Commit 6f79fcc6 authored by Matthias Kaehlcke's avatar Matthias Kaehlcke Committed by Heiko Stuebner
Browse files

ARM: dts: rockchip: Add pin names for rk3288-veyron fievel 



This is like commit 0ca87bd5 ("ARM: dts: rockchip: Add pin names
for rk3288-veyron-jerry") and other similar commits, but for the
veyron fievel board (and tiger, which includes the fievel .dtsi).

Signed-off-by: default avatarMatthias Kaehlcke <mka@chromium.org>
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent 94562040

arch/arm/boot/dts/rk3288-veyron-fievel.dts

+214 −0
Original line number Diff line number Diff line
@@ -204,6 +204,220 @@ 
	pinctrl-0 = <&drv_5v>;

};



&gpio0 {

	gpio-line-names = "PMIC_SLEEP_AP",

			  "DDRIO_PWROFF",

			  "DDRIO_RETEN",

			  "TS3A227E_INT_L",

			  "PMIC_INT_L",

			  "PWR_KEY_L",

			  "HUB_USB1_nFALUT",

			  "PHY_PMEB",



			  "PHY_INT",

			  "REC_MODE_L",

			  "OTP_OUT",

			  "",

			  "USB_OTG_POWER_EN",

			  "AP_WARM_RESET_H",

			  "USB_OTG_nFALUT",

			  "I2C0_SDA_PMIC",



			  "I2C0_SCL_PMIC",

			  "DEVMODE_L",

			  "USB_INT";

};



&gpio2 {

	gpio-line-names = "CONFIG0",

			  "CONFIG1",

			  "CONFIG2",

			  "",

			  "",

			  "",

			  "",

			  "CONFIG3",



			  "",

			  "EMMC_RST_L",

			  "",

			  "",

			  "BL_PWR_EN",

			  "",

			  "TOUCH_INT",

			  "TOUCH_RST",



			  "I2C3_SCL_TP",

			  "I2C3_SDA_TP";

};



&gpio3 {

	gpio-line-names = "FLASH0_D0",

			  "FLASH0_D1",

			  "FLASH0_D2",

			  "FLASH0_D3",

			  "FLASH0_D4",

			  "FLASH0_D5",

			  "FLASH0_D6",

			  "FLASH0_D7",



			  "VCC5V_GOOD_H",

			  "",

			  "",

			  "",

			  "",

			  "",

			  "",

			  "",



			  "FLASH0_CS2/EMMC_CMD",

			  "",

			  "FLASH0_DQS/EMMC_CLKO",

			  "",

			  "",

			  "",

			  "",

			  "",



			  "PHY_TXD2",

			  "PHY_TXD3",

			  "MAC_RXD2",

			  "MAC_RXD3",

			  "PHY_TXD0",

			  "PHY_TXD1",

			  "MAC_RXD0",

			  "MAC_RXD1";

};



&gpio4 {

	gpio-line-names = "MAC_MDC",

			  "MAC_RXDV",

			  "MAC_RXER",

			  "MAC_CLK",

			  "PHY_TXEN",

			  "MAC_MDIO",

			  "MAC_RXCLK",

			  "",



			  "PHY_RST",

			  "PHY_TXCLK",

			  "",

			  "",

			  "",

			  "",

			  "",

			  "",



			  "UART0_RXD",

			  "UART0_TXD",

			  "UART0_CTS_L",

			  "UART0_RTS_L",

			  "SDIO0_D0",

			  "SDIO0_D1",

			  "SDIO0_D2",

			  "SDIO0_D3",



			  "SDIO0_CMD",

			  "SDIO0_CLK",

			  "BT_DEV_WAKE",

			  "",

			  "WIFI_ENABLE_H",

			  "BT_ENABLE_L",

			  "WIFI_HOST_WAKE",

			  "BT_HOST_WAKE";

};



&gpio5 {

	gpio-line-names = "",

			  "",

			  "",

			  "",

			  "",

			  "",

			  "",

			  "",



			  "",

			  "",

			  "",

			  "",

			  "USB_OTG_CTL1",

			  "HUB_USB2_CTL1",

			  "HUB_USB2_PWR_EN",

			  "HUB_USB_ILIM_SEL",



			  "USB_OTG_STATUS_L",

			  "HUB_USB1_CTL1",

			  "HUB_USB1_PWR_EN",

			  "VCC50_HDMI_EN";

};



&gpio6 {

	gpio-line-names = "I2S0_SCLK",

			  "I2S0_LRCK_RX",

			  "I2S0_LRCK_TX",

			  "I2S0_SDI",

			  "I2S0_SDO0",

			  "HP_DET_H",

			  "",

			  "INT_CODEC",



			  "I2S0_CLK",

			  "I2C2_SDA",

			  "I2C2_SCL",

			  "MICDET",

			  "",

			  "",

			  "",

			  "",



			  "HUB_USB2_nFALUT",

			  "USB_OTG_ILIM_SEL";

};



&gpio7 {

	gpio-line-names = "LCD_BL_PWM",

			  "PWM_LOG",

			  "BL_EN",

			  "PWR_LED1",

			  "TPM_INT_H",

			  "SPK_ON",

			  "FW_WP_AP",

			  "",



			  "CPU_NMI",

			  "DVSOK",

			  "",

			  "EDP_HPD",

			  "DVS1",

			  "",

			  "LCD_EN",

			  "DVS2",



			  "HDMI_CEC",

			  "I2C4_SDA",

			  "I2C4_SCL",

			  "I2C5_SDA_HDMI",

			  "I2C5_SCL_HDMI",

			  "5V_DRV",

			  "UART2_RXD",

			  "UART2_TXD";

};



&gpio8 {

	gpio-line-names = "RAM_ID0",

			  "RAM_ID1",

			  "RAM_ID2",

			  "RAM_ID3",

			  "I2C1_SDA_TPM",

			  "I2C1_SCL_TPM",

			  "SPI2_CLK",

			  "SPI2_CS0",



			  "SPI2_RXD",

			  "SPI2_TXD";

};



&pinctrl {

	pinctrl-names = "default", "sleep";

	pinctrl-0 = <