Commit 8f454b2f authored by Bryan O'Donoghue's avatar Bryan O'Donoghue Committed by Kalle Valo
Browse files

wcn36xx: Add Supported rates V1 structure 



This commit adds the supported rates V1 structure as defined in Prima
riva/inc/wlan_hal_msg.h

Signed-off-by: default avatarBryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200829033846.2167619-9-bryan.odonoghue@linaro.org
parent ff11d0c9

drivers/net/wireless/ath/wcn36xx/hal.h

+70 −0
Original line number Diff line number Diff line
@@ -1413,6 +1413,76 @@ struct wcn36xx_hal_config_sta_req_msg { 
	struct wcn36xx_hal_config_sta_params sta_params;

} __packed;



struct wcn36xx_hal_supported_rates_v1 {

	/* For Self STA Entry: this represents Self Mode.

	 * For Peer Stations, this represents the mode of the peer.

	 * On Station:

	 *

	 * --this mode is updated when PE adds the Self Entry.

	 *

	 * -- OR when PE sends 'ADD_BSS' message and station context in BSS

	 *    is used to indicate the mode of the AP.

	 *

	 * ON AP:

	 *

	 * -- this mode is updated when PE sends 'ADD_BSS' and Sta entry

	 *     for that BSS is used to indicate the self mode of the AP.

	 *

	 * -- OR when a station is associated, PE sends 'ADD_STA' message

	 *    with this mode updated.

	 */



	enum sta_rate_mode op_rate_mode;



	/* 11b, 11a and aniLegacyRates are IE rates which gives rate in

	 * unit of 500Kbps

	 */

	u16 dsss_rates[WCN36XX_HAL_NUM_DSSS_RATES];

	u16 ofdm_rates[WCN36XX_HAL_NUM_OFDM_RATES];

	u16 legacy_rates[WCN36XX_HAL_NUM_POLARIS_RATES];

	u16 reserved;



	/* Taurus only supports 26 Titan Rates(no ESF/concat Rates will be

	 * supported) First 26 bits are reserved for those Titan rates and

	 * the last 4 bits(bit28-31) for Taurus, 2(bit26-27) bits are

	 * reserved

	 * Titan and Taurus Rates

	 */

	u32 enhanced_rate_bitmap;



	/* 0-76 bits used, remaining reserved

	 * bits 0-15 and 32 should be set.

	 */

	u8 supported_mcs_set[WCN36XX_HAL_MAC_MAX_SUPPORTED_MCS_SET];



	/* RX Highest Supported Data Rate defines the highest data

	 * rate that the STA is able to receive, in unites of 1Mbps.

	 * This value is derived from "Supported MCS Set field" inside

	 * the HT capability element.

	 */

	u16 rx_highest_data_rate;



	/* Indicates the Maximum MCS that can be received for each spatial

	 * stream.

	 */

	u16 vht_rx_mcs_map;



	/* Indicates the highest VHT data rate that the STA is able to

	 * receive.

	 */

	u16 vht_rx_highest_data_rate;



	/* Indicates the Maximum MCS that can be transmitted for each spatial

	 * stream.

	 */

	u16 vht_tx_mcs_map;



	/* Indicates the highest VHT data rate that the STA is able to

	 * transmit.

	 */

	u16 vht_tx_highest_data_rate;

} __packed;



struct wcn36xx_hal_config_sta_params_v1 {

	/* BSSID of STA */

	u8 bssid[ETH_ALEN];