Unverified Commit 6c557d24 authored by Mark Brown's avatar Mark Brown
Browse files

Merge series "opp: Unconditionally call dev_pm_opp_of_remove_table()" from... 

Merge series "opp: Unconditionally call dev_pm_opp_of_remove_table()" from Viresh Kumar <viresh.kumar@linaro.org>:

Hello,

This cleans up some of the user code around calls to
dev_pm_opp_of_remove_table().

All the patches can be picked by respective maintainers directly except
for the last patch, which needs the previous two to get merged first.

These are based for 5.9-rc1.

Rajendra, Since most of these changes are related to qcom stuff, it
would be great if you can give them a try. I wasn't able to test them
due to lack of hardware.

Ulf, I had to revise the sdhci patch, sorry about that. Please pick this
one.

Diff between V1 and V2 is mentioned in each of the patches separately.

Viresh Kumar (8):
  cpufreq: imx6q: Unconditionally call dev_pm_opp_of_remove_table()
  drm/lima: Unconditionally call dev_pm_opp_of_remove_table()
  drm/msm: Unconditionally call dev_pm_opp_of_remove_table()
  mmc: sdhci-msm: Unconditionally call dev_pm_opp_of_remove_table()
  spi: spi-geni-qcom: Unconditionally call dev_pm_opp_of_remove_table()
  spi: spi-qcom-qspi: Unconditionally call dev_pm_opp_of_remove_table()
  tty: serial: qcom_geni_serial: Unconditionally call
    dev_pm_opp_of_remove_table()
  qcom-geni-se: remove has_opp_table

 drivers/cpufreq/imx6q-cpufreq.c         | 10 ++--------
 drivers/gpu/drm/lima/lima_devfreq.c     |  6 +-----
 drivers/gpu/drm/lima/lima_devfreq.h     |  1 -
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 14 +++++---------
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h |  1 -
 drivers/gpu/drm/msm/dsi/dsi_host.c      |  8 ++------
 drivers/mmc/host/sdhci-msm.c            | 14 +++++---------
 drivers/spi/spi-geni-qcom.c             | 13 +++++--------
 drivers/spi/spi-qcom-qspi.c             | 15 ++++++---------
 drivers/tty/serial/qcom_geni_serial.c   | 13 +++++--------
 include/linux/qcom-geni-se.h            |  2 --
 11 files changed, 31 insertions(+), 66 deletions(-)

base-commit: f4d51dff
--
2.25.0.rc1.19.g042ed3e048af
parents 4ebf8816 062cf7fc

.clang-format

+12 −0
Original line number Diff line number Diff line
@@ -111,6 +111,7 @@ ForEachMacros: 
  - 'css_for_each_descendant_pre'

  - 'device_for_each_child_node'

  - 'dma_fence_chain_for_each'

  - 'do_for_each_ftrace_op'

  - 'drm_atomic_crtc_for_each_plane'

  - 'drm_atomic_crtc_state_for_each_plane'

  - 'drm_atomic_crtc_state_for_each_plane_state'
@@ -136,6 +137,7 @@ ForEachMacros: 
  - 'for_each_active_dev_scope'

  - 'for_each_active_drhd_unit'

  - 'for_each_active_iommu'

  - 'for_each_aggr_pgid'

  - 'for_each_available_child_of_node'

  - 'for_each_bio'

  - 'for_each_board_func_rsrc'
@@ -234,6 +236,7 @@ ForEachMacros: 
  - 'for_each_node_state'

  - 'for_each_node_with_cpus'

  - 'for_each_node_with_property'

  - 'for_each_nonreserved_multicast_dest_pgid'

  - 'for_each_of_allnodes'

  - 'for_each_of_allnodes_from'

  - 'for_each_of_cpu_node'
@@ -256,6 +259,7 @@ ForEachMacros: 
  - 'for_each_pci_dev'

  - 'for_each_pci_msi_entry'

  - 'for_each_pcm_streams'

  - 'for_each_physmem_range'

  - 'for_each_populated_zone'

  - 'for_each_possible_cpu'

  - 'for_each_present_cpu'
@@ -265,6 +269,8 @@ ForEachMacros: 
  - 'for_each_process_thread'

  - 'for_each_property_of_node'

  - 'for_each_registered_fb'

  - 'for_each_requested_gpio'

  - 'for_each_requested_gpio_in_range'

  - 'for_each_reserved_mem_region'

  - 'for_each_rtd_codec_dais'

  - 'for_each_rtd_codec_dais_rollback'
@@ -278,12 +284,17 @@ ForEachMacros: 
  - 'for_each_sg'

  - 'for_each_sg_dma_page'

  - 'for_each_sg_page'

  - 'for_each_sgtable_dma_page'

  - 'for_each_sgtable_dma_sg'

  - 'for_each_sgtable_page'

  - 'for_each_sgtable_sg'

  - 'for_each_sibling_event'

  - 'for_each_subelement'

  - 'for_each_subelement_extid'

  - 'for_each_subelement_id'

  - '__for_each_thread'

  - 'for_each_thread'

  - 'for_each_unicast_dest_pgid'

  - 'for_each_wakeup_source'

  - 'for_each_zone'

  - 'for_each_zone_zonelist'
@@ -464,6 +475,7 @@ ForEachMacros: 
  - 'v4l2_m2m_for_each_src_buf'

  - 'v4l2_m2m_for_each_src_buf_safe'

  - 'virtio_device_for_each_vq'

  - 'while_for_each_ftrace_op'

  - 'xa_for_each'

  - 'xa_for_each_marked'

  - 'xa_for_each_range'

Documentation/RCU/lockdep.rst

+1 −1
Original line number Diff line number Diff line
@@ -49,7 +49,7 @@ checking of rcu_dereference() primitives: 
		is invoked by both RCU-sched readers and updaters.

	srcu_dereference_check(p, c):

		Use explicit check expression "c" along with

		srcu_read_lock_held()().  This is useful in code that

		srcu_read_lock_held().  This is useful in code that

		is invoked by both SRCU readers and updaters.

	rcu_dereference_raw(p):

		Don't check.  (Use sparingly, if at all.)

Documentation/admin-guide/devices.txt

+1 −1
Original line number Diff line number Diff line
@@ -1662,7 +1662,7 @@ 


  98 block	User-mode virtual block device

		  0 = /dev/ubda		First user-mode block device

		 16 = /dev/udbb		Second user-mode block device

		 16 = /dev/ubdb		Second user-mode block device

		    ...



		Partitions are handled in the same way as for IDE

Documentation/admin-guide/laptops/thinkpad-acpi.rst

+1 −1
Original line number Diff line number Diff line
@@ -1434,7 +1434,7 @@ on the feature, restricting the viewing angles. 




DYTC Lapmode sensor

------------------

-------------------



sysfs: dytc_lapmode

Documentation/admin-guide/pm/intel_pstate.rst

+5 −3
Original line number Diff line number Diff line
@@ -123,7 +123,9 @@ Energy-Performance Bias (EPB) knob (otherwise), which means that the processor's 
internal P-state selection logic is expected to focus entirely on performance.



This will override the EPP/EPB setting coming from the ``sysfs`` interface

(see `Energy vs Performance Hints`_ below).

(see `Energy vs Performance Hints`_ below).  Moreover, any attempts to change

the EPP/EPB to a value different from 0 ("performance") via ``sysfs`` in this

configuration will be rejected.



Also, in this configuration the range of P-states available to the processor's

internal P-state selection logic is always restricted to the upper boundary
@@ -564,7 +566,7 @@ Energy-Performance Preference (EPP) knob (if supported) or its 
Energy-Performance Bias (EPB) knob. It is also possible to write a positive

integer value between 0 to 255, if the EPP feature is present. If the EPP

feature is not present, writing integer value to this attribute is not

supported. In this case, user can use

supported. In this case, user can use the

"/sys/devices/system/cpu/cpu*/power/energy_perf_bias" interface.



[Note that tasks may by migrated from one CPU to another by the scheduler's