Commit 7ff7c992 authored by Ioana Ciornei's avatar Ioana Ciornei Committed by Jakub Kicinski
Browse files

dt-bindings: net: sff,sfp: rename example dt nodes to be more generic 



Rename the dt nodes shown in the sff,sfp.yaml examples so that they are
generic and not really tied to a specific platform.

Signed-off-by: default avatarIoana Ciornei <ioana.ciornei@nxp.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent 70991f1e

Documentation/devicetree/bindings/net/sff,sfp.yaml

+9 −9
Original line number Diff line number Diff line
@@ -89,7 +89,7 @@ examples: 
  - | # Direct serdes to SFP connection

    #include <dt-bindings/gpio/gpio.h>



    sfp_eth3: sfp-eth3 {

    sfp1: sfp {

      compatible = "sff,sfp";

      i2c-bus = <&sfp_1g_i2c>;

      los-gpios = <&cpm_gpio2 22 GPIO_ACTIVE_HIGH>;
@@ -101,19 +101,19 @@ examples: 
      tx-fault-gpios = <&cpm_gpio2 19 GPIO_ACTIVE_HIGH>;

    };



    cps_emac3 {

    ethernet {

      phy-names = "comphy";

      phys = <&cps_comphy5 0>;

      sfp = <&sfp_eth3>;

      sfp = <&sfp1>;

    };



  - | # Serdes to PHY to SFP connection

    #include <dt-bindings/gpio/gpio.h>

    #include <dt-bindings/interrupt-controller/arm-gic.h>



    sfp_eth0: sfp-eth0 {

    sfp2: sfp {

      compatible = "sff,sfp";

      i2c-bus = <&sfpp0_i2c>;

      i2c-bus = <&sfp_i2c>;

      los-gpios = <&cps_gpio1 28 GPIO_ACTIVE_HIGH>;

      mod-def0-gpios = <&cps_gpio1 27 GPIO_ACTIVE_LOW>;

      pinctrl-names = "default";
@@ -126,17 +126,17 @@ examples: 
      #address-cells = <1>;

      #size-cells = <0>;



      p0_phy: ethernet-phy@0 {

      phy: ethernet-phy@0 {

        compatible = "ethernet-phy-ieee802.3-c45";

        pinctrl-names = "default";

        pinctrl-0 = <&cpm_phy0_pins &cps_phy0_pins>;

        reg = <0>;

        interrupt = <&cpm_gpio2 18 IRQ_TYPE_EDGE_FALLING>;

        sfp = <&sfp_eth0>;

        sfp = <&sfp2>;

      };

    };



    cpm_eth0 {

      phy = <&p0_phy>;

    ethernet {

      phy = <&phy>;

      phy-mode = "10gbase-kr";

    };