Commit 7e76f82a authored by Marek Vasut's avatar Marek Vasut Committed by Alexandre Torgue
Browse files

ARM: dts: stm32: Split Avenger96 into DHCOR SoM and Avenger96 board 



The Avenger96 is in fact an assembly of DH Electronics DHCOR SoM on top
of an Avenger96 reference board. The DHCOR SoM can be populated with any
STM32MP15xx. Split the DTs to reflect this such that the common SoM and
Avenger96 parts are now in stm32mp15xx-dhcor-*dtsi and a specific example
implementation of STM32MP157A SoM and Avenger96 board is separated into
stm32mp157a-dhcor-*dts* . The stm32mp157a-avenger96.dts is retained for
the sake of backward naming compatibility.

Signed-off-by: default avatarMarek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Reviewed-by: default avatarManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: default avatarAlexandre Torgue <alexandre.torgue@st.com>
parent 604536dc

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -1029,6 +1029,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ 
	stm32h743i-eval.dtb \

	stm32h743i-disco.dtb \

	stm32mp157a-avenger96.dtb \

	stm32mp157a-dhcor-avenger96.dtb \

	stm32mp157a-dk1.dtb \

	stm32mp157a-iot-box.dtb \

	stm32mp157a-stinger96.dtb \

arch/arm/boot/dts/stm32mp157a-avenger96.dts

+3 −615
Original line number Diff line number Diff line
@@ -2,622 +2,10 @@ 
/*

 * Copyright (C) Linaro Ltd 2019 - All Rights Reserved

 * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

 * Copyright (C) 2020 Marek Vasut <marex@denx.de>

 */



/dts-v1/;



#include "stm32mp157.dtsi"

#include "stm32mp15-pinctrl.dtsi"

#include "stm32mp15xxac-pinctrl.dtsi"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/mfd/st,stpmic1.h>



/ {

	model = "Arrow Electronics STM32MP157A Avenger96 board";

	compatible = "arrow,stm32mp157a-avenger96", "st,stm32mp157";



	aliases {

		ethernet0 = &ethernet0;

		mmc0 = &sdmmc1;

		serial0 = &uart4;

		serial1 = &uart7;

		serial2 = &usart2;

		spi0 = &qspi;

	};



	/* XTal Q1 */

	cec_clock: clk-cec-fixed {

		#clock-cells = <0>;

		compatible = "fixed-clock";

		clock-frequency = <24000000>;

	};



	chosen {

		stdout-path = "serial0:115200n8";

	};



	hdmi-out {

		compatible = "hdmi-connector";

		type = "a";



		port {

			hdmi_con: endpoint {

				remote-endpoint = <&adv7513_out>;

			};

		};

	};



	memory@c0000000 {

		device_type = "memory";

		reg = <0xc0000000 0x40000000>;

	};



	led {

		compatible = "gpio-leds";

		led1 {

			label = "green:user0";

			gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "heartbeat";

			default-state = "off";

		};



		led2 {

			label = "green:user1";

			gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "mmc0";

			default-state = "off";

		};



		led3 {

			label = "green:user2";

			gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "mmc1";

			default-state = "off";

		};



		led4 {

			label = "green:user3";

			gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "none";

			default-state = "off";

			panic-indicator;

		};

	};



	sd_switch: regulator-sd_switch {

		compatible = "regulator-gpio";

		regulator-name = "sd_switch";

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <2900000>;

		regulator-type = "voltage";

		regulator-always-on;



		gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>;

		gpios-states = <0>;

		states = <1800000 0x1>,

			 <2900000 0x0>;

	};



	sound {

		compatible = "audio-graph-card";

		label = "STM32MP1-AV96-HDMI";

		dais = <&sai2a_port>;

		status = "okay";

	};



	/* Enpirion EP3A8LQI U2 on the DHCOR */

	vdd_io: regulator-buck-io {

		compatible = "regulator-fixed";

		regulator-name = "buck-io";

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <1800000>;

		regulator-always-on;

		regulator-boot-on;

		vin-supply = <&vdd>;

	};



	wlan_pwr: regulator-wlan {

		compatible = "regulator-fixed";



		regulator-name = "wl-reg";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;



		gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>;

		enable-active-high;

	};

};



&adc {

	pinctrl-names = "default";

	pinctrl-0 = <&adc12_ain_pins_b>;

	vdd-supply = <&vdd>;

	vdda-supply = <&vdda>;

	vref-supply = <&vdda>;

	status = "okay";



	adc1: adc@0 {

		st,adc-channels = <0 1 6>;

		st,min-sample-time-nsecs = <5000>;

		status = "okay";

	};



	adc2: adc@100 {

		st,adc-channels = <0 1 2>;

		st,min-sample-time-nsecs = <5000>;

		status = "okay";

	};

};



&ethernet0 {

	status = "okay";

	pinctrl-0 = <&ethernet0_rgmii_pins_c>;

	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_c>;

	pinctrl-names = "default", "sleep";

	phy-mode = "rgmii";

	max-speed = <1000>;

	phy-handle = <&phy0>;



	mdio0 {

		#address-cells = <1>;

		#size-cells = <0>;

		compatible = "snps,dwmac-mdio";

		reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;

		reset-delay-us = <1000>;



		phy0: ethernet-phy@7 {

			reg = <7>;



			rxc-skew-ps = <1500>;

			rxdv-skew-ps = <540>;

			rxd0-skew-ps = <420>;

			rxd1-skew-ps = <420>;

			rxd2-skew-ps = <420>;

			rxd3-skew-ps = <420>;



			txc-skew-ps = <1440>;

			txen-skew-ps = <540>;

			txd0-skew-ps = <420>;

			txd1-skew-ps = <420>;

			txd2-skew-ps = <420>;

			txd3-skew-ps = <420>;

		};

	};

};



&i2c1 {	/* X6 I2C1 */

	pinctrl-names = "default";

	pinctrl-0 = <&i2c1_pins_b>;

	i2c-scl-rising-time-ns = <185>;

	i2c-scl-falling-time-ns = <20>;

	status = "okay";

	/delete-property/dmas;

	/delete-property/dma-names;

};



&i2c2 {	/* X6 I2C2 */

	pinctrl-names = "default";

	pinctrl-0 = <&i2c2_pins_c>;

	i2c-scl-rising-time-ns = <185>;

	i2c-scl-falling-time-ns = <20>;

	status = "okay";

	/delete-property/dmas;

	/delete-property/dma-names;

};



&i2c4 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c4_pins_a>;

	i2c-scl-rising-time-ns = <185>;

	i2c-scl-falling-time-ns = <20>;

	status = "okay";

	/delete-property/dmas;

	/delete-property/dma-names;



	pmic: stpmic@33 {

		compatible = "st,stpmic1";

		reg = <0x33>;

		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;

		interrupt-controller;

		#interrupt-cells = <2>;

		status = "okay";



		regulators {

			compatible = "st,stpmic1-regulators";



			ldo1-supply = <&v3v3>;

			ldo2-supply = <&v3v3>;

			ldo3-supply = <&vdd_ddr>;

			ldo5-supply = <&v3v3>;

			ldo6-supply = <&v3v3>;

			pwr_sw1-supply = <&bst_out>;

			pwr_sw2-supply = <&bst_out>;



			vddcore: buck1 {

				regulator-name = "vddcore";

				regulator-min-microvolt = <1200000>;

				regulator-max-microvolt = <1350000>;

				regulator-always-on;

				regulator-initial-mode = <0>;

				regulator-over-current-protection;

			};



			vdd_ddr: buck2 {

				regulator-name = "vdd_ddr";

				regulator-min-microvolt = <1350000>;

				regulator-max-microvolt = <1350000>;

				regulator-always-on;

				regulator-initial-mode = <0>;

				regulator-over-current-protection;

			};



			vdd: buck3 {

				regulator-name = "vdd";

				regulator-min-microvolt = <2900000>;

				regulator-max-microvolt = <2900000>;

				regulator-always-on;

				regulator-initial-mode = <0>;

				regulator-over-current-protection;

			};



			v3v3: buck4 {

				regulator-name = "v3v3";

				regulator-min-microvolt = <3300000>;

				regulator-max-microvolt = <3300000>;

				regulator-always-on;

				regulator-over-current-protection;

				regulator-initial-mode = <0>;

			};



			vdda: ldo1 {

				regulator-name = "vdda";

				regulator-min-microvolt = <2900000>;

				regulator-max-microvolt = <2900000>;

				interrupts = <IT_CURLIM_LDO1 0>;

			};



			v2v8: ldo2 {

				regulator-name = "v2v8";

				regulator-min-microvolt = <2800000>;

				regulator-max-microvolt = <2800000>;

				interrupts = <IT_CURLIM_LDO2 0>;

			};



			vtt_ddr: ldo3 {

				regulator-name = "vtt_ddr";

				regulator-min-microvolt = <500000>;

				regulator-max-microvolt = <750000>;

				regulator-always-on;

				regulator-over-current-protection;

			};



			vdd_usb: ldo4 {

				regulator-name = "vdd_usb";

				interrupts = <IT_CURLIM_LDO4 0>;

			};



			vdd_sd: ldo5 {

				regulator-name = "vdd_sd";

				regulator-min-microvolt = <2900000>;

				regulator-max-microvolt = <2900000>;

				interrupts = <IT_CURLIM_LDO5 0>;

				regulator-boot-on;

			};



			v1v8: ldo6 {

				regulator-name = "v1v8";

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <1800000>;

				interrupts = <IT_CURLIM_LDO6 0>;

				regulator-enable-ramp-delay = <300000>;

			};



			vref_ddr: vref_ddr {

				regulator-name = "vref_ddr";

				regulator-always-on;

			};



			bst_out: boost {

				regulator-name = "bst_out";

				interrupts = <IT_OCP_BOOST 0>;

			};



			vbus_otg: pwr_sw1 {

				regulator-name = "vbus_otg";

				interrupts = <IT_OCP_OTG 0>;

				regulator-active-discharge = <1>;

			};



			vbus_sw: pwr_sw2 {

				regulator-name = "vbus_sw";

				interrupts = <IT_OCP_SWOUT 0>;

				regulator-active-discharge = <1>;

			};

		};



		onkey {

			compatible = "st,stpmic1-onkey";

			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;

			interrupt-names = "onkey-falling", "onkey-rising";

			status = "okay";

		};



		watchdog {

			compatible = "st,stpmic1-wdt";

			status = "disabled";

		};

	};



	hdmi-transmitter@3d {

		compatible = "adi,adv7513";

		reg = <0x3d>, <0x2d>, <0x4d>, <0x5d>;

		reg-names = "main", "cec", "edid", "packet";

		clocks = <&cec_clock>;

		clock-names = "cec";



		avdd-supply = <&v3v3>;

		dvdd-supply = <&v3v3>;

		pvdd-supply = <&v3v3>;

		dvdd-3v-supply = <&v3v3>;

		bgvdd-supply = <&v3v3>;



		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;

		interrupt-parent = <&gpiog>;



		status = "okay";



		adi,input-depth = <8>;

		adi,input-colorspace = "rgb";

		adi,input-clock = "1x";

		adi,input-style = <1>;

		adi,input-justification = "evenly";



		ports {

			#address-cells = <1>;

			#size-cells = <0>;



			port@0 {

				reg = <0>;

				adv7513_in: endpoint {

					remote-endpoint = <&ltdc_ep0_out>;

				};

			};



			port@1 {

				reg = <1>;

				adv7513_out: endpoint {

					remote-endpoint = <&hdmi_con>;

				};

			};



			port@2 {

				reg = <2>;

				adv7513_i2s0: endpoint {

					remote-endpoint = <&sai2a_endpoint>;

				};

			};

		};

	};



	eeprom@53 {

		compatible = "atmel,24c02";

		reg = <0x53>;

		pagesize = <16>;

	};

};



&iwdg2 {

	timeout-sec = <32>;

	status = "okay";

};



&ltdc {

	pinctrl-names = "default", "sleep";

	pinctrl-0 = <&ltdc_pins_d>;

	pinctrl-1 = <&ltdc_sleep_pins_d>;

	status = "okay";



	port {

		#address-cells = <1>;

		#size-cells = <0>;



		ltdc_ep0_out: endpoint@0 {

			reg = <0>;

			remote-endpoint = <&adv7513_in>;

		};

	};

};



&m_can1 {

	pinctrl-names = "default", "sleep";

	pinctrl-0 = <&m_can1_pins_b>;

	pinctrl-1 = <&m_can1_sleep_pins_b>;

	status = "disabled";

};



&m_can2 {

	pinctrl-names = "default", "sleep";

	pinctrl-0 = <&m_can2_pins_a>;

	pinctrl-1 = <&m_can2_sleep_pins_a>;

	status = "disabled";

};



&pwr_regulators {

	vdd-supply = <&vdd_io>;

	vdd_3v3_usbfs-supply = <&vdd_usb>;

};



&qspi {

	pinctrl-names = "default", "sleep";

	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;

	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;

	reg = <0x58003000 0x1000>, <0x70000000 0x200000>;

	#address-cells = <1>;

	#size-cells = <0>;

	status = "okay";



	flash0: spi-flash@0 {

		compatible = "jedec,spi-nor";

		reg = <0>;

		spi-rx-bus-width = <4>;

		spi-max-frequency = <108000000>;

		#address-cells = <1>;

		#size-cells = <1>;

	};

};



&rng1 {

	status = "okay";

};



&rtc {

	status = "okay";

};



&sai2 {

	clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;

	pinctrl-names = "default", "sleep";

	pinctrl-0 = <&sai2a_pins_c>;

	pinctrl-1 = <&sai2a_sleep_pins_c>;

	clock-names = "pclk", "x8k", "x11k";

	status = "okay";



	sai2a: audio-controller@4400b004 {

		#clock-cells = <0>;

		dma-names = "tx";

		clocks = <&rcc SAI2_K>;

		clock-names = "sai_ck";

		status = "okay";



		sai2a_port: port {

			sai2a_endpoint: endpoint {

				remote-endpoint = <&adv7513_i2s0>;

				format = "i2s";

				mclk-fs = <256>;

			};

		};

	};

};



&sdmmc1 {

	pinctrl-names = "default", "opendrain", "sleep";

	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>;

	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>;

	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>;

	cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;

	disable-wp;

	st,sig-dir;

	st,neg-edge;

	st,use-ckin;

	bus-width = <4>;

	vmmc-supply = <&vdd_sd>;

	vqmmc-supply = <&sd_switch>;

	status = "okay";

};



&sdmmc2 {

	pinctrl-names = "default", "opendrain", "sleep";

	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>;

	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_b>;

	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_b>;

	bus-width = <8>;

	mmc-ddr-1_8v;

	no-sd;

	no-sdio;

	non-removable;

	st,neg-edge;

	vmmc-supply = <&v3v3>;

	vqmmc-supply = <&vdd_io>;

	status = "okay";

};



&sdmmc3 {

	pinctrl-names = "default", "opendrain", "sleep";

	pinctrl-0 = <&sdmmc3_b4_pins_b>;

	pinctrl-1 = <&sdmmc3_b4_od_pins_b>;

	pinctrl-2 = <&sdmmc3_b4_sleep_pins_b>;

	broken-cd;

	non-removable;

	st,neg-edge;

	bus-width = <4>;

	vmmc-supply = <&wlan_pwr>;

	status = "okay";



	#address-cells = <1>;

	#size-cells = <0>;

	brcmf: bcrmf@1 {

		reg = <1>;

		compatible = "brcm,bcm4329-fmac";

	};

};



&spi2 {

	pinctrl-names = "default";

	pinctrl-0 = <&spi2_pins_a>;

	cs-gpios = <&gpioi 0 0>;

	status = "disabled";

	/delete-property/dmas;

	/delete-property/dma-names;

};



&uart4 {

	/* On Low speed expansion header */

	label = "LS-UART1";

	pinctrl-names = "default";

	pinctrl-0 = <&uart4_pins_b>;

	status = "okay";

};



&uart7 {

	/* On Low speed expansion header */

	label = "LS-UART0";

	pinctrl-names = "default";

	pinctrl-0 = <&uart7_pins_a>;

	status = "okay";

};



/* Bluetooth */

&usart2 {

	pinctrl-names = "default", "sleep";

	pinctrl-0 = <&usart2_pins_a>;

	pinctrl-1 = <&usart2_sleep_pins_a>;

	st,hw-flow-ctrl;

	status = "okay";



	bluetooth {

		compatible = "brcm,bcm43438-bt";

		max-speed = <3000000>;

		shutdown-gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>;

	};

};



&usbh_ehci {

	phys = <&usbphyc_port0>;

	phy-names = "usb";

	status = "okay";

};



&usbotg_hs {

	pinctrl-0 = <&usbotg_hs_pins_a>;

	pinctrl-names = "default";

	phy-names = "usb2-phy";

	phys = <&usbphyc_port1 0>;

	status = "okay";

	vbus-supply = <&vbus_otg>;

};



&usbphyc {

	status = "okay";

};



&usbphyc_port0 {

	phy-supply = <&vdd_usb>;

	vdda1v1-supply = <&reg11>;

	vdda1v8-supply = <&reg18>;

};



&usbphyc_port1 {

	phy-supply = <&vdd_usb>;

	vdda1v1-supply = <&reg11>;

	vdda1v8-supply = <&reg18>;

};
 
/* This DT is here only for backward compatibility */

#include "stm32mp157a-dhcor-avenger96.dts"

arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts

0 → 100644
+38 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)

/*

 * Copyright (C) Linaro Ltd 2019 - All Rights Reserved

 * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

 * Copyright (C) 2020 Marek Vasut <marex@denx.de>

 *

 * DHCOR STM32MP1 variant:

 * DHCR-STM32MP157A-C065-R102-V18-SPI-C-01LG

 * DHCOR PCB number: 586-100 or newer

 * Avenger96 PCB number: 588-200 or newer

 */



/dts-v1/;



#include "stm32mp157.dtsi"

#include "stm32mp15xc.dtsi"

#include "stm32mp15xx-dhcor-som.dtsi"

#include "stm32mp15xx-dhcor-avenger96.dtsi"



/ {

	model = "Arrow Electronics STM32MP157A Avenger96 board";

	compatible = "arrow,stm32mp157a-avenger96", "dh,stm32mp157a-dhcor-som",

		     "st,stm32mp157";

};



&m_can1 {

	pinctrl-names = "default", "sleep";

	pinctrl-0 = <&m_can1_pins_b>;

	pinctrl-1 = <&m_can1_sleep_pins_b>;

	status = "disabled";

};



&m_can2 {

	pinctrl-names = "default", "sleep";

	pinctrl-0 = <&m_can2_pins_a>;

	pinctrl-1 = <&m_can2_sleep_pins_a>;

	status = "disabled";

};

arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi

0 → 100644
+401 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)

/*

 * Copyright (C) Linaro Ltd 2019 - All Rights Reserved

 * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

 * Copyright (C) 2020 Marek Vasut <marex@denx.de>

 */



/* Avenger96 uses DHCOR SoM configured for 1V8 IO operation */

#include "stm32mp15xx-dhcor-io1v8.dtsi"



/ {

	aliases {

		ethernet0 = &ethernet0;

		mmc0 = &sdmmc1;

		serial0 = &uart4;

		serial1 = &uart7;

		serial2 = &usart2;

		spi0 = &qspi;

	};



	/* XTal Q1 */

	cec_clock: clk-cec-fixed {

		#clock-cells = <0>;

		compatible = "fixed-clock";

		clock-frequency = <24000000>;

	};



	chosen {

		stdout-path = "serial0:115200n8";

	};



	hdmi-out {

		compatible = "hdmi-connector";

		type = "a";



		port {

			hdmi_con: endpoint {

				remote-endpoint = <&adv7513_out>;

			};

		};

	};



	led {

		compatible = "gpio-leds";

		led1 {

			label = "green:user0";

			gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "heartbeat";

			default-state = "off";

		};



		led2 {

			label = "green:user1";

			gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "mmc0";

			default-state = "off";

		};



		led3 {

			label = "green:user2";

			gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "mmc1";

			default-state = "off";

		};



		led4 {

			label = "green:user3";

			gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "none";

			default-state = "off";

			panic-indicator;

		};

	};



	sd_switch: regulator-sd_switch {

		compatible = "regulator-gpio";

		regulator-name = "sd_switch";

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <2900000>;

		regulator-type = "voltage";

		regulator-always-on;



		gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>;

		gpios-states = <0>;

		states = <1800000 0x1>,

			 <2900000 0x0>;

	};



	sound {

		compatible = "audio-graph-card";

		label = "STM32MP1-AV96-HDMI";

		dais = <&sai2a_port>;

		status = "okay";

	};



	wlan_pwr: regulator-wlan {

		compatible = "regulator-fixed";



		regulator-name = "wl-reg";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;



		gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>;

		enable-active-high;

	};

};



&adc {

	pinctrl-names = "default";

	pinctrl-0 = <&adc12_ain_pins_b>;

	vdd-supply = <&vdd>;

	vdda-supply = <&vdda>;

	vref-supply = <&vdda>;

	status = "okay";



	adc1: adc@0 {

		st,adc-channels = <0 1 6>;

		st,min-sample-time-nsecs = <5000>;

		status = "okay";

	};



	adc2: adc@100 {

		st,adc-channels = <0 1 2>;

		st,min-sample-time-nsecs = <5000>;

		status = "okay";

	};

};



&ethernet0 {

	status = "okay";

	pinctrl-0 = <&ethernet0_rgmii_pins_c>;

	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_c>;

	pinctrl-names = "default", "sleep";

	phy-mode = "rgmii";

	max-speed = <1000>;

	phy-handle = <&phy0>;



	mdio0 {

		#address-cells = <1>;

		#size-cells = <0>;

		compatible = "snps,dwmac-mdio";

		reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;

		reset-delay-us = <1000>;



		phy0: ethernet-phy@7 {

			reg = <7>;



			rxc-skew-ps = <1500>;

			rxdv-skew-ps = <540>;

			rxd0-skew-ps = <420>;

			rxd1-skew-ps = <420>;

			rxd2-skew-ps = <420>;

			rxd3-skew-ps = <420>;



			txc-skew-ps = <1440>;

			txen-skew-ps = <540>;

			txd0-skew-ps = <420>;

			txd1-skew-ps = <420>;

			txd2-skew-ps = <420>;

			txd3-skew-ps = <420>;

		};

	};

};



&i2c1 {	/* X6 I2C1 */

	pinctrl-names = "default";

	pinctrl-0 = <&i2c1_pins_b>;

	i2c-scl-rising-time-ns = <185>;

	i2c-scl-falling-time-ns = <20>;

	status = "okay";

	/delete-property/dmas;

	/delete-property/dma-names;

};



&i2c2 {	/* X6 I2C2 */

	pinctrl-names = "default";

	pinctrl-0 = <&i2c2_pins_c>;

	i2c-scl-rising-time-ns = <185>;

	i2c-scl-falling-time-ns = <20>;

	status = "okay";

	/delete-property/dmas;

	/delete-property/dma-names;

};



&i2c4 {

	hdmi-transmitter@3d {

		compatible = "adi,adv7513";

		reg = <0x3d>, <0x2d>, <0x4d>, <0x5d>;

		reg-names = "main", "cec", "edid", "packet";

		clocks = <&cec_clock>;

		clock-names = "cec";



		avdd-supply = <&v3v3>;

		dvdd-supply = <&v3v3>;

		pvdd-supply = <&v3v3>;

		dvdd-3v-supply = <&v3v3>;

		bgvdd-supply = <&v3v3>;



		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;

		interrupt-parent = <&gpiog>;



		status = "okay";



		adi,input-depth = <8>;

		adi,input-colorspace = "rgb";

		adi,input-clock = "1x";

		adi,input-style = <1>;

		adi,input-justification = "evenly";



		ports {

			#address-cells = <1>;

			#size-cells = <0>;



			port@0 {

				reg = <0>;

				adv7513_in: endpoint {

					remote-endpoint = <&ltdc_ep0_out>;

				};

			};



			port@1 {

				reg = <1>;

				adv7513_out: endpoint {

					remote-endpoint = <&hdmi_con>;

				};

			};



			port@2 {

				reg = <2>;

				adv7513_i2s0: endpoint {

					remote-endpoint = <&sai2a_endpoint>;

				};

			};

		};

	};

};



&ltdc {

	pinctrl-names = "default", "sleep";

	pinctrl-0 = <&ltdc_pins_d>;

	pinctrl-1 = <&ltdc_sleep_pins_d>;

	status = "okay";



	port {

		#address-cells = <1>;

		#size-cells = <0>;



		ltdc_ep0_out: endpoint@0 {

			reg = <0>;

			remote-endpoint = <&adv7513_in>;

		};

	};

};



&sai2 {

	clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;

	pinctrl-names = "default", "sleep";

	pinctrl-0 = <&sai2a_pins_c>;

	pinctrl-1 = <&sai2a_sleep_pins_c>;

	clock-names = "pclk", "x8k", "x11k";

	status = "okay";



	sai2a: audio-controller@4400b004 {

		#clock-cells = <0>;

		dma-names = "tx";

		clocks = <&rcc SAI2_K>;

		clock-names = "sai_ck";

		status = "okay";



		sai2a_port: port {

			sai2a_endpoint: endpoint {

				remote-endpoint = <&adv7513_i2s0>;

				format = "i2s";

				mclk-fs = <256>;

			};

		};

	};

};



&sdmmc1 {

	pinctrl-names = "default", "opendrain", "sleep";

	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>;

	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>;

	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>;

	cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;

	disable-wp;

	st,sig-dir;

	st,neg-edge;

	st,use-ckin;

	bus-width = <4>;

	vmmc-supply = <&vdd_sd>;

	vqmmc-supply = <&sd_switch>;

	status = "okay";

};



&sdmmc2 {

	pinctrl-names = "default", "opendrain", "sleep";

	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>;

	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_b>;

	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_b>;

	bus-width = <8>;

	mmc-ddr-1_8v;

	no-sd;

	no-sdio;

	non-removable;

	st,neg-edge;

	vmmc-supply = <&v3v3>;

	vqmmc-supply = <&vdd_io>;

	status = "okay";

};



&sdmmc3 {

	pinctrl-names = "default", "opendrain", "sleep";

	pinctrl-0 = <&sdmmc3_b4_pins_b>;

	pinctrl-1 = <&sdmmc3_b4_od_pins_b>;

	pinctrl-2 = <&sdmmc3_b4_sleep_pins_b>;

	broken-cd;

	non-removable;

	st,neg-edge;

	bus-width = <4>;

	vmmc-supply = <&wlan_pwr>;

	status = "okay";



	#address-cells = <1>;

	#size-cells = <0>;

	brcmf: bcrmf@1 {

		reg = <1>;

		compatible = "brcm,bcm4329-fmac";

	};

};



&spi2 {

	pinctrl-names = "default";

	pinctrl-0 = <&spi2_pins_a>;

	cs-gpios = <&gpioi 0 0>;

	status = "disabled";

	/delete-property/dmas;

	/delete-property/dma-names;

};



&uart4 {

	/* On Low speed expansion header */

	label = "LS-UART1";

	pinctrl-names = "default";

	pinctrl-0 = <&uart4_pins_b>;

	status = "okay";

};



&uart7 {

	/* On Low speed expansion header */

	label = "LS-UART0";

	pinctrl-names = "default";

	pinctrl-0 = <&uart7_pins_a>;

	status = "okay";

};



/* Bluetooth */

&usart2 {

	pinctrl-names = "default", "sleep";

	pinctrl-0 = <&usart2_pins_a>;

	pinctrl-1 = <&usart2_sleep_pins_a>;

	st,hw-flow-ctrl;

	status = "okay";



	bluetooth {

		compatible = "brcm,bcm43438-bt";

		max-speed = <3000000>;

		shutdown-gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>;

	};

};



&usbh_ehci {

	phys = <&usbphyc_port0>;

	phy-names = "usb";

	status = "okay";

};



&usbotg_hs {

	pinctrl-0 = <&usbotg_hs_pins_a>;

	pinctrl-names = "default";

	phy-names = "usb2-phy";

	phys = <&usbphyc_port1 0>;

	status = "okay";

	vbus-supply = <&vbus_otg>;

};



&usbphyc {

	status = "okay";

};



&usbphyc_port0 {

	phy-supply = <&vdd_usb>;

	vdda1v1-supply = <&reg11>;

	vdda1v8-supply = <&reg18>;

};



&usbphyc_port1 {

	phy-supply = <&vdd_usb>;

	vdda1v1-supply = <&reg11>;

	vdda1v8-supply = <&reg18>;

};

arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi

0 → 100644
+23 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)

/*

 * Copyright (C) Linaro Ltd 2019 - All Rights Reserved

 * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

 * Copyright (C) 2020 Marek Vasut <marex@denx.de>

 */



/ {

	/* Enpirion EP3A8LQI U2 on the DHCOR */

	vdd_io: regulator-buck-io {

		compatible = "regulator-fixed";

		regulator-name = "buck-io";

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <1800000>;

		regulator-always-on;

		regulator-boot-on;

		vin-supply = <&vdd>;

	};

};



&pwr_regulators {

	vdd-supply = <&vdd_io>;

};