Commit 5668d088 authored by Pawel Dembicki's avatar Pawel Dembicki Committed by Gregory CLEMENT
Browse files

ARM: dts: kirkwood: Add Endian 4i Edge 200 board 



Add Endian 4i Edge 200 is 5-port firewall.
It have also clone: Endian UTM Mini (The same hardware, with added WLAN
card).

Hardware:
  - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz
  - Ram: 512MB (4x Nanya NT5TU128M8GE-AC)
  - NAND Flash: 512MB (Micron 29F4G08AAC)
  - Lan 1-4: 4x GBE (Marvell 88E6171R-TFJ2)
  - Lan 5: 1x GBE (Marvell 88E1116R-NNC1)
  - Storage: MicroSD Slot
  - MCPIE: MiniPCIe Slot present [fitted with SparkLan WPEA-110N/E
          (Atheros AR9280 chipset) in Endian UTM Mini WLAN only]
  - USB: 1x USB 2.0 port
  - Console: RJ-45 port
  - LEDs: 3x GPIO controlled

Signed-off-by: default avatarPawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@bootlin.com>
parent ac9a7868

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -304,6 +304,7 @@ dtb-$(CONFIG_ARCH_KEYSTONE) += \ 
	keystone-k2g-evm.dtb \

	keystone-k2g-ice.dtb

dtb-$(CONFIG_MACH_KIRKWOOD) += \

	kirkwood-4i-edge-200.dtb \

	kirkwood-b3.dtb \

	kirkwood-blackarmor-nas220.dtb \

	kirkwood-c200-v1.dtb \

arch/arm/boot/dts/kirkwood-4i-edge-200.dts

0 → 100644
+205 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)

/*

 * Endian 4i Edge 200 Board Description

 * Note: Endian UTM Mini is hardware clone of Endian Edge 200

 * Copyright 2021-2022 Pawel Dembicki <paweldembicki@gmail.com>

 */



/dts-v1/;



#include "kirkwood.dtsi"

#include "kirkwood-6281.dtsi"

#include <dt-bindings/leds/common.h>



/ {

	model = "Endian 4i Edge 200";

	compatible = "endian,4i-edge-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";



	memory {

		device_type = "memory";

		reg = <0x00000000 0x20000000>;

	};



	chosen {

		bootargs = "console=ttyS0,115200n8";

		stdout-path = &uart0;

	};



	leds {

		compatible = "gpio-leds";

		pinctrl-0 = <&pmx_led>;

		pinctrl-names = "default";



		led-1 {

			function = LED_FUNCTION_SD;

			color = <LED_COLOR_ID_AMBER>;

			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "mmc0";

		};



		led-2 {

			function = LED_FUNCTION_STATUS;

			color = <LED_COLOR_ID_AMBER>;

			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;

		};



		led-3 {

			function = LED_FUNCTION_STATUS;

			color = <LED_COLOR_ID_GREEN>;

			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;

		};

	};

};



&eth0 {

	status = "okay";

};



&eth0port {

	speed = <1000>;

	duplex = <1>;

};



&eth1 {

	status = "okay";

};



&eth1port {

	phy-handle = <&ethphyb>;

};



&mdio {

	status = "okay";



	ethphyb: ethernet-phy@b {

		reg = <0x0b>;



		marvell,reg-init =

			/* link-activity, bi-color mode 4 */

			<3 0x10 0xfff0 0xf>; /* Reg 3,16 <- 0xzzzf */

	};



	switch0: switch@11 {

		compatible = "marvell,mv88e6085";

		reg = <0x11>;



		ports {

			#address-cells = <1>;

			#size-cells = <0>;



			port@0 {

				reg = <0>;

				label = "port1";

			};



			port@1 {

				reg = <1>;

				label = "port2";

			};



			port@2 {

				reg = <2>;

				label = "port3";

			};



			port@3 {

				reg = <3>;

				label = "port4";

			};



			port@5 {

				reg = <5>;

				phy-mode = "rgmii-id";

				ethernet = <&eth0port>;



				fixed-link {

					speed = <1000>;

					full-duplex;

				};

			};

		};

	};

};



&nand {

	status = "okay";

	pinctrl-0 = <&pmx_nand>;

	pinctrl-names = "default";



	partition@0 {

		label = "u-boot";

		reg = <0x00000000 0x000a0000>;

		read-only;

	};



	partition@a0000 {

		label = "u-boot-env";

		reg = <0x000a0000 0x00060000>;

		read-only;

	};



	partition@100000 {

		label = "kernel";

		reg = <0x00100000 0x00400000>;

	};



	partition@500000 {

		label = "ubi";

		reg = <0x00500000 0x1fb00000>;

	};

};



&pciec {

	status = "okay";

};



&pcie0 {

	status = "okay";

};



&pinctrl {

	pinctrl-0 = <&pmx_sysrst>;

	pinctrl-names = "default";



	pmx_sysrst: pmx-sysrst {

		marvell,pins = "mpp6";

		marvell,function = "sysrst";

	};



	pmx_sdio_cd: pmx-sdio-cd {

		marvell,pins = "mpp28";

		marvell,function = "gpio";

	};



	pmx_led: pmx-led {

		marvell,pins = "mpp34", "mpp35", "mpp49";

		marvell,function = "gpio";

	};

};



&rtc {

	status = "okay";

};



&sata_phy0 {

	status = "disabled";

};



&sata_phy1 {

	status = "disabled";

};



&sdio {

	pinctrl-0 = <&pmx_sdio_cd>;

	pinctrl-names = "default";

	status = "okay";

	cd-gpios = <&gpio0 28 9>;

};



&uart0 {

	status = "okay";

};



&usb0 {

	status = "okay";

};