imx6dl-aristainetos2_7.dtb \

	imx6dl-colibri-eval-v3.dtb \

	imx6dl-colibri-v1_1-eval-v3.dtb \

	imx6dl-cubox-i.dtb \

	imx6dl-cubox-i-emmc-som-v15.dtb \

	imx6dl-cubox-i-som-v15.dtb \

arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts

deleted100644 → 0
+0 −31
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0+ OR MIT

/*

 * Copyright 2020 Toradex

 */



/dts-v1/;



#include "imx6dl-colibri-eval-v3.dts"

#include "imx6qdl-colibri-v1_1-uhs.dtsi"



/ {

	model = "Toradex Colibri iMX6DL/S V1.1 on Colibri Evaluation Board V3";

	compatible = "toradex,colibri_imx6dl-v1_1-eval-v3",

		     "toradex,colibri_imx6dl-v1_1",

		     "toradex,colibri_imx6dl-eval-v3",

		     "toradex,colibri_imx6dl",

		     "fsl,imx6dl";

};



/* Colibri MMC */

&usdhc1 {

	status = "okay";

	/*

	 * Please make sure your carrier board does not pull-up any of

	 * the MMC/SD signals to 3.3 volt before attempting to activate

	 * UHS-I support.

	 * To let signaling voltage be changed to 1.8V, please

	 * delete no-1-8-v property (example below):

	 * /delete-property/no-1-8-v;

	 */

};

arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi

deleted100644 → 0
+0 −44
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0+ OR MIT

/*

 * Copyright 2020 Toradex

 */



&iomuxc {

	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {

		fsl,pins = <

			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170b1

			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100b1

			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1

			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1

			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1

			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1

		>;

	};



	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {

		fsl,pins = <

			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170f1

			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100f1

			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1

			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1

			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1

			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1

		>;

	};

};



/* Colibri MMC */

&usdhc1 {

	pinctrl-names = "default", "state_100mhz", "state_200mhz";

	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;

	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>;

	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>;

	vmmc-supply = <&reg_module_3v3>;

	vqmmc-supply = <&vgen3_reg>;

	wakeup-source;

	keep-power-in-suspend;

	sd-uhs-sdr12;

	sd-uhs-sdr25;

	sd-uhs-sdr50;

	sd-uhs-sdr104;

};

arch/arm/boot/dts/imx6qdl-colibri.dtsi

+27 −2
Original line number Diff line number Diff line
@@ -370,11 +370,14 @@ 


/* Colibri MMC */

&usdhc1 {

	pinctrl-names = "default";

	pinctrl-names = "default", "state_100mhz", "state_200mhz";

	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;

	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>;

	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>;

	cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */

	disable-wp;

	vqmmc-supply = <&reg_module_3v3>;

	vmmc-supply = <&reg_module_3v3>;

	vqmmc-supply = <&vgen3_reg>;

	bus-width = <4>;

	no-1-8-v;

	status = "disabled";
@@ -692,6 +695,28 @@ 
		>;

	};



	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {

		fsl,pins = <

			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170b1

			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100b1

			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1

			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1

			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1

			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1

		>;

	};



	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {

		fsl,pins = <

			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170f1

			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100f1

			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1

			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1

			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1

			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1

		>;

	};



	pinctrl_usdhc3: usdhc3grp {

		fsl,pins = <

			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059