Commit 64185220 authored by Rafał Miłecki's avatar Rafał Miłecki Committed by Richard Weinberger
Browse files

dt-bindings: mtd: move partition binding to its own file 



Single partition binding is quite common and may be:
1. Used by multiple parsers
2. Extended for more specific cases

Move it to separated file to avoid code duplication.

Signed-off-by: default avatarRafał Miłecki <rafal@milecki.pl>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarRichard Weinberger <richard@nod.at>
parent b491f90d

Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml

+1 −32
Original line number Diff line number Diff line
@@ -27,38 +27,7 @@ properties: 


patternProperties:

  "@[0-9a-f]+$":

    description: node describing a single flash partition

    type: object



    properties:

      reg:

        description: partition's offset and size within the flash

        maxItems: 1



      label:

        description: The label / name for this partition. If omitted, the label

          is taken from the node name (excluding the unit address).



      read-only:

        description: This parameter, if present, is a hint that this partition

          should only be mounted read-only. This is usually used for flash

          partitions containing early-boot firmware images or data which should

          not be clobbered.

        type: boolean



      lock:

        description: Do not unlock the partition at initialization time (not

          supported on all devices)

        type: boolean



      slc-mode:

        description: This parameter, if present, allows one to emulate SLC mode

          on a partition attached to an MLC NAND thus making this partition

          immune to paired-pages corruptions

        type: boolean



    required:

      - reg

    $ref: "partition.yaml#"



required:

  - "#address-cells"

Documentation/devicetree/bindings/mtd/partitions/partition.yaml

0 → 100644
+47 −0
Original line number Diff line number Diff line 
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause

%YAML 1.2

---

$id: http://devicetree.org/schemas/mtd/partitions/partition.yaml#

$schema: http://devicetree.org/meta-schemas/core.yaml#



title: Partition



description: |

  This binding describes a single flash partition. Each partition must have its

  relative offset and size specified. Depending on partition function extra

  properties can be used.



maintainers:

  - Rafał Miłecki <rafal@milecki.pl>



properties:

  reg:

    description: partition's offset and size within the flash

    maxItems: 1



  label:

    description: The label / name for this partition. If omitted, the label

      is taken from the node name (excluding the unit address).



  read-only:

    description: This parameter, if present, is a hint that this partition

      should only be mounted read-only. This is usually used for flash

      partitions containing early-boot firmware images or data which should

      not be clobbered.

    type: boolean



  lock:

    description: Do not unlock the partition at initialization time (not

      supported on all devices)

    type: boolean



  slc-mode:

    description: This parameter, if present, allows one to emulate SLC mode

      on a partition attached to an MLC NAND thus making this partition

      immune to paired-pages corruptions

    type: boolean



required:

  - reg



additionalProperties: true