Commit 7b70c427 authored by Russell King's avatar Russell King
Browse files

Merge branch 'devel-stable' into devel 

Conflicts:
	arch/arm/kernel/entry-armv.S
	arch/arm/kernel/setup.c
	arch/arm/mm/init.c
parents ceb0885d a20df564

arch/arm/Kconfig

+135 −1
Original line number Diff line number Diff line
@@ -303,6 +303,7 @@ config ARCH_CNS3XXX 
	select CPU_V6

	select GENERIC_CLOCKEVENTS

	select ARM_GIC

	select PCI_DOMAINS if PCI

	help

	  Support for Cavium Networks CNS3XXX platform.
@@ -469,6 +470,19 @@ config ARCH_LOKI 
	help

	  Support for the Marvell Loki (88RC8480) SoC.



config ARCH_LPC32XX

	bool "NXP LPC32XX"

	select CPU_ARM926T

	select ARCH_REQUIRE_GPIOLIB

	select HAVE_IDE

	select ARM_AMBA

	select USB_ARCH_HAS_OHCI

	select COMMON_CLKDEV

	select GENERIC_TIME

	select GENERIC_CLOCKEVENTS

	help

	  Support for the NXP LPC32XX family of processors



config ARCH_MV78XX0

	bool "Marvell MV78xx0"

	select CPU_FEROCEON
@@ -573,6 +587,7 @@ config ARCH_MSM 
	bool "Qualcomm MSM"

	select HAVE_CLK

	select GENERIC_CLOCKEVENTS

	select ARCH_REQUIRE_GPIOLIB

	help

	  Support for Qualcomm MSM/QSD based systems.  This runs on the

	  apps processor of the MSM/QSD and depends on a shared memory
@@ -831,6 +846,8 @@ source "arch/arm/mach-lh7a40x/Kconfig" 


source "arch/arm/mach-loki/Kconfig"



source "arch/arm/mach-lpc32xx/Kconfig"



source "arch/arm/mach-msm/Kconfig"



source "arch/arm/mach-mv78xx0/Kconfig"
@@ -1041,7 +1058,7 @@ config ISA_DMA_API 
	bool



config PCI

	bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE

	bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE || ARCH_CNS3XXX

	help

	  Find out whether you have a PCI motherboard. PCI is the name of a

	  bus system, i.e. the way the CPU talks to the other stuff inside
@@ -1372,6 +1389,24 @@ config UACCESS_WITH_MEMCPY 
	  However, if the CPU data cache is using a write-allocate mode,

	  this option is unlikely to provide any performance gain.



config CC_STACKPROTECTOR

	bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"

	help

	  This option turns on the -fstack-protector GCC feature. This

	  feature puts, at the beginning of functions, a canary value on

	  the stack just before the return address, and validates

	  the value just before actually returning.  Stack based buffer

	  overflows (that need to overwrite this return address) now also

	  overwrite the canary, which gets detected and the attack is then

	  neutralized via a kernel panic.

	  This feature requires gcc version 4.2 or above.



config DEPRECATED_PARAM_STRUCT

	bool "Provide old way to pass kernel parameters"

	help

	  This was deprecated in 2001 and announced to live on for 5 years.

	  Some old boot loaders still use this way.



endmenu



menu "Boot options"
@@ -1482,6 +1517,105 @@ config ATAGS_PROC 
	  Should the atags used to boot the kernel be exported in an "atags"

	  file in procfs. Useful with kexec.



config AUTO_ZRELADDR

	bool "Auto calculation of the decompressed kernel image address"

	depends on !ZBOOT_ROM && !ARCH_U300

	help

	  ZRELADDR is the physical address where the decompressed kernel

	  image will be placed. If AUTO_ZRELADDR is selected, the address

	  will be determined at run-time by masking the current IP with

	  0xf8000000. This assumes the zImage being placed in the first 128MB

	  from start of memory.



config ZRELADDR

	hex "Physical address of the decompressed kernel image"

	depends on !AUTO_ZRELADDR

	default 0x00008000 if ARCH_BCMRING ||\

		ARCH_CNS3XXX ||\

		ARCH_DOVE ||\

		ARCH_EBSA110 ||\

		ARCH_FOOTBRIDGE ||\

		ARCH_INTEGRATOR ||\

		ARCH_IOP13XX ||\

		ARCH_IOP33X ||\

		ARCH_IXP2000 ||\

		ARCH_IXP23XX ||\

		ARCH_IXP4XX ||\

		ARCH_KIRKWOOD ||\

		ARCH_KS8695 ||\

		ARCH_LOKI ||\

		ARCH_MMP ||\

		ARCH_MV78XX0 ||\

		ARCH_NOMADIK ||\

		ARCH_NUC93X ||\

		ARCH_NS9XXX ||\

		ARCH_ORION5X ||\

		ARCH_SPEAR3XX ||\

		ARCH_SPEAR6XX ||\

		ARCH_U8500 ||\

		ARCH_VERSATILE ||\

		ARCH_W90X900

	default 0x08008000 if ARCH_MX1 ||\

		ARCH_SHARK

	default 0x10008000 if ARCH_MSM ||\

		ARCH_OMAP1 ||\

		ARCH_RPC

	default 0x20008000 if ARCH_S5P6440 ||\

		ARCH_S5P6442 ||\

		ARCH_S5PC100 ||\

		ARCH_S5PV210

	default 0x30008000 if ARCH_S3C2410 ||\

		ARCH_S3C2400 ||\

		ARCH_S3C2412 ||\

		ARCH_S3C2416 ||\

		ARCH_S3C2440 ||\

		ARCH_S3C2443

	default 0x40008000 if ARCH_STMP378X ||\

		ARCH_STMP37XX ||\

		ARCH_SH7372 ||\

		ARCH_SH7377

	default 0x50008000 if ARCH_S3C64XX ||\

		ARCH_SH7367

	default 0x60008000 if ARCH_VEXPRESS

	default 0x80008000 if ARCH_MX25 ||\

		ARCH_MX3 ||\

		ARCH_NETX ||\

		ARCH_OMAP2PLUS ||\

		ARCH_PNX4008

	default 0x90008000 if ARCH_MX5 ||\

		ARCH_MX91231

	default 0xa0008000 if ARCH_IOP32X ||\

		ARCH_PXA ||\

		MACH_MX27

	default 0xc0008000 if ARCH_LH7A40X ||\

		MACH_MX21

	default 0xf0008000 if ARCH_AAEC2000 ||\

		ARCH_L7200

	default 0xc0028000 if ARCH_CLPS711X

	default 0x70008000 if ARCH_AT91 && (ARCH_AT91CAP9 || ARCH_AT91SAM9G45)

	default 0x20008000 if ARCH_AT91 && !(ARCH_AT91CAP9 || ARCH_AT91SAM9G45)

	default 0xc0008000 if ARCH_DAVINCI && ARCH_DAVINCI_DA8XX

	default 0x80008000 if ARCH_DAVINCI && !ARCH_DAVINCI_DA8XX

	default 0x00008000 if ARCH_EP93XX && EP93XX_SDCE3_SYNC_PHYS_OFFSET

	default 0xc0008000 if ARCH_EP93XX && EP93XX_SDCE0_PHYS_OFFSET

	default 0xd0008000 if ARCH_EP93XX && EP93XX_SDCE1_PHYS_OFFSET

	default 0xe0008000 if ARCH_EP93XX && EP93XX_SDCE2_PHYS_OFFSET

	default 0xf0008000 if ARCH_EP93XX && EP93XX_SDCE3_ASYNC_PHYS_OFFSET

	default 0x00008000 if ARCH_GEMINI && GEMINI_MEM_SWAP

	default 0x10008000 if ARCH_GEMINI && !GEMINI_MEM_SWAP

	default 0x70008000 if ARCH_REALVIEW && REALVIEW_HIGH_PHYS_OFFSET

	default 0x00008000 if ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET

	default 0xc0208000 if ARCH_SA1100 && SA1111

	default 0xc0008000 if ARCH_SA1100 && !SA1111

	default 0x30108000 if ARCH_S3C2410 && PM_H1940

	default 0x28E08000 if ARCH_U300 && MACH_U300_SINGLE_RAM

	default 0x48008000 if ARCH_U300 && !MACH_U300_SINGLE_RAM

	help

	  ZRELADDR is the physical address where the decompressed kernel

	  image will be placed. ZRELADDR has to be specified when the

	  assumption of AUTO_ZRELADDR is not valid, or when ZBOOT_ROM is

	  selected.



endmenu



menu "CPU Power Management"

arch/arm/Makefile

+7 −2
Original line number Diff line number Diff line
@@ -34,6 +34,10 @@ ifeq ($(CONFIG_FRAME_POINTER),y) 
KBUILD_CFLAGS	+=-fno-omit-frame-pointer -mapcs -mno-sched-prolog

endif



ifeq ($(CONFIG_CC_STACKPROTECTOR),y)

KBUILD_CFLAGS	+=-fstack-protector

endif



ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)

KBUILD_CPPFLAGS	+= -mbig-endian

AS		+= -EB
@@ -141,11 +145,12 @@ machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood 
machine-$(CONFIG_ARCH_KS8695)		:= ks8695

machine-$(CONFIG_ARCH_LH7A40X)		:= lh7a40x

machine-$(CONFIG_ARCH_LOKI) 		:= loki

machine-$(CONFIG_ARCH_LPC32XX)		:= lpc32xx

machine-$(CONFIG_ARCH_MMP)		:= mmp

machine-$(CONFIG_ARCH_MSM)		:= msm

machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0

machine-$(CONFIG_ARCH_MX1)		:= mx1

machine-$(CONFIG_ARCH_MX2)		:= mx2

machine-$(CONFIG_ARCH_MX1)		:= imx

machine-$(CONFIG_ARCH_MX2)		:= imx

machine-$(CONFIG_ARCH_MX25)		:= mx25

machine-$(CONFIG_ARCH_MX3)		:= mx3

machine-$(CONFIG_ARCH_MX5)		:= mx5

arch/arm/boot/Makefile

+3 −5
Original line number Diff line number Diff line
@@ -14,18 +14,16 @@ 
MKIMAGE         := $(srctree)/scripts/mkuboot.sh



ifneq ($(MACHINE),)

include $(srctree)/$(MACHINE)/Makefile.boot

-include $(srctree)/$(MACHINE)/Makefile.boot

endif



# Note: the following conditions must always be true:

#   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)

#   PARAMS_PHYS must be within 4MB of ZRELADDR

#   INITRD_PHYS must be in RAM

ZRELADDR    := $(zreladdr-y)

PARAMS_PHYS := $(params_phys-y)

INITRD_PHYS := $(initrd_phys-y)



export ZRELADDR INITRD_PHYS PARAMS_PHYS

export INITRD_PHYS PARAMS_PHYS



targets := Image zImage xipImage bootpImage uImage
@@ -67,7 +65,7 @@ quiet_cmd_uimage = UIMAGE $@ 
ifeq ($(CONFIG_ZBOOT_ROM),y)

$(obj)/uImage: LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT)

else

$(obj)/uImage: LOADADDR=$(ZRELADDR)

$(obj)/uImage: LOADADDR=$(CONFIG_ZRELADDR)

endif



ifeq ($(CONFIG_THUMB2_KERNEL),y)

arch/arm/boot/compressed/Makefile

+1 −10
Original line number Diff line number Diff line
@@ -4,6 +4,7 @@ 
# create a compressed vmlinuz image from the original vmlinux

#



AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET)

HEAD	= head.o

OBJS	= misc.o decompress.o

FONTC	= $(srctree)/drivers/video/console/font_acorn_8x8.c
@@ -75,19 +76,9 @@ endif 
EXTRA_CFLAGS  := -fpic -fno-builtin

EXTRA_AFLAGS  := -Wa,-march=all



# Supply ZRELADDR, INITRD_PHYS and PARAMS_PHYS to the decompressor via

# linker symbols.  We only define initrd_phys and params_phys if the

# machine class defined the corresponding makefile variable.

LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)

ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)

LDFLAGS_vmlinux += --be8

endif

ifneq ($(INITRD_PHYS),)

LDFLAGS_vmlinux += --defsym initrd_phys=$(INITRD_PHYS)

endif

ifneq ($(PARAMS_PHYS),)

LDFLAGS_vmlinux += --defsym params_phys=$(PARAMS_PHYS)

endif

# ?

LDFLAGS_vmlinux += -p

# Report unresolved symbol references

arch/arm/boot/compressed/Makefile.debug

deleted100644 → 0
+0 −23
Original line number Diff line number Diff line 
#

# linux/arch/arm/boot/compressed/Makefile

#

# create a compressed vmlinux image from the original vmlinux

#



COMPRESSED_EXTRA=../../lib/ll_char_wr.o

OBJECTS=misc-debug.o ll_char_wr.aout.o



CFLAGS=-D__KERNEL__ -O2 -DSTDC_HEADERS -DSTANDALONE_DEBUG -Wall -I../../../../include -c



test-gzip: piggy.aout.o $(OBJECTS)

	$(CC) -o $@ $(OBJECTS) piggy.aout.o



misc-debug.o: misc.c

	$(CC) $(CFLAGS) -o $@ misc.c



piggy.aout.o: piggy.o

	arm-linuxelf-objcopy --change-leading-char -I elf32-arm -O arm-aout32-linux piggy.o piggy.aout.o



ll_char_wr.aout.o: $(COMPRESSED_EXTRA)

	arm-linuxelf-objcopy --change-leading-char -I elf32-arm -O arm-aout32-linux $(COMPRESSED_EXTRA) ll_char_wr.aout.o