Commit 59bf8964 authored Apr 18, 2012 by Masanari Iida Committed by Jiri Kosina Apr 18, 2012

Fix "the the" in various Kconfig



Fix typo "the the" in various Kconfig.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

parent 3773b454

arch/arm/Kconfig

+2 −2

Original line number	Diff line number	Diff line
		@@ -1927,10 +1927,10 @@ choice
		default ZBOOT_ROM_NONE
		help
		Include experimental SD/MMC loading code in the ROM-able zImage.
		With this enabled it is possible to write the the ROM-able zImage
		With this enabled it is possible to write the ROM-able zImage
		kernel image to an MMC or SD card and boot the kernel straight
		from the reset vector. At reset the processor Mask ROM will load
		the first part of the the ROM-able zImage which in turn loads the
		the first part of the ROM-able zImage which in turn loads the
		rest the kernel image to RAM.

		config ZBOOT_ROM_NONE

arch/arm/mach-s3c64xx/Kconfig

+2 −2

Original line number	Diff line number	Diff line
		@@ -210,7 +210,7 @@ config SMDK6410_WM1190_EV1
		and audio daughtercard for the Samsung SMDK6410 reference
		platform. Enabling this option will build support for this
		module into the kernel. The presence of the module will be
		detected at runtime so the the resulting kernel can be used
		detected at runtime so the resulting kernel can be used
		with or without the 1190-EV1 fitted.

		config SMDK6410_WM1192_EV1
		@@ -226,7 +226,7 @@ config SMDK6410_WM1192_EV1
		daughtercard for the Samsung SMDK6410 reference platform.
		Enabling this option will build support for this module into
		the kernel. The presence of the daughtercard will be
		detected at runtime so the the resulting kernel can be used
		detected at runtime so the resulting kernel can be used
		with or without the 1192-EV1 fitted.

		config MACH_NCP

arch/blackfin/Kconfig

+1 −1

Original line number	Diff line number	Diff line
		@@ -1258,7 +1258,7 @@ config PM_BFIN_WAKE_GP
		(all processors, except ADSP-BF549). This option sets
		the general-purpose wake-up enable (GPWE) control bit to enable
		wake-up upon detection of an active low signal on the /GPW (PH7) pin.
		On ADSP-BF549 this option enables the the same functionality on the
		On ADSP-BF549 this option enables the same functionality on the
		/MRXON pin also PH7.

		endmenu

drivers/iommu/Kconfig

+2 −2

Original line number	Diff line number	Diff line
		@@ -43,7 +43,7 @@ config AMD_IOMMU
		With this option you can enable support for AMD IOMMU hardware in
		your system. An IOMMU is a hardware component which provides
		remapping of DMA memory accesses from devices. With an AMD IOMMU you
		can isolate the the DMA memory of different devices and protect the
		can isolate the DMA memory of different devices and protect the
		system from misbehaving device drivers or hardware.

		You can find out if your system has an AMD IOMMU if you look into
		@@ -67,7 +67,7 @@ config AMD_IOMMU_V2
		---help---
		This option enables support for the AMD IOMMUv2 features of the IOMMU
		hardware. Select this option if you want to use devices that support
		the the PCI PRI and PASID interface.
		the PCI PRI and PASID interface.

		# Intel IOMMU support
		config DMAR_TABLE

drivers/net/can/sja1000/Kconfig

+1 −1

Original line number	Diff line number	Diff line
		@@ -75,7 +75,7 @@ config CAN_KVASER_PCI
		tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
		depends on PCI
		---help---
		This driver is for the the PCIcanx and PCIcan cards (1, 2 or
		This driver is for the PCIcanx and PCIcan cards (1, 2 or
		4 channel) from Kvaser (http://www.kvaser.com).

		config CAN_PLX_PCI