Commit 6858d498 authored by Arce, Abraham's avatar Arce, Abraham Committed by Jiri Kosina
Browse files

EEPROM: max6875: Header file cleanup 



Change max6875.c  header file to format as in conventions

Signed-off-by: default avatarAbraham Arce <x0066660@ti.com>
Acked-by: default avatarWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent 654087fa

drivers/misc/eeprom/max6875.c

+26 −26
Original line number Diff line number Diff line 
/*

    max6875.c - driver for MAX6874/MAX6875



    Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com>



    Based on eeprom.c



    The MAX6875 has a bank of registers and two banks of EEPROM.

    Address ranges are defined as follows:

     * 0x0000 - 0x0046 = configuration registers

     * 0x8000 - 0x8046 = configuration EEPROM

     * 0x8100 - 0x82FF = user EEPROM



    This driver makes the user EEPROM available for read.



    The registers & config EEPROM should be accessed via i2c-dev.



    The MAX6875 ignores the lowest address bit, so each chip responds to

    two addresses - 0x50/0x51 and 0x52/0x53.



    Note that the MAX6875 uses i2c_smbus_write_byte_data() to set the read

    address, so this driver is destructive if loaded for the wrong EEPROM chip.



    This program is free software; you can redistribute it and/or modify

    it under the terms of the GNU General Public License as published by

    the Free Software Foundation; version 2 of the License.

 * max6875.c - driver for MAX6874/MAX6875

 *

 * Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com>

 *

 * Based on eeprom.c

 *

 * The MAX6875 has a bank of registers and two banks of EEPROM.

 * Address ranges are defined as follows:

 *  * 0x0000 - 0x0046 = configuration registers

 *  * 0x8000 - 0x8046 = configuration EEPROM

 *  * 0x8100 - 0x82FF = user EEPROM

 *

 * This driver makes the user EEPROM available for read.

 *

 * The registers & config EEPROM should be accessed via i2c-dev.

 *

 * The MAX6875 ignores the lowest address bit, so each chip responds to

 * two addresses - 0x50/0x51 and 0x52/0x53.

 *

 * Note that the MAX6875 uses i2c_smbus_write_byte_data() to set the read

 * address, so this driver is destructive if loaded for the wrong EEPROM chip.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; version 2 of the License.

 */



#include <linux/kernel.h>