scsi: docs: convert dc395x.txt to ReST (62e3bfa4) · Commits · EulixOS / Software / Kernel

Documentation/scsi/dc395x.txt→Documentation/scsi/dc395x.rst

+47 −32

Original line number	Diff line number	Diff line
		.. SPDX-License-Identifier: GPL-2.0

		======================================
		README file for the dc395x SCSI driver
		==========================================
		======================================

		Status
		------
		@@ -25,7 +28,7 @@ parameters).

		The following parameters are available:

		- safe
		safe
		Default: 0, Acceptable values: 0 or 1

		If safe is set to 1 then the adapter will use conservative
		@@ -33,52 +36,63 @@ The following parameters are available:

		shortcut for dc395x=7,4,9,15,2,10

		- adapter_id
		adapter_id
		Default: 7, Acceptable values: 0 to 15

		Sets the host adapter SCSI ID.

		- max_speed
		max_speed
		Default: 1, Acceptable value: 0 to 7
		0 = 20 Mhz
		1 = 12.2 Mhz
		2 = 10 Mhz
		3 = 8 Mhz
		4 = 6.7 Mhz
		5 = 5.8 Hhz
		6 = 5 Mhz
		7 = 4 Mhz

		- dev_mode

		== ========
		0 20 Mhz
		1 12.2 Mhz
		2 10 Mhz
		3 8 Mhz
		4 6.7 Mhz
		5 5.8 Hhz
		6 5 Mhz
		7 4 Mhz
		== ========

		dev_mode
		Bitmap for device configuration

		DevMode bit definition:

		=== ======== ======== =========================================
		Bit Val(hex) Val(dec) Meaning
		*0 0x01 1 Parity check
		*1 0x02 2 Synchronous Negotiation
		*2 0x04 4 Disconnection
		*3 0x08 8 Send Start command on startup. (Not used)
		*4 0x10 16 Tagged Command Queueing
		*5 0x20 32 Wide Negotiation

		- adapter_mode
		=== ======== ======== =========================================
		0 0x01 1 Parity check
		1 0x02 2 Synchronous Negotiation
		2 0x04 4 Disconnection
		3 0x08 8 Send Start command on startup. (Not used)
		4 0x10 16 Tagged Command Queueing
		5 0x20 32 Wide Negotiation
		=== ======== ======== =========================================

		adapter_mode
		Bitmap for adapter configuration

		AdaptMode bit definition

		===== ======== ======== ====================================================
		Bit Val(hex) Val(dec) Meaning
		*0 0x01 1 Support more than two drives. (Not used)
		*1 0x02 2 Use DOS compatible mapping for HDs greater than 1GB.
		*2 0x04 4 Reset SCSI Bus on startup.
		*3 0x08 8 Active Negation: Improves SCSI Bus noise immunity.
		===== ======== ======== ====================================================
		0 0x01 1 Support more than two drives. (Not used)
		1 0x02 2 Use DOS compatible mapping for HDs greater than 1GB.
		2 0x04 4 Reset SCSI Bus on startup.
		3 0x08 8 Active Negation: Improves SCSI Bus noise immunity.
		4 0x10 16 Immediate return on BIOS seek command. (Not used)
		(*)5 0x20 32 Check for LUNs >= 1.
		===== ======== ======== ====================================================

		- tags
		tags
		Default: 3, Acceptable values: 0-5

		The number of tags is 1<<x, if x has been specified

		- reset_delay
		reset_delay
		Default: 1, Acceptable values: 0-180

		The seconds to not accept commands after a SCSI Reset
		@@ -95,6 +109,7 @@ License (GPL). Please read it, before using this driver. It should be
		included in your kernel sources and with your distribution. It carries the
		filename COPYING. If you don't have it, please ask me to send you one by
		email.

		Note: The GNU GPL says also something about warranty and liability.
		Please be aware the following: While we do my best to provide a working and
		reliable driver, there is a chance, that it will kill your valuable data.

Documentation/scsi/index.rst

+1 −0

Original line number	Diff line number	Diff line
		@@ -17,5 +17,6 @@ Linux SCSI Subsystem
		bnx2fc
		BusLogic
		cxgb3i
		dc395x

		scsi_transport_srp/figures

MAINTAINERS

+1 −1

Original line number	Diff line number	Diff line
		@@ -4681,7 +4681,7 @@ L: dc395x@twibble.org
		W: http://twibble.org/dist/dc395x/
		W: http://lists.twibble.org/mailman/listinfo/dc395x/
		S: Maintained
		F: Documentation/scsi/dc395x.txt
		F: Documentation/scsi/dc395x.rst
		F: drivers/scsi/dc395x.*

		DCCP PROTOCOL

drivers/scsi/Kconfig

+1 −1

Original line number	Diff line number	Diff line
		@@ -1187,7 +1187,7 @@ config SCSI_DC395x
		This driver works, but is still in experimental status. So better
		have a bootable disk and a backup in case of emergency.

		Documentation can be found in <file:Documentation/scsi/dc395x.txt>.
		Documentation can be found in <file:Documentation/scsi/dc395x.rst>.

		To compile this driver as a module, choose M here: the
		module will be called dc395x.