Commit 73c105ad authored by Sergey Shtylyov's avatar Sergey Shtylyov Committed by David S. Miller
Browse files

phy: make phy_set_max_speed() *void*



After following the call tree of phy_set_max_speed(), it became clear
that this function never returns anything but 0, so we can change its
result type to *void* and drop the result checks from the three drivers
that actually bothered to do it...

Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.

Signed-off-by: default avatarSergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent fe893027
Loading
Loading
Loading
Loading
+1 −7
Original line number Diff line number Diff line
@@ -1432,11 +1432,7 @@ static int ravb_phy_init(struct net_device *ndev)
	 * at this time.
	 */
	if (soc_device_match(r8a7795es10)) {
		err = phy_set_max_speed(phydev, SPEED_100);
		if (err) {
			netdev_err(ndev, "failed to limit PHY to 100Mbit/s\n");
			goto err_phy_disconnect;
		}
		phy_set_max_speed(phydev, SPEED_100);

		netdev_info(ndev, "limited PHY to 100Mbit/s\n");
	}
@@ -1457,8 +1453,6 @@ static int ravb_phy_init(struct net_device *ndev)

	return 0;

err_phy_disconnect:
	phy_disconnect(phydev);
err_deregister_fixed_link:
	if (of_phy_is_fixed_link(np))
		of_phy_deregister_fixed_link(np);
+2 −8
Original line number Diff line number Diff line
@@ -2026,14 +2026,8 @@ static int sh_eth_phy_init(struct net_device *ndev)
	}

	/* mask with MAC supported features */
	if (mdp->cd->register_type != SH_ETH_REG_GIGABIT) {
		int err = phy_set_max_speed(phydev, SPEED_100);
		if (err) {
			netdev_err(ndev, "failed to limit PHY to 100 Mbit/s\n");
			phy_disconnect(phydev);
			return err;
		}
	}
	if (mdp->cd->register_type != SH_ETH_REG_GIGABIT)
		phy_set_max_speed(phydev, SPEED_100);

	phy_attached_info(phydev);

+1 −3
Original line number Diff line number Diff line
@@ -533,9 +533,7 @@ static int aqcs109_config_init(struct phy_device *phydev)
	 * PMA speed ability bits are the same for all members of the family,
	 * AQCS109 however supports speeds up to 2.5G only.
	 */
	ret = phy_set_max_speed(phydev, SPEED_2500);
	if (ret)
		return ret;
	phy_set_max_speed(phydev, SPEED_2500);

	return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
}
+8 −14
Original line number Diff line number Diff line
@@ -243,7 +243,7 @@ size_t phy_speeds(unsigned int *speeds, size_t size,
	return count;
}

static int __set_linkmode_max_speed(u32 max_speed, unsigned long *addr)
static void __set_linkmode_max_speed(u32 max_speed, unsigned long *addr)
{
	const struct phy_setting *p;
	int i;
@@ -254,13 +254,11 @@ static int __set_linkmode_max_speed(u32 max_speed, unsigned long *addr)
		else
			break;
	}

	return 0;
}

static int __set_phy_supported(struct phy_device *phydev, u32 max_speed)
static void __set_phy_supported(struct phy_device *phydev, u32 max_speed)
{
	return __set_linkmode_max_speed(max_speed, phydev->supported);
	__set_linkmode_max_speed(max_speed, phydev->supported);
}

/**
@@ -273,17 +271,11 @@ static int __set_phy_supported(struct phy_device *phydev, u32 max_speed)
 * is connected to a 1G PHY. This function allows the MAC to indicate its
 * maximum speed, and so limit what the PHY will advertise.
 */
int phy_set_max_speed(struct phy_device *phydev, u32 max_speed)
void phy_set_max_speed(struct phy_device *phydev, u32 max_speed)
{
	int err;

	err = __set_phy_supported(phydev, max_speed);
	if (err)
		return err;
	__set_phy_supported(phydev, max_speed);

	phy_advertise_supported(phydev);

	return 0;
}
EXPORT_SYMBOL(phy_set_max_speed);

@@ -440,7 +432,9 @@ int phy_speed_down_core(struct phy_device *phydev)
	if (min_common_speed == SPEED_UNKNOWN)
		return -EINVAL;

	return __set_linkmode_max_speed(min_common_speed, phydev->advertising);
	__set_linkmode_max_speed(min_common_speed, phydev->advertising);

	return 0;
}

static void mmd_phy_indirect(struct mii_bus *bus, int phy_addr, int devad,
+1 −1
Original line number Diff line number Diff line
@@ -1661,7 +1661,7 @@ int phy_disable_interrupts(struct phy_device *phydev);
void phy_request_interrupt(struct phy_device *phydev);
void phy_free_interrupt(struct phy_device *phydev);
void phy_print_status(struct phy_device *phydev);
int phy_set_max_speed(struct phy_device *phydev, u32 max_speed);
void phy_set_max_speed(struct phy_device *phydev, u32 max_speed);
void phy_remove_link_mode(struct phy_device *phydev, u32 link_mode);
void phy_advertise_supported(struct phy_device *phydev);
void phy_support_sym_pause(struct phy_device *phydev);