Commit 73907f98 authored by Linus Walleij's avatar Linus Walleij
Browse files

ARM: ixp4xx: Delete Gateway WG302v2 boardfiles 



This board is replaced with the corresponding device tree.

Cc: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 86687cc4

arch/arm/mach-ixp4xx/Kconfig

+0 −8
Original line number Diff line number Diff line
@@ -49,14 +49,6 @@ config MACH_GATEWAY7001 
	  7001 Access Point. For more information on this platform,

	  see http://openwrt.org



config MACH_WG302V2

	bool "Netgear WG302 v2 / WAG302 v2"

	depends on IXP4XX_PCI_LEGACY

	help

	  Say 'Y' here if you want your kernel to support Netgear's

	  WG302 v2 or WAG302 v2 Access Points. For more information

	  on this platform, see http://openwrt.org



config ARCH_IXDP425

	bool "IXDP425"

	depends on IXP4XX_PCI_LEGACY

arch/arm/mach-ixp4xx/Makefile

+0 −2
Original line number Diff line number Diff line
@@ -15,7 +15,6 @@ obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o 
obj-pci-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o

obj-pci-$(CONFIG_MACH_GTWX5715)		+= gtwx5715-pci.o

obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o

obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o

obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o

obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-pci.o
@@ -27,7 +26,6 @@ obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o 
obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-setup.o

obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-setup.o

obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o

obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o

obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o

obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o

obj-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-setup.o

arch/arm/mach-ixp4xx/wg302v2-pci.c

deleted100644 → 0
+0 −60
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0-only

/*

 * arch/arch/mach-ixp4xx/wg302v2-pci.c

 *

 * PCI setup routines for the Netgear WG302 v2 and WAG302 v2

 *

 * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>

 *

 * based on coyote-pci.c:

 *	Copyright (C) 2002 Jungo Software Technologies.

 *	Copyright (C) 2003 MontaVista Software, Inc.

 *

 * Maintainer: Imre Kaloz <kaloz@openwrt.org>

 */



#include <linux/kernel.h>

#include <linux/pci.h>

#include <linux/init.h>

#include <linux/irq.h>



#include <asm/mach-types.h>

#include <mach/hardware.h>



#include <asm/mach/pci.h>



#include "irqs.h"



void __init wg302v2_pci_preinit(void)

{

	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);

	irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);



	ixp4xx_pci_preinit();

}



static int __init wg302v2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)

{

	if (slot == 1)

		return IRQ_IXP4XX_GPIO8;

	else if (slot == 2)

		return IRQ_IXP4XX_GPIO9;

	else return -1;

}



struct hw_pci wg302v2_pci __initdata = {

	.nr_controllers = 1,

	.ops = &ixp4xx_ops,

	.preinit =        wg302v2_pci_preinit,

	.setup =          ixp4xx_setup,

	.map_irq =        wg302v2_map_irq,

};



int __init wg302v2_pci_init(void)

{

	if (machine_is_wg302v2())

		pci_common_init(&wg302v2_pci);

	return 0;

}



subsys_initcall(wg302v2_pci_init);

arch/arm/mach-ixp4xx/wg302v2-setup.c

deleted100644 → 0
+0 −114
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0

/*

 * arch/arm/mach-ixp4xx/wg302-setup.c

 *

 * Board setup for the Netgear WG302 v2 and WAG302 v2

 *

 * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>

 *

 * based on coyote-setup.c:

 *      Copyright (C) 2003-2005 MontaVista Software, Inc.

 *

 * Author: Imre Kaloz <kaloz@openwrt.org>

 *

 */



#include <linux/kernel.h>

#include <linux/init.h>

#include <linux/device.h>

#include <linux/serial.h>

#include <linux/tty.h>

#include <linux/serial_8250.h>



#include <asm/types.h>

#include <asm/setup.h>

#include <asm/memory.h>

#include <mach/hardware.h>

#include <asm/irq.h>

#include <asm/mach-types.h>

#include <asm/mach/arch.h>

#include <asm/mach/flash.h>



#include "irqs.h"



static struct flash_platform_data wg302v2_flash_data = {

	.map_name	= "cfi_probe",

	.width		= 2,

};



static struct resource wg302v2_flash_resource = {

	.flags		= IORESOURCE_MEM,

};



static struct platform_device wg302v2_flash = {

	.name		= "IXP4XX-Flash",

	.id		= 0,

	.dev		= {

		.platform_data = &wg302v2_flash_data,

	},

	.num_resources	= 1,

	.resource	= &wg302v2_flash_resource,

};



static struct resource wg302v2_uart_resource = {

	.start	= IXP4XX_UART2_BASE_PHYS,

	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,

	.flags	= IORESOURCE_MEM,

};



static struct plat_serial8250_port wg302v2_uart_data[] = {

	{

		.mapbase	= IXP4XX_UART2_BASE_PHYS,

		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,

		.irq		= IRQ_IXP4XX_UART2,

		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,

		.iotype		= UPIO_MEM,

		.regshift	= 2,

		.uartclk	= IXP4XX_UART_XTAL,

	},

	{ },

};



static struct platform_device wg302v2_uart = {

	.name		= "serial8250",

	.id		= PLAT8250_DEV_PLATFORM,

	.dev			= {

		.platform_data	= wg302v2_uart_data,

	},

	.num_resources	= 1,

	.resource	= &wg302v2_uart_resource,

};



static struct platform_device *wg302v2_devices[] __initdata = {

	&wg302v2_flash,

	&wg302v2_uart,

};



static void __init wg302v2_init(void)

{

	ixp4xx_sys_init();



	wg302v2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);

	wg302v2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;



	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;

	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;



	platform_add_devices(wg302v2_devices, ARRAY_SIZE(wg302v2_devices));

}



#ifdef CONFIG_MACH_WG302V2

MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")

	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */

	.map_io		= ixp4xx_map_io,

	.init_early	= ixp4xx_init_early,

	.init_irq	= ixp4xx_init_irq,

	.init_time	= ixp4xx_timer_init,

	.atag_offset	= 0x100,

	.init_machine	= wg302v2_init,

#if defined(CONFIG_PCI)

	.dma_zone_size	= SZ_64M,

#endif

	.restart	= ixp4xx_restart,

MACHINE_END

#endif