Commit 5f3ae016 authored by Marlon Rac Cambasis's avatar Marlon Rac Cambasis Committed by Rob Herring
Browse files

Docs: Fixing spelling errors in Documentation/devicetree/bindings/ 



Revised patch fixing six spelling errors within
Documentation/devicetree/bindings/. "specfied" replaced with "specified"
in all three files modified. "atleast" seperated into "at least" three
times in samsung-pinctrl.txt. This should remove any confusion that a
reader might have.

Signed-off-by: default avatarMarlon Rac Cambasis <marlonrc08@gmail.com>
Link: https://lore.kernel.org/r/20201007071705.GA11381@marlonpc-debian


Signed-off-by: default avatarRob Herring <robh@kernel.org>
parent 12d1f4c3

Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt

+3 −3
Original line number Diff line number Diff line
@@ -75,7 +75,7 @@ Required Properties: 
  The child node should contain a list of pin(s) on which a particular pin

  function selection or pin configuration (or both) have to applied. This

  list of pins is specified using the property name "samsung,pins". There

  should be atleast one pin specfied for this property and there is no upper

  should be at least one pin specified for this property and there is no upper

  limit on the count of pins that can be specified. The pins are specified

  using pin names which are derived from the hardware manual of the SoC. As

  an example, the pins in GPA0 bank of the pin controller can be represented

Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt

+1 −1
Original line number Diff line number Diff line
@@ -9,7 +9,7 @@ Optional property: 
- nuvoton,sw-reset-number - Contains the software reset number to restart the SoC.

  NPCM7xx contain four software reset that represent numbers 1 to 4.



  If 'nuvoton,sw-reset-number' is not specfied software reset is disabled.

  If 'nuvoton,sw-reset-number' is not specified software reset is disabled.



Example:

	rstc: rstc@f0801000 {

Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt

+1 −1
Original line number Diff line number Diff line
@@ -20,7 +20,7 @@ Optional properties: 
   This is useful in situations where another watchdog engine on chip is

   to perform the reset.



   If 'aspeed,reset-type=' is not specfied the default is to enable system

   If 'aspeed,reset-type=' is not specified the default is to enable system

   reset.



   Reset types: