Commit 5905959b authored Oct 21, 2024 by Tomi Valkeinen Committed by Wentao Guan Mar 31, 2025

drm/tidss: Fix issue in irq handling causing irq-flood issue

stable inclusion
from stable-v6.6.79
commit f99429229916bc8f2bcd36f6ee0882483a0ddf13
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/IBXANC

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f99429229916bc8f2bcd36f6ee0882483a0ddf13



--------------------------------

commit 44b6730ab53ef04944fbaf6da0e77397531517b7 upstream.

It has been observed that sometimes DSS will trigger an interrupt and
the top level interrupt (DISPC_IRQSTATUS) is not zero, but the VP and
VID level interrupt-statuses are zero.

As the top level irqstatus is supposed to tell whether we have VP/VID
interrupts, the thinking of the driver authors was that this particular
case could never happen. Thus the driver only clears the DISPC_IRQSTATUS
bits which has corresponding interrupts in VP/VID status. So when this
issue happens, the driver will not clear DISPC_IRQSTATUS, and we get an
interrupt flood.

It is unclear why the issue happens. It could be a race issue in the
driver, but no such race has been found. It could also be an issue with
the HW. However a similar case can be easily triggered by manually
writing to DISPC_IRQSTATUS_RAW. This will forcibly set a bit in the
DISPC_IRQSTATUS and trigger an interrupt, and as the driver never clears
the bit, we get an interrupt flood.

To fix the issue, always clear DISPC_IRQSTATUS. The concern with this
solution is that if the top level irqstatus is the one that triggers the
interrupt, always clearing DISPC_IRQSTATUS might leave some interrupts
unhandled if VP/VID interrupt statuses have bits set. However, testing
shows that if any of the irqstatuses is set (i.e. even if
DISPC_IRQSTATUS == 0, but a VID irqstatus has a bit set), we will get an
interrupt.

Co-developed-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Co-developed-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Co-developed-by: Jonathan Cormier <jcormier@criticallink.com>
Signed-off-by: Jonathan Cormier <jcormier@criticallink.com>
Fixes: 32a1795f ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Cc: stable@vger.kernel.org
Tested-by: Jonathan Cormier <jcormier@criticallink.com>
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241021-tidss-irq-fix-v1-1-82ddaec94e4a@ideasonboard.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit f99429229916bc8f2bcd36f6ee0882483a0ddf13)
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>

parent 14f04352

drivers/gpu/drm/tidss/tidss_dispc.c

+4 −8

Original line number	Diff line number	Diff line
		@@ -726,24 +726,20 @@ static
		void dispc_k3_clear_irqstatus(struct dispc_device *dispc, dispc_irq_t clearmask)
		{
		unsigned int i;
		u32 top_clear = 0;

		for (i = 0; i < dispc->feat->num_vps; ++i) {
		if (clearmask & DSS_IRQ_VP_MASK(i)) {
		if (clearmask & DSS_IRQ_VP_MASK(i))
		dispc_k3_vp_write_irqstatus(dispc, i, clearmask);
		top_clear \|= BIT(i);
		}
		}
		for (i = 0; i < dispc->feat->num_planes; ++i) {
		if (clearmask & DSS_IRQ_PLANE_MASK(i)) {
		if (clearmask & DSS_IRQ_PLANE_MASK(i))
		dispc_k3_vid_write_irqstatus(dispc, i, clearmask);
		top_clear \|= BIT(4 + i);
		}
		}
		if (dispc->feat->subrev == DISPC_K2G)
		return;

		dispc_write(dispc, DISPC_IRQSTATUS, top_clear);
		/* always clear the top level irqstatus */
		dispc_write(dispc, DISPC_IRQSTATUS, dispc_read(dispc, DISPC_IRQSTATUS));

		/* Flush posted writes */
		dispc_read(dispc, DISPC_IRQSTATUS);