Unverified Commit 90801b83 authored by openeuler-ci-bot's avatar openeuler-ci-bot Committed by Gitee
Browse files

!3062 backport SME from mainline 

Merge Pull Request from: @liaoyu15 
 
https://gitee.com/openeuler/kernel/issues/I8E73O

backport SME from mainline

 
 
Link:https://gitee.com/openeuler/kernel/pulls/3062

 

Reviewed-by: default avatarXie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: default avatarJialin Zhang <zhangjialin11@huawei.com>
parents caa45c11 c85fd214

Documentation/arm64/elf_hwcaps.rst

+34 −0
Original line number Diff line number Diff line
@@ -249,6 +249,40 @@ HWCAP2_ECV 


    Functionality implied by ID_AA64MMFR0_EL1.ECV == 0b0001.



HWCAP2_SME



    Functionality implied by ID_AA64PFR1_EL1.SME == 0b0001, as described

    by Documentation/arm64/sme.rst.



HWCAP2_SME_I16I64



    Functionality implied by ID_AA64SMFR0_EL1.I16I64 == 0b1111.



HWCAP2_SME_F64F64



    Functionality implied by ID_AA64SMFR0_EL1.F64F64 == 0b1.



HWCAP2_SME_I8I32



    Functionality implied by ID_AA64SMFR0_EL1.I8I32 == 0b1111.



HWCAP2_SME_F16F32



    Functionality implied by ID_AA64SMFR0_EL1.F16F32 == 0b1.



HWCAP2_SME_B16F32



    Functionality implied by ID_AA64SMFR0_EL1.B16F32 == 0b1.



HWCAP2_SME_F32F32



    Functionality implied by ID_AA64SMFR0_EL1.F32F32 == 0b1.



HWCAP2_SME_FA64



    Functionality implied by ID_AA64SMFR0_EL1.FA64 == 0b1.





HWCAP2_AFP



    Functionality implied by ID_AA64MFR1_EL1.AFP == 0b0001.

Documentation/arm64/index.rst

+1 −0
Original line number Diff line number Diff line
@@ -21,6 +21,7 @@ ARM64 Architecture 
    perf

    pointer-authentication

    silicon-errata

    sme

    sve

    tagged-address-abi

    tagged-pointers

Documentation/arm64/sme.rst

0 → 100644
+428 −0
Original line number Diff line number Diff line 
===================================================

Scalable Matrix Extension support for AArch64 Linux

===================================================



This document outlines briefly the interface provided to userspace by Linux in

order to support use of the ARM Scalable Matrix Extension (SME).



This is an outline of the most important features and issues only and not

intended to be exhaustive.  It should be read in conjunction with the SVE

documentation in sve.rst which provides details on the Streaming SVE mode

included in SME.



This document does not aim to describe the SME architecture or programmer's

model.  To aid understanding, a minimal description of relevant programmer's

model features for SME is included in Appendix A.





1.  General

-----------



* PSTATE.SM, PSTATE.ZA, the streaming mode vector length, the ZA

  register state and TPIDR2_EL0 are tracked per thread.



* The presence of SME is reported to userspace via HWCAP2_SME in the aux vector

  AT_HWCAP2 entry.  Presence of this flag implies the presence of the SME

  instructions and registers, and the Linux-specific system interfaces

  described in this document.  SME is reported in /proc/cpuinfo as "sme".



* Support for the execution of SME instructions in userspace can also be

  detected by reading the CPU ID register ID_AA64PFR1_EL1 using an MRS

  instruction, and checking that the value of the SME field is nonzero. [3]



  It does not guarantee the presence of the system interfaces described in the

  following sections: software that needs to verify that those interfaces are

  present must check for HWCAP2_SME instead.



* There are a number of optional SME features, presence of these is reported

  through AT_HWCAP2 through:



	HWCAP2_SME_I16I64

	HWCAP2_SME_F64F64

	HWCAP2_SME_I8I32

	HWCAP2_SME_F16F32

	HWCAP2_SME_B16F32

	HWCAP2_SME_F32F32

	HWCAP2_SME_FA64



  This list may be extended over time as the SME architecture evolves.



  These extensions are also reported via the CPU ID register ID_AA64SMFR0_EL1,

  which userspace can read using an MRS instruction.  See elf_hwcaps.txt and

  cpu-feature-registers.txt for details.



* Debuggers should restrict themselves to interacting with the target via the

  NT_ARM_SVE, NT_ARM_SSVE and NT_ARM_ZA regsets.  The recommended way

  of detecting support for these regsets is to connect to a target process

  first and then attempt a



	ptrace(PTRACE_GETREGSET, pid, NT_ARM_<regset>, &iov).



* Whenever ZA register values are exchanged in memory between userspace and

  the kernel, the register value is encoded in memory as a series of horizontal

  vectors from 0 to VL/8-1 stored in the same endianness invariant format as is

  used for SVE vectors.



* On thread creation TPIDR2_EL0 is preserved unless CLONE_SETTLS is specified,

  in which case it is set to 0.



2.  Vector lengths

------------------



SME defines a second vector length similar to the SVE vector length which is

controls the size of the streaming mode SVE vectors and the ZA matrix array.

The ZA matrix is square with each side having as many bytes as a streaming

mode SVE vector.





3.  Sharing of streaming and non-streaming mode SVE state

---------------------------------------------------------



It is implementation defined which if any parts of the SVE state are shared

between streaming and non-streaming modes.  When switching between modes

via software interfaces such as ptrace if no register content is provided as

part of switching no state will be assumed to be shared and everything will

be zeroed.





4.  System call behaviour

-------------------------



* On syscall PSTATE.ZA is preserved, if PSTATE.ZA==1 then the contents of the

  ZA matrix are preserved.



* On syscall PSTATE.SM will be cleared and the SVE registers will be handled

  as per the standard SVE ABI.



* Neither the SVE registers nor ZA are used to pass arguments to or receive

  results from any syscall.



* On process creation (eg, clone()) the newly created process will have

  PSTATE.SM cleared.



* All other SME state of a thread, including the currently configured vector

  length, the state of the PR_SME_VL_INHERIT flag, and the deferred vector

  length (if any), is preserved across all syscalls, subject to the specific

  exceptions for execve() described in section 6.





5.  Signal handling

-------------------



* Signal handlers are invoked with streaming mode and ZA disabled.



* A new signal frame record za_context encodes the ZA register contents on

  signal delivery. [1]



* The signal frame record for ZA always contains basic metadata, in particular

  the thread's vector length (in za_context.vl).



* The ZA matrix may or may not be included in the record, depending on

  the value of PSTATE.ZA.  The registers are present if and only if:

  za_context.head.size >= ZA_SIG_CONTEXT_SIZE(sve_vq_from_vl(za_context.vl))

  in which case PSTATE.ZA == 1.



* If matrix data is present, the remainder of the record has a vl-dependent

  size and layout.  Macros ZA_SIG_* are defined [1] to facilitate access to

  them.



* The matrix is stored as a series of horizontal vectors in the same format as

  is used for SVE vectors.



* If the ZA context is too big to fit in sigcontext.__reserved[], then extra

  space is allocated on the stack, an extra_context record is written in

  __reserved[] referencing this space.  za_context is then written in the

  extra space.  Refer to [1] for further details about this mechanism.





5.  Signal return

-----------------



When returning from a signal handler:



* If there is no za_context record in the signal frame, or if the record is

  present but contains no register data as described in the previous section,

  then ZA is disabled.



* If za_context is present in the signal frame and contains matrix data then

  PSTATE.ZA is set to 1 and ZA is populated with the specified data.



* The vector length cannot be changed via signal return.  If za_context.vl in

  the signal frame does not match the current vector length, the signal return

  attempt is treated as illegal, resulting in a forced SIGSEGV.





6.  prctl extensions

--------------------



Some new prctl() calls are added to allow programs to manage the SME vector

length:



prctl(PR_SME_SET_VL, unsigned long arg)



    Sets the vector length of the calling thread and related flags, where

    arg == vl | flags.  Other threads of the calling process are unaffected.



    vl is the desired vector length, where sve_vl_valid(vl) must be true.



    flags:



	PR_SME_VL_INHERIT



	    Inherit the current vector length across execve().  Otherwise, the

	    vector length is reset to the system default at execve().  (See

	    Section 9.)



	PR_SME_SET_VL_ONEXEC



	    Defer the requested vector length change until the next execve()

	    performed by this thread.



	    The effect is equivalent to implicit execution of the following

	    call immediately after the next execve() (if any) by the thread:



		prctl(PR_SME_SET_VL, arg & ~PR_SME_SET_VL_ONEXEC)



	    This allows launching of a new program with a different vector

	    length, while avoiding runtime side effects in the caller.



	    Without PR_SME_SET_VL_ONEXEC, the requested change takes effect

	    immediately.





    Return value: a nonnegative on success, or a negative value on error:

	EINVAL: SME not supported, invalid vector length requested, or

	    invalid flags.





    On success:



    * Either the calling thread's vector length or the deferred vector length

      to be applied at the next execve() by the thread (dependent on whether

      PR_SME_SET_VL_ONEXEC is present in arg), is set to the largest value

      supported by the system that is less than or equal to vl.  If vl ==

      SVE_VL_MAX, the value set will be the largest value supported by the

      system.



    * Any previously outstanding deferred vector length change in the calling

      thread is cancelled.



    * The returned value describes the resulting configuration, encoded as for

      PR_SME_GET_VL.  The vector length reported in this value is the new

      current vector length for this thread if PR_SME_SET_VL_ONEXEC was not

      present in arg; otherwise, the reported vector length is the deferred

      vector length that will be applied at the next execve() by the calling

      thread.



    * Changing the vector length causes all of ZA, P0..P15, FFR and all bits of

      Z0..Z31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become

      unspecified, including both streaming and non-streaming SVE state.

      Calling PR_SME_SET_VL with vl equal to the thread's current vector

      length, or calling PR_SME_SET_VL with the PR_SVE_SET_VL_ONEXEC flag,

      does not constitute a change to the vector length for this purpose.



    * Changing the vector length causes PSTATE.ZA and PSTATE.SM to be cleared.

      Calling PR_SME_SET_VL with vl equal to the thread's current vector

      length, or calling PR_SME_SET_VL with the PR_SVE_SET_VL_ONEXEC flag,

      does not constitute a change to the vector length for this purpose.





prctl(PR_SME_GET_VL)



    Gets the vector length of the calling thread.



    The following flag may be OR-ed into the result:



	PR_SME_VL_INHERIT



	    Vector length will be inherited across execve().



    There is no way to determine whether there is an outstanding deferred

    vector length change (which would only normally be the case between a

    fork() or vfork() and the corresponding execve() in typical use).



    To extract the vector length from the result, bitwise and it with

    PR_SME_VL_LEN_MASK.



    Return value: a nonnegative value on success, or a negative value on error:

	EINVAL: SME not supported.





7.  ptrace extensions

---------------------



* A new regset NT_ARM_SSVE is defined for access to streaming mode SVE

  state via PTRACE_GETREGSET and  PTRACE_SETREGSET, this is documented in

  sve.rst.



* A new regset NT_ARM_ZA is defined for ZA state for access to ZA state via

  PTRACE_GETREGSET and PTRACE_SETREGSET.



  Refer to [2] for definitions.



The regset data starts with struct user_za_header, containing:



    size



	Size of the complete regset, in bytes.

	This depends on vl and possibly on other things in the future.



	If a call to PTRACE_GETREGSET requests less data than the value of

	size, the caller can allocate a larger buffer and retry in order to

	read the complete regset.



    max_size



	Maximum size in bytes that the regset can grow to for the target

	thread.  The regset won't grow bigger than this even if the target

	thread changes its vector length etc.



    vl



	Target thread's current streaming vector length, in bytes.



    max_vl



	Maximum possible streaming vector length for the target thread.



    flags



	Zero or more of the following flags, which have the same

	meaning and behaviour as the corresponding PR_SET_VL_* flags:



	    SME_PT_VL_INHERIT



	    SME_PT_VL_ONEXEC (SETREGSET only).



* The effects of changing the vector length and/or flags are equivalent to

  those documented for PR_SME_SET_VL.



  The caller must make a further GETREGSET call if it needs to know what VL is

  actually set by SETREGSET, unless is it known in advance that the requested

  VL is supported.



* The size and layout of the payload depends on the header fields.  The

  SME_PT_ZA_*() macros are provided to facilitate access to the data.



* In either case, for SETREGSET it is permissible to omit the payload, in which

  case the vector length and flags are changed and PSTATE.ZA is set to 0

  (along with any consequences of those changes).  If a payload is provided

  then PSTATE.ZA will be set to 1.



* For SETREGSET, if the requested VL is not supported, the effect will be the

  same as if the payload were omitted, except that an EIO error is reported.

  No attempt is made to translate the payload data to the correct layout

  for the vector length actually set.  It is up to the caller to translate the

  payload layout for the actual VL and retry.



* The effect of writing a partial, incomplete payload is unspecified.





8.  ELF coredump extensions

---------------------------



* NT_ARM_SSVE notes will be added to each coredump for

  each thread of the dumped process.  The contents will be equivalent to the

  data that would have been read if a PTRACE_GETREGSET of the corresponding

  type were executed for each thread when the coredump was generated.



* A NT_ARM_ZA note will be added to each coredump for each thread of the

  dumped process.  The contents will be equivalent to the data that would have

  been read if a PTRACE_GETREGSET of NT_ARM_ZA were executed for each thread

  when the coredump was generated.





9.  System runtime configuration

--------------------------------



* To mitigate the ABI impact of expansion of the signal frame, a policy

  mechanism is provided for administrators, distro maintainers and developers

  to set the default vector length for userspace processes:



/proc/sys/abi/sme_default_vector_length



    Writing the text representation of an integer to this file sets the system

    default vector length to the specified value, unless the value is greater

    than the maximum vector length supported by the system in which case the

    default vector length is set to that maximum.



    The result can be determined by reopening the file and reading its

    contents.



    At boot, the default vector length is initially set to 32 or the maximum

    supported vector length, whichever is smaller and supported.  This

    determines the initial vector length of the init process (PID 1).



    Reading this file returns the current system default vector length.



* At every execve() call, the new vector length of the new process is set to

  the system default vector length, unless



    * PR_SME_VL_INHERIT (or equivalently SME_PT_VL_INHERIT) is set for the

      calling thread, or



    * a deferred vector length change is pending, established via the

      PR_SME_SET_VL_ONEXEC flag (or SME_PT_VL_ONEXEC).



* Modifying the system default vector length does not affect the vector length

  of any existing process or thread that does not make an execve() call.





Appendix A.  SME programmer's model (informative)

=================================================



This section provides a minimal description of the additions made by SME to the

ARMv8-A programmer's model that are relevant to this document.



Note: This section is for information only and not intended to be complete or

to replace any architectural specification.



A.1.  Registers

---------------



In A64 state, SME adds the following:



* A new mode, streaming mode, in which a subset of the normal FPSIMD and SVE

  features are available.  When supported EL0 software may enter and leave

  streaming mode at any time.



  For best system performance it is strongly encouraged for software to enable

  streaming mode only when it is actively being used.



* A new vector length controlling the size of ZA and the Z registers when in

  streaming mode, separately to the vector length used for SVE when not in

  streaming mode.  There is no requirement that either the currently selected

  vector length or the set of vector lengths supported for the two modes in

  a given system have any relationship.  The streaming mode vector length

  is referred to as SVL.



* A new ZA matrix register.  This is a square matrix of SVLxSVL bits.  Most

  operations on ZA require that streaming mode be enabled but ZA can be

  enabled without streaming mode in order to load, save and retain data.



  For best system performance it is strongly encouraged for software to enable

  ZA only when it is actively being used.



* Two new 1 bit fields in PSTATE which may be controlled via the SMSTART and

  SMSTOP instructions or by access to the SVCR system register:



  * PSTATE.ZA, if this is 1 then the ZA matrix is accessible and has valid

    data while if it is 0 then ZA can not be accessed.  When PSTATE.ZA is

    changed from 0 to 1 all bits in ZA are cleared.



  * PSTATE.SM, if this is 1 then the PE is in streaming mode.  When the value

    of PSTATE.SM is changed then it is implementation defined if the subset

    of the floating point register bits valid in both modes may be retained.

    Any other bits will be cleared.





References

==========



[1] arch/arm64/include/uapi/asm/sigcontext.h

    AArch64 Linux signal ABI definitions



[2] arch/arm64/include/uapi/asm/ptrace.h

    AArch64 Linux ptrace ABI definitions



[3] Documentation/arm64/cpu-feature-registers.rst

Documentation/arm64/sve.rst

+61 −11
Original line number Diff line number Diff line
@@ -7,7 +7,9 @@ Author: Dave Martin <Dave.Martin@arm.com> 
Date:   4 August 2017



This document outlines briefly the interface provided to userspace by Linux in

order to support use of the ARM Scalable Vector Extension (SVE).

order to support use of the ARM Scalable Vector Extension (SVE), including

interactions with Streaming SVE mode added by the Scalable Matrix Extension

(SME).



This is an outline of the most important features and issues only and not

intended to be exhaustive.
@@ -23,6 +25,10 @@ model features for SVE is included in Appendix A. 
* SVE registers Z0..Z31, P0..P15 and FFR and the current vector length VL, are

  tracked per-thread.



* In streaming mode FFR is not accessible unless HWCAP2_SME_FA64 is present

  in the system, when it is not supported and these interfaces are used to

  access streaming mode FFR is read and written as zero.



* The presence of SVE is reported to userspace via HWCAP_SVE in the aux vector

  AT_HWCAP entry.  Presence of this flag implies the presence of the SVE

  instructions and registers, and the Linux-specific system interfaces
@@ -53,10 +59,19 @@ model features for SVE is included in Appendix A. 
  which userspace can read using an MRS instruction.  See elf_hwcaps.txt and

  cpu-feature-registers.txt for details.



* On hardware that supports the SME extensions, HWCAP2_SME will also be

  reported in the AT_HWCAP2 aux vector entry.  Among other things SME adds

  streaming mode which provides a subset of the SVE feature set using a

  separate SME vector length and the same Z/V registers.  See sme.rst

  for more details.



* Debuggers should restrict themselves to interacting with the target via the

  NT_ARM_SVE regset.  The recommended way of detecting support for this regset

  is to connect to a target process first and then attempt a

  ptrace(PTRACE_GETREGSET, pid, NT_ARM_SVE, &iov).

  ptrace(PTRACE_GETREGSET, pid, NT_ARM_SVE, &iov).  Note that when SME is

  present and streaming SVE mode is in use the FPSIMD subset of registers

  will be read via NT_ARM_SVE and NT_ARM_SVE writes will exit streaming mode

  in the target.



* Whenever SVE scalable register values (Zn, Pn, FFR) are exchanged in memory

  between userspace and the kernel, the register value is encoded in memory in
@@ -126,6 +141,11 @@ the SVE instruction set architecture. 
  are only present in fpsimd_context.  For convenience, the content of V0..V31

  is duplicated between sve_context and fpsimd_context.



* The record contains a flag field which includes a flag SVE_SIG_FLAG_SM which

  if set indicates that the thread is in streaming mode and the vector length

  and register data (if present) describe the streaming SVE data and vector

  length.



* The signal frame record for SVE always contains basic metadata, in particular

  the thread's vector length (in sve_context.vl).
@@ -170,6 +190,11 @@ When returning from a signal handler: 
  the signal frame does not match the current vector length, the signal return

  attempt is treated as illegal, resulting in a forced SIGSEGV.



* It is permitted to enter or leave streaming mode by setting or clearing

  the SVE_SIG_FLAG_SM flag but applications should take care to ensure that

  when doing so sve_context.vl and any register data are appropriate for the

  vector length in the new mode.





6.  prctl extensions

--------------------
@@ -255,7 +280,7 @@ prctl(PR_SVE_GET_VL) 
    vector length change (which would only normally be the case between a

    fork() or vfork() and the corresponding execve() in typical use).



    To extract the vector length from the result, and it with

    To extract the vector length from the result, bitwise and it with

    PR_SVE_VL_LEN_MASK.



    Return value: a nonnegative value on success, or a negative value on error:
@@ -265,8 +290,14 @@ prctl(PR_SVE_GET_VL) 
7.  ptrace extensions

---------------------



* A new regset NT_ARM_SVE is defined for use with PTRACE_GETREGSET and

  PTRACE_SETREGSET.

* New regsets NT_ARM_SVE and NT_ARM_SSVE are defined for use with

  PTRACE_GETREGSET and PTRACE_SETREGSET. NT_ARM_SSVE describes the

  streaming mode SVE registers and NT_ARM_SVE describes the

  non-streaming mode SVE registers.



  In this description a register set is referred to as being "live" when

  the target is in the appropriate streaming or non-streaming mode and is

  using data beyond the subset shared with the FPSIMD Vn registers.



  Refer to [2] for definitions.
@@ -297,7 +328,7 @@ The regset data starts with struct user_sve_header, containing: 


    flags



	either

	at most one of



	    SVE_PT_REGS_FPSIMD
@@ -331,6 +362,10 @@ The regset data starts with struct user_sve_header, containing: 


	    SVE_PT_VL_ONEXEC (SETREGSET only).



	If neither FPSIMD nor SVE flags are provided then no register

	payload is available, this is only possible when SME is implemented.





* The effects of changing the vector length and/or flags are equivalent to

  those documented for PR_SVE_SET_VL.
@@ -346,6 +381,13 @@ The regset data starts with struct user_sve_header, containing: 
  case only the vector length and flags are changed (along with any

  consequences of those changes).



* In systems supporting SME when in streaming mode a GETREGSET for

  NT_REG_SVE will return only the user_sve_header with no register data,

  similarly a GETREGSET for NT_REG_SSVE will not return any register data

  when not in streaming mode.



* A GETREGSET for NT_ARM_SSVE will never return SVE_PT_REGS_FPSIMD.



* For SETREGSET, if an SVE_PT_REGS_SVE payload is present and the

  requested VL is not supported, the effect will be the same as if the

  payload were omitted, except that an EIO error is reported.  No
@@ -355,17 +397,25 @@ The regset data starts with struct user_sve_header, containing: 
  unspecified.  It is up to the caller to translate the payload layout

  for the actual VL and retry.



* Where SME is implemented it is not possible to GETREGSET the register

  state for normal SVE when in streaming mode, nor the streaming mode

  register state when in normal mode, regardless of the implementation defined

  behaviour of the hardware for sharing data between the two modes.



* Any SETREGSET of NT_ARM_SVE will exit streaming mode if the target was in

  streaming mode and any SETREGSET of NT_ARM_SSVE will enter streaming mode

  if the target was not in streaming mode.



* The effect of writing a partial, incomplete payload is unspecified.





8.  ELF coredump extensions

---------------------------



* A NT_ARM_SVE note will be added to each coredump for each thread of the

  dumped process.  The contents will be equivalent to the data that would have

  been read if a PTRACE_GETREGSET of NT_ARM_SVE were executed for each thread

  when the coredump was generated.



* NT_ARM_SVE and NT_ARM_SSVE notes will be added to each coredump for

  each thread of the dumped process.  The contents will be equivalent to the

  data that would have been read if a PTRACE_GETREGSET of the corresponding

  type were executed for each thread when the coredump was generated.



9.  System runtime configuration

--------------------------------

arch/arm64/Kconfig

+11 −0
Original line number Diff line number Diff line
@@ -1991,6 +1991,17 @@ config ARM64_SVE 
	  Thus, you will need to enable CONFIG_ARM64_VHE if you want to support

	  KVM in the same kernel image.



config ARM64_SME

	bool "ARM Scalable Matrix Extension support"

	default y

	depends on ARM64_SVE

	help

	  The Scalable Matrix Extension (SME) is an extension to the AArch64

	  execution state which utilises a substantial subset of the SVE

	  instruction set, together with the addition of new architectural

	  register state capable of holding two dimensional matrix tiles to

	  enable various matrix operations.



config ARM64_MODULE_PLTS

	bool "Use PLTs to allow module memory to spill over into vmalloc area"

	depends on MODULES